UniCarScan UCSI-2100 OBD2 Bluetooth 4.0 Scanner User Manual

Introduction

The UniCarScan UCSI-2100 is an OBD2 Bluetooth 4.0 diagnostic adapter designed for vehicle diagnostics and coding. It is compatible with various applications for iOS, Android, and Windows devices, specifically optimized for use with BimmerCode, BimmerLink, and MotoScan apps for BMW, Mini, and Toyota Supra vehicles, as well as BMW motorcycles.

This manual provides instructions for setting up and operating your UniCarScan UCSI-2100 device.

Package Contents

Verify that your package contains the following items:

• UniCarScan UCSI-2100 OBD2 Bluetooth Adapter
• User Manual (this document)

Image: The UniCarScan UCSI-2100 device shown alongside its retail packaging and a printed manual.

Setup Guide

1. Step 1: Plug the adapter into your car's OBD2 port.

   Locate the OBD2 diagnostic port in your vehicle, typically found under the dashboard on the driver's side. Insert the UniCarScan UCSI-2100 adapter firmly into the port.

   

   Image: Illustration showing the UniCarScan adapter being plugged into a vehicle's OBD2 port.

2. Step 2: Turn on the car engine or ignition.

   Ensure your vehicle's ignition is on, or the engine is running, to power the OBD2 port and the UniCarScan adapter. Follow any specific instructions provided by your chosen diagnostic application.

   

   Image: A hand pressing a car's engine start/stop button, indicating the ignition is on.
3. Step 3: Enable Bluetooth on your device and disconnect from other devices.

   Activate Bluetooth on your smartphone or tablet. For optimal connection, ensure your device is not currently paired with or connected to other Bluetooth accessories, except for the UniCarScan adapter.

   

   Image: A smartphone screen showing Bluetooth, Wi-Fi, and Airplane mode icons, with Bluetooth enabled.

4. Step 4 (Android ONLY): Pair the adapter with your device.

   For Android devices, navigate to your device's Bluetooth settings and pair with the "UniCarScan" adapter. The default PIN is 1234. No pairing is required for iOS devices through the system settings.

   

   Image: Graphic illustrating a smartphone connecting to the UniCarScan adapter via Bluetooth.

5. Step 5: Open the diagnostic application.

   Launch your preferred diagnostic application (e.g., BimmerCode, BimmerLink, MotoScan) on your device. Follow the in-app instructions to connect to the UniCarScan adapter.

   

   Image: A smartphone screen displaying the BimmerCode app's initial connection interface.
6. Step 6: Select the UniCarScan adapter within the app.

   Within the app's settings or connection menu, select "UniCarScan" (or "UniCarScan UCSI-2100/2100") as your OBD adapter. Proceed with the connection process as prompted by the application.

   

   Image: A smartphone screen showing a list of OBD adapters, with "UniCarScan UCSI-2100/2100" selected.

Operating Instructions

The UniCarScan UCSI-2100 functions as an interface between your vehicle's OBD2 system and your smart device. Its primary operation is managed through compatible third-party applications.

Supported Applications

The adapter is officially recommended for and fully compatible with the following applications:

• BimmerCode: For extensive coding of BMW, Mini, and Toyota Supra cars.
• BimmerLink: For comprehensive diagnostics and maintenance of BMW, Mini, and Toyota Supra cars.
• MotoScan: For professional diagnostics of BMW motorcycles.

Additionally, it is compatible with most ELM327 applications for general OBD2 diagnostics.

Image: BimmerCode app interface, demonstrating coding capabilities for BMW, Mini, and Toyota Supra vehicles.

Image: BimmerLink app interface, showing diagnostic and maintenance functions for BMW, Mini, and Toyota Supra vehicles.

Image: MotoScan app interface, designed for professional diagnostics of BMW motorcycles.

General Usage

Once connected, the specific functions available will depend on the application you are using. Refer to the documentation or in-app guides of your chosen application for detailed instructions on performing diagnostics, coding, or monitoring vehicle parameters.

Note: The cost of third-party applications is not included with the UniCarScan UCSI-2100 adapter.

Supported Vehicles and Motorcycles

• Cars: Compatible with all gas-powered vehicles made in 2001 or newer and all diesel vehicles made in 2004 or newer. Specifically optimized for BMW, Mini, and Toyota Supra models.
• Motorcycles: Compatible with all BMW motorcycles made in 1998 or newer, ideal for use with the MotoScan app.

Supported Protocols and Software

OBD2 Protocols:

• ISO9141-2
• KWP2000 slow init
• KWP2000 fast init
• CAN 11bit/250kB
• CAN 11bit/500kB
• CAN 29bit/250kB
• CAN 29bit/500kB

BMW Protocols:

• KWP2000
• KWP2000*
• D-CAN
• UDS

Supported Software by Operating System:

Important Notes and Troubleshooting

• iOS Device Connection: For Apple devices, direct pairing through iOS settings is not required and typically not possible. Connect directly within the Car Scanner or BimmerCode/BimmerLink app by selecting "UniCarScan" as the adapter.
• Android Device Connection: For Android devices, "UniCarScan" must be paired in your device's Bluetooth settings before connecting within the app.
• MotoScan App: The MotoScan App is not available for iOS devices and there are currently no plans for iOS compatibility.
• App Costs: The purchase price of the UniCarScan UCSI-2100 adapter does not include the cost of any third-party applications. These apps may require separate purchases or subscriptions.
• Connection Issues: If you experience difficulty connecting, ensure Bluetooth is enabled, the adapter is firmly seated in the OBD2 port, and the vehicle's ignition is on. Try restarting both the app and your device.

Specifications

Product Overview Video

Support and Warranty Information

For technical support, frequently asked questions, and additional resources, please visit the official support website:

https://support.ucsi.app/

You may also contact support via email:

support@wgsoft.de

The product is manufactured by WGSoft.de.

For warranty details, please refer to the terms and conditions provided at the time of purchase or contact the manufacturer directly through their support channels.

Image: Product packaging displaying support website and email for WGSoft.de.