WOBSION 16.4ft White LED Strip Lights User Manual

1. Introduction

Thank you for choosing the WOBSION 16.4ft White LED Strip Lights. This product provides versatile and dimmable 6000K white lighting, controllable via Bluetooth app, IR remote, or the included controller. Designed for various indoor applications such as bedrooms, kitchen cabinets, and mirrors, these self-adhesive LED strips offer easy installation and customizable lighting experiences. Please read this manual thoroughly before installation and use to ensure proper operation and safety.

2. Product Overview

Key Features:

• Smart App Control: Control the lights via Bluetooth from up to 30-50 feet away. Connect up to 4 light strips simultaneously through the app.
• Multiple Control Methods: Operate using the Bluetooth app, IR remote, or the physical controller.
• Adjustable Brightness & Dynamic Modes: Dimmable with 6-level brightness (10%-100%) in daylight white (6000K). Features 3 dynamic modes: Flash transition, Slow change fast, and White Gradient.
• Timing On/Off Function: Set schedules for the lights to turn on or off automatically, including specific days of the week, via the Bluetooth app.
• Easy Installation: Self-adhesive backing and included snap clips ensure secure mounting.
• Cuttable and Linkable: Customize the length by cutting along marked lines and connecting with 2-pin connectors.

Package Contents:

• 1x 16.4ft (5m) White LED Strip Light (6000K)
• 1x IR Remote Control
• 1x Bluetooth Controller
• 1x 12V Power Adapter
• 2x 2-pin Connectors
• 2x 2-pin Unwired Clips
• 1x User Manual

Image: Components of the WOBSION LED Strip Light kit, including the LED strip, remote, controller, and power adapter.

3. Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• Use only the provided power adapter. Using an incompatible adapter may damage the product or pose a fire hazard.
• The LED strip is designed for indoor use only and is not water-resistant. Avoid exposure to water or high humidity.
• Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
• Keep the product away from heat sources and flammable materials.
• Do not stare directly into the LED lights for extended periods, as this may cause eye strain.
• The power adapter can get warm during operation. Ensure adequate ventilation around it.

Image: The 12W ETL Listed power adapter, indicating safety compliance for DC 12V operation.

4. Setup and Installation

4.1 Preparation:

• Unroll the LED strip completely before powering it on to prevent overheating.
• Clean the surface where you intend to install the strip. Ensure it is dry, smooth, and free of dust or grease for optimal adhesion.
• Measure the desired length for your installation.

4.2 Cutting and Linking (Optional):

If the strip length exceeds your requirement, you can cut it. Look for the dotted cut marks between every 3 LEDs. Cut only along these designated lines. To link cut sections or extend the strip, use the provided 2-pin connectors or unwired clips.

Image: Illustration of cutting the LED strip along the dotted lines and using 2-pin connectors for linking.

Cutting the strip

Using 18cm connectors

Using 2-pin unwired clips

4.3 Mounting the LED Strip:

1. Peel off the backing tape from the LED strip, exposing the adhesive.
2. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
3. For added security, especially on textured surfaces or corners, use the included snap clips.

4.4 Connecting Power:

1. Connect the LED strip to the Bluetooth controller. Ensure the arrows on the connectors align.
2. Connect the Bluetooth controller to the 12V power adapter.
3. Plug the power adapter into a standard electrical outlet.

5. Operating Instructions

5.1 Bluetooth App Control:

1. Download the companion app (e.g., "HappyLighting" or similar, check product packaging for exact app name) from your device's app store (iOS/Android).
2. Ensure Bluetooth is enabled on your smartphone.
3. Open the app. The app should automatically detect and connect to the LED strip. If not, follow the in-app instructions to add a device.
4. Once connected, you can:
   • Adjust brightness (10%-100%).
   • Select from 3 dynamic modes: Flash transition, Slow change fast, and White Gradient.
   • Set timing schedules for the lights to turn on/off, including specific days of the week.
   • Control up to 4 light strips simultaneously.

Image: Screenshots of the Bluetooth app interface showing options for dynamic modes, brightness adjustment, and timing settings.

Image: Overview of Bluetooth app control features including dynamic modes, brightness adjustment, and timing.

Image: A mobile phone controlling four light strips simultaneously, demonstrating the multi-device control feature.

5.2 IR Remote Control:

Point the IR remote directly at the Bluetooth controller to operate the lights. Ensure there are no obstructions between the remote and the controller.

• ON/OFF Button: Turns the lights on or off.
• Brightness Adjustment: Use the brightness up/down buttons to adjust the light intensity (10%-100%).
• Dynamic Modes: Select from various preset dynamic modes (e.g., Flash, Fade).
• Timing Settings: Set timers for automatic shut-off (e.g., 30 min, 60 min).

Image: The IR remote control showing various buttons for power, brightness, and mode selection.

5.3 Physical Controller:

The small physical controller attached to the LED strip provides basic control if the remote or app is unavailable.

• Press the button to cycle through ON/OFF and possibly some basic modes or brightness levels.

Image: The physical controller connected to the LED strip, showing its compact design.

6. Maintenance

• Cleaning: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Storage: If storing the LED strip, ensure it is clean, dry, and rolled loosely to prevent damage.
• Adhesive Longevity: For long-term adhesion, ensure the installation surface is clean and dry. Avoid repositioning the strip frequently.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact WOBSION customer service directly. Contact details can typically be found on the manufacturer's website or through your purchase platform.