Skylumate QIYIMEILUX 19.7-inch Dimmable Moon Wall Sconce Instruction Manual

1. Product Overview

This manual provides instructions for the Skylumate QIYIMEILUX 19.7-inch Dimmable Moon Wall Sconce. This modern LED wall light offers adjustable brightness and color temperature, along with a night light mode, and can be installed as a plug-in or hardwired fixture.

An overview of the Skylumate QIYIMEILUX 19.7-inch Dimmable Moon Wall Sconce, showcasing its design, remote control, and power options.

Key Features:

• Dimmable Functionality: Stepless brightness adjustment from 10% to 100%.
• Adjustable Color Temperature: Stepless color temperature settings ranging from 3000K (Warm Light) to 6000K (White Light).
• Quick Light Color Switch: Easily switch between White Light, Natural Light, and Warm Light.
• Night Light Mode: Dedicated 2W mode for subtle illumination.
• Dual Installation Options: Can be installed as a plug-in unit or hardwired.
• Versatile Placement: Suitable for use as a wall lamp or ceiling light.
• Dimensions: Approximately 19.7 inches (L) x 19.7 inches (W) x 1.6 inches (H).
• Power Output: 24W, 2100 Lumens.

Package Contents:

• 1 x Moon Wall Sconce
• 1 x Remote Control
• 1 x 6ft Plug-in Cord (pre-attached)
• Installation Hardware (screws, wall anchors)

2. Safety Information

Please read all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect power at the circuit breaker before installing, cleaning, or performing any maintenance on the fixture.
• This product is designed for indoor use only. Do not expose to moisture or outdoor elements.
• Ensure that the voltage supply matches the requirements of the fixture (110V).
• Do not attempt to modify the fixture or its components.
• Keep the remote control away from water and extreme temperatures.
• Consult a qualified electrician if you are unsure about any part of the installation process.

3. Installation

Tools Required:

• Phillips Head Screwdriver
• Drill with appropriate drill bits (e.g., 3/16 inch for wall anchors)
• Pencil
• Measuring Tape

Pre-Installation:

1. Carefully unpack all components and inspect for any damage.
2. Choose a suitable location for mounting the wall sconce.

Mounting Bracket Installation:

1. Position the mounting bracket on the wall at the desired location.
2. Mark the drill points through the holes in the bracket.
3. Drill pilot holes at the marked points. Insert wall anchors if drilling into drywall.
4. Secure the mounting bracket to the wall using the provided screws.

Method 1: Plug-in Installation

1. Ensure the pre-attached 6ft plug-in cord is securely connected to the fixture.
2. Mount the moon wall sconce onto the installed mounting bracket.
3. Plug the cord into a standard 110V wall outlet.
4. Route and secure the cord neatly using cable clips (not included) if desired.

Method 2: Hardwire Installation

1. WARNING: Turn off power at the circuit breaker before beginning.
2. If the plug-in cord is attached, carefully remove it from the fixture.
3. Connect the fixture's wires to the corresponding household electrical wires:
   • Connect the Live (L) wire from the fixture to the household Live wire.
   • Connect the Neutral (N) wire from the fixture to the household Neutral wire.
   • Connect the Ground (E) wire from the fixture to the household Ground wire.
   Use appropriate wire connectors (e.g., wire nuts or Wago connectors) to secure all connections.
4. Carefully tuck all wires into the electrical box.
5. Mount the moon wall sconce onto the installed mounting bracket, ensuring it is flush against the wall.
6. Restore power at the circuit breaker.

Visual guide illustrating the two available installation methods: direct plug-in to an outlet or hardwiring to an electrical box.

4. Operation

The moon wall sconce can be operated using the included remote control or a standard wall switch.

Remote Control Functions:

This image shows the remote control and its functions for adjusting brightness from 10% to 100% and color temperature from 3000K (Warm) to 6000K (White).

• Power On/Off: Press the ON or OFF button to turn the light on or off.
• Brightness Adjustment: Use the Brightness + and Brightness - buttons to steplessly adjust the light intensity from 10% to 100%.
• Color Temperature Adjustment: Use the Color Temperature + and Color Temperature - buttons to steplessly change the light color from 3000K (warm) to 6000K (cool).
• Quick Color Switch: Dedicated buttons allow for quick selection of:
  • White Light (6000K)
  • Natural Light (4000K)
  • Warm Light (3000K)
• Night Light Mode: Press the Night Light button to activate the 2W night light mode.

The moon wall sconce operating in its low-power night light mode, ideal for subtle illumination.

Wall Switch Operation:

When connected to a wall switch, the fixture will turn on/off with the switch. Note that some settings (brightness, color temperature) may reset to a default state if power is frequently cycled via the wall switch. For consistent settings, use the remote control.

5. Maintenance

• Cleaning: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic lampshade.
• LED Light Source: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture should be replaced.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For detailed warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official Skylumate website. You may also contact Skylumate customer service directly for assistance.