ULANZI VL119 2907

ULANZI VL119 Handheld Light Wand Instruction Manual

Brand: ULANZI | Model: VL119 2907

Introduction

This manual provides comprehensive instructions for the safe and effective use of your ULANZI VL119 Handheld Light Wand. Please read this manual thoroughly before operation and retain it for future reference.

Product Overview

The ULANZI VL119 is a versatile handheld RGB LED video light stick designed for various photography and video shooting scenarios. Key features include:

  • Portable Handheld Design: Lightweight (205g/0.45lb) and compact (50cm/19.7" length) for easy handling.
  • High Color Rendering: 114 LED beads with CRI95+ for natural, lifelike illumination.
  • Multiple Modes: RGB (0°-360° hue), CCT (2500K-9000K dimmable), and 20 scene light effects.
  • Built-in Rechargeable Battery: 2600mAh battery provides up to 70 minutes of continuous use at maximum power, rechargeable via Type-C.
  • LCD Display: For accurate and visual parameter adjustment.
  • 1/4" Interface: Standard interface for rich expansion, compatible with cameras, tripods, and light stands.
ULANZI VL119 Handheld Light Wand
Figure 1: ULANZI VL119 Handheld Light Wand with various color outputs.

Setup

Charging the Device

The VL119 has a built-in 2600mAh rechargeable battery. To charge:

  1. Locate the Type-C charging port on the back of the light wand.
  2. Connect the provided USB cable to the charging port and a suitable USB power source.
  3. A full charge takes approximately 2 hours. The device can be used while charging.
ULANZI VL119 battery and charging port
Figure 2: The VL119 features a built-in 2600mAh battery and a Type-C charging port.

Mounting Options

The VL119 is designed for versatile use and can be mounted in several ways:

  • Handheld: Its lightweight design allows for comfortable handheld use for extended periods.
  • Tripod Mounting: Utilize the standard 1/4" interface at the bottom to attach the light wand to a tripod for stable positioning.
  • Light Stand Mounting: The 1/4" interface also allows attachment to a light stand for elevated lighting setups.
ULANZI VL119 mounting options
Figure 3: The VL119 can be used handheld, or mounted on a tripod or light stand via its 1/4" screw interface.

Operating Instructions

The VL119 features an LCD display for easy parameter adjustment and mode selection.

Power On/Off

Locate the power switch on the side of the light wand to turn the device on or off.

Mode Selection

The light wand integrates three practical modes:

  • RGB Mode: Adjust hue from 0° to 360° for full-color lighting.
  • CCT Mode: Adjust color temperature from 2500K (warm) to 9000K (cold).
  • Scene Mode: Choose from 20 pre-programmed light effects to accommodate different scenarios (e.g., police car, ambulance, fire, lightning, fireworks, TV, candle, party, bad light bulb, LED indicator, stroboscopic, RGB ambulance, flash lamp, emergency lighting, light beam, red light, green light, blue light, HSI slow, HSI fast).
ULANZI VL119 RGB, CCT, and Scene Modes
Figure 4: Visual representation of RGB, CCT, and Scene modes.
ULANZI VL119 20 Scene Light Effects
Figure 5: A selection of the 20 available scene light effects.

Brightness and Color Adjustment

Use the control buttons next to the LCD display to adjust settings:

  • Brightness: Dimmable from 0% to 100%.
  • Color Temperature: Adjustable from 2500K to 9000K.
  • RGB Hue: Adjustable from 0° to 360°.
ULANZI VL119 Brightness, Color Temperature, and RGB Adjustment
Figure 6: Controls for brightness, color temperature, and RGB color adjustment.

Media Integration

Official Product Video

Watch the official product video for a dynamic overview of the ULANZI VL119 Handheld Light Wand's features and capabilities.

Video 1: ULANZI VL119 Handheld Light Wand - Official Product Overview.

Maintenance

To ensure the longevity and optimal performance of your ULANZI VL119 Handheld Light Wand, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the surface of the light wand. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to maintain battery health.
  • Battery Care: Avoid fully discharging the battery frequently. Recharge the device promptly when the battery indicator is low.
  • Handling: Handle the light wand with care to prevent drops or impacts, which could damage the LED beads or internal circuitry.

Troubleshooting

If you encounter any issues with your ULANZI VL119 Handheld Light Wand, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Device does not turn on.Low battery.
Power switch is off.
Charge the device fully.
Ensure the power switch is in the "On" position.
Light output is dim.Brightness setting is low.
Low battery.
Increase brightness using the control buttons.
Recharge the device.
Cannot change modes/colors.Incorrect button usage.
Device malfunction.
Refer to "Operating Instructions" for correct button functions.
Contact customer support if the issue persists.

Specifications

FeatureDetail
Product Dimensions19.69 x 1.46 x 19.69 inches
Item Weight10.6 ounces
Item Model NumberVL119 2907
Batteries1 Lithium Ion batteries required (included)
ManufacturerULANZI
Battery Life70 minutes (at maximum power)
Connectivity TechnologyBluetooth
Hardware InterfaceUSB

Warranty & Support

ULANZI products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official ULANZI website or contact their customer service directly.

For more information, visit the ULANZI Store on Amazon.

Related Documents - VL119 2907

Preview Ulanzi VL119 RGB LED 补光灯 用户手册
Ulanzi VL119 RGB LED 补光灯用户手册,提供产品概述、操作指南、规格参数及安全警告,帮助您充分利用这款多功能摄影照明设备。
Preview Ulanzi SK26 Portable Magnetic Selfie Stick and Tripod User Manual
User manual for the Ulanzi SK26 portable selfie stick and tripod, featuring a magnetic mount and Bluetooth remote control. Includes setup, usage instructions, and safety warnings.
Preview Ulanzi UA20C 20W RGB 气柱灯 用户手册
本用户手册详细介绍了 Ulanzi UA20C 20W RGB 磁性气柱灯。该灯提供 1800K-10000K 的宽色温范围和全彩 RGB 功能,专为直播和摄影设计。手册涵盖产品概述、包装清单、安全提示、操作指南(包括双色温、色相、特效模式)、产品参数和照度数据,是提升视觉创作效果的理想便携照明工具。
Preview Ulanzi VL120 RGB LED 补光灯 用户手册
Ulanzi VL120 RGB LED 补光灯的用户手册,提供产品概述、操作说明、规格参数、情景特效模式以及保修信息,帮助用户安全高效地使用该灯光设备。
Preview Ulanzi FM01 FILMOG Ace Portable Fog Machine User Manual
Comprehensive user manual for the Ulanzi FM01 FILMOG Ace portable fog machine, covering product introduction, specifications, operating instructions, safety guidelines, and maintenance.
Preview Ulanzi VL49 LED Camera Light - User Manual and Specifications
User manual and specifications for the Ulanzi VL49 LED camera light, detailing its features, operation, and technical specifications. Learn how to use and maintain your Ulanzi VL49 light.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.