1. Introduction
Thank you for choosing the Arebos Ice Maker AR-HE-EM22B. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice maker. Please read these instructions thoroughly before first use and retain them for future reference.
2. Safety Instructions
- Always ensure the appliance is placed on a stable, level surface away from direct sunlight and heat sources.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Keep children and pets away from the appliance during operation.
- Use only potable water in the water tank.
- Unplug the ice maker from the power outlet before cleaning, maintenance, or if not in use for an extended period.
- Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repair.
- Ensure adequate ventilation around the appliance. Do not block ventilation openings.
- This appliance is for household use only.
3. Product Overview
Familiarize yourself with the components of your Arebos Ice Maker.
Figure 3.1: The Arebos Ice Maker AR-HE-EM22B in black, shown with an included ice scoop. A smaller silver ice maker is also visible for scale comparison.
Control Panel
Figure 3.2: Detailed view of the control panel, featuring indicator lights for 'ICE FULL' and 'ADD WATER', and buttons for 'S/L' (Small/Large ice size) and 'ON/OFF'.
- Ice Full Indicator: Illuminates when the ice basket is full.
- Add Water Indicator: Illuminates when the water tank needs refilling.
- S/L Button: Selects between small and large ice cube sizes.
- ON/OFF Button: Powers the unit on or off.
- Water Tank: Located at the back, capacity 2.2 liters.
- Ice Basket: Removable basket for collecting produced ice.
- Drain Plug: Located at the bottom for water drainage.
4. Setup
- Unpacking: Carefully remove the ice maker from its packaging. Remove all packing materials, tape, and labels.
- Placement: Place the ice maker on a flat, stable, heat-resistant surface. Ensure there is at least 10 cm of space around the unit for proper ventilation.
- Initial Cleaning: Before first use, clean the interior of the ice maker. Refer to the 'Maintenance and Cleaning' section for detailed instructions.
- Power Connection: Plug the power cord into a grounded electrical outlet.
5. Operating Instructions
- Fill Water Tank: Open the lid and fill the water tank with potable water up to the 'MAX' fill line. Do not overfill. The tank has a capacity of 2.2 liters.
- Power On: Press the 'ON/OFF' button to start the ice maker. The power indicator light will illuminate.
- Select Ice Size: Press the 'S/L' button to choose your desired ice cube size (Small or Large). The corresponding indicator light will illuminate.
- Ice Production: The ice maker will begin its first cycle. Ice cubes will start to form and drop into the ice basket within 10-15 minutes. Each cycle produces 9 ice cubes.
- Ice Full / Add Water: The 'ICE FULL' indicator will light up when the ice basket is full, and the unit will pause production. The 'ADD WATER' indicator will light up when the water level is low, and the unit will pause production until refilled.
- Serving Ice: Use the provided ice scoop to remove ice from the basket.
- Power Off: To stop ice production, press the 'ON/OFF' button.
Figure 5.1: The ice maker in operation, demonstrating its ability to produce ice cubes for beverages.
6. Maintenance and Cleaning
6.1 Self-Cleaning Function
The ice maker features an automatic self-cleaning program:
- Ensure the ice maker is empty of ice and water.
- Fill the water tank with a 1:1 mixture of water and vinegar.
- With the unit in standby mode (plugged in but not making ice), press and hold the 'ON/OFF' button for 5 seconds.
- The cleaning program will start automatically after an audible beep.
- Once the self-cleaning cycle is complete, the unit will automatically enter standby mode. Drain the cleaning solution and rinse the tank thoroughly with fresh water.
Figure 6.1: Illustrates the process of adding water for the self-cleaning program, highlighting the importance of regular maintenance.
6.2 Regular Cleaning
- Exterior: Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners.
- Interior: Regularly drain any remaining water from the tank using the drain plug. Wipe the interior surfaces with a clean cloth.
- Ice Basket: Wash the ice basket and scoop with warm, soapy water, then rinse and dry thoroughly.
- For optimal performance and hygiene, perform a full cleaning cycle at least once a month or more frequently depending on usage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker does not turn on. | No power supply. | Check if the power cord is securely plugged into a working outlet. |
| 'ADD WATER' indicator is on. | Water tank is empty or low. | Refill the water tank with potable water. |
| 'ICE FULL' indicator is on. | Ice basket is full. | Remove ice from the basket. |
| Ice cubes are too small or clumpy. | Water temperature is too high or ambient temperature is too warm. | Use colder water. Ensure the unit is in a cool, well-ventilated area. Select 'Large' ice size. |
| Unusual noise during operation. | Normal operation sounds (compressor, water pump) or unit not level. | Ensure the unit is on a level surface. If noise is excessive or unusual, contact support. |
8. Specifications
Figure 8.1: Dimensions of the Arebos Ice Maker AR-HE-EM22B.
| Feature | Specification |
|---|---|
| Model Number | AR-HE-EM22B |
| Dimensions (L x W x H) | 25P x 33l x 36H cm (Product) / 39.3 x 28.4 x 37 cm (Packaged) |
| Weight | 9.5 kg |
| Water Tank Capacity | 2.2 Liters |
| Ice Production Capacity | Up to 12 kg / 24 hours |
| Ice Production Time | 10-15 minutes per cycle (9 cubes) |
| Power | 120 Watts |
| Voltage | 12 Volts |
| Refrigerant | R600a |
| Material | Plastic |
| Country of Origin | China |
9. Warranty and Support
The manufacturer provides a 2-year availability for spare parts within the EU. For any issues, questions, or to obtain spare parts, please contact the retailer or the manufacturer's customer support directly. Please have your model number (AR-HE-EM22B) and proof of purchase ready when contacting support.