Introduction
Thank you for purchasing the TANLANIN TE-2026 Vintage 3-Speed Bluetooth Portable USB Suitcase Record Player. This manual provides essential information for the safe and efficient operation of your new record player. Please read it thoroughly before use and retain it for future reference.
Figure 1: TANLANIN TE-2026 Record Player (Emerald Green)
Safety Instructions
- Read all instructions carefully before operating the unit.
- Keep the manual for future reference.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Package Contents
Ensure all items are present upon unboxing:
- 1 x Suitcase Record Player
- 1 x Power Cord
- 1 x Turntable Mat
- 1 x Spare Needle
- 1 x User's Manual
Product Overview
Familiarize yourself with the main components and controls of your record player.
Figure 2: Key Features Overview
Control Panel and Connections
Figure 3: Control Panel Detail
- Turntable Platter: Where the vinyl record rests.
- Tone Arm: Holds the stylus (needle).
- Stylus (Needle): Reads the grooves on the record.
- Speed Selector: Switch between 33 1/3, 45, and 78 RPM.
- Power ON/OFF & Volume Knob: Turns the unit on/off and adjusts speaker volume.
- Headphone Jack: For private listening with headphones.
- USB Port: For USB playback and recording.
- TF Card Slot: For TF card playback and recording.
- Function Buttons: Play/Pause, Skip tracks, Mode selection (Bluetooth, USB, TF, AUX).
- AUX Input: Connect external audio devices.
- RCA Output: Connect to external speakers for enhanced sound.
Setup
- Unpack the Unit: Carefully remove the record player from its packaging.
- Power Connection: Connect the power cord to the DC 5V input on the back of the unit, then plug it into a standard wall outlet.
Video 1: TANLANIN Record Player Overview and Setup. This video demonstrates the physical setup and basic features of the record player.
- Remove Stylus Protector: Gently remove the white plastic stylus protector from the needle.
- Place Turntable Mat: Place the provided turntable mat on the platter.
- Position the Tone Arm: Unlock the tone arm from its rest.
Operating Instructions
1. Playing Vinyl Records
- Power On: Turn the Power ON/OFF & Volume knob clockwise to turn on the unit.
- Select Speed: Set the speed selector to the appropriate RPM (33 1/3, 45, or 78) for your record.
- Place Record: Carefully place your vinyl record on the turntable platter.
- Position Stylus: Gently lift the tone arm and move it over the desired track on the record. Lower the tone arm slowly onto the record. The music will begin to play.
Figure 4: Stylus on Vinyl Record
- Adjust Volume: Use the Power ON/OFF & Volume knob to adjust the sound level.
- Auto-Stop Feature: The turntable will automatically stop spinning at the end of a record.
- Finish Playing: When finished, gently lift the tone arm and return it to its rest, then turn off the unit.
2. Bluetooth Playback
- Switch to Bluetooth Mode: Press the 'M' (Mode) button on the control panel until "BT" appears on the display. The unit will emit a pairing sound.
- Pair Device: On your Bluetooth-enabled device (smartphone, tablet, etc.), search for "TANLANIN" in the Bluetooth settings and select it to pair.
- Play Music: Once paired, you can play music from your device through the record player's speakers. Adjust volume using both your device and the record player's volume knob.
Figure 5: Bluetooth Connectivity
3. USB/TF Card Playback & Recording
- Insert USB/TF Card: Insert a USB drive or TF card into the respective slot. The unit will automatically switch to USB/TF mode.
- Playback: Use the function buttons (Play/Pause, Skip) to control music playback from your USB/TF card.
- Recording Vinyl to USB/TF:
- Ensure a USB drive or TF card is inserted.
- Start playing your vinyl record.
- Long press the 'REC' button (often combined with Play/Pause) to start recording. The display will show "REC".
- Long press the 'REC' button again to stop recording. The recorded file will be saved to the USB/TF card.
Figure 6: Vinyl to MP3/WAV Encoding via USB
4. AUX Input
Connect external audio devices (e.g., MP3 player, CD player) to the AUX input jack using a 3.5mm audio cable. Press the 'M' (Mode) button until "AUX" appears on the display. Audio from the external device will play through the record player's speakers.
Figure 7: Expanded Connections (AUX, Headphone, RCA)
5. Headphone Output
For private listening, plug your headphones into the 3.5mm headphone jack. The built-in speakers will automatically mute.
Figure 8: Headphone Jack for Private Listening
Maintenance
- Cleaning the Unit: Use a soft, dry cloth to wipe the exterior of the record player. Avoid abrasive cleaners or solvents.
- Stylus Care: Handle the stylus with extreme care. Only touch the stylus guard. Clean the stylus periodically with a soft brush, brushing from back to front.
- Record Care: Keep your records clean and free of dust. Store them vertically in their sleeves to prevent warping.
- Storage: When not in use, ensure the tone arm is secured with its clip and the lid is closed to protect the components from dust.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power outlet not active. | Ensure power cord is securely connected. Check power outlet with another device. |
| No sound from speakers | Volume too low; Headphones connected; Incorrect mode selected. | Increase volume. Disconnect headphones. Press 'M' to select correct mode (Phono, BT, AUX, USB/TF). |
| Turntable not spinning | Power off; Tone arm not lifted. | Turn on power. Lift tone arm from its rest. |
| Skipping or distorted sound | Dirty or damaged record; Worn or dirty stylus; Unit not on a stable surface. | Clean record. Check stylus for wear/dirt and clean if necessary. Place unit on a flat, stable surface. |
| Bluetooth not connecting | Not in Bluetooth mode; Device too far; Device already connected to another unit. | Switch to Bluetooth mode ("BT" on display). Ensure device is within range. Disconnect from other Bluetooth devices. |
Specifications
- Model Name: TE-2026
- Brand: TANLANIN
- Product Dimensions: 15 x 10 x 5 inches
- Item Weight: 5.55 pounds
- Speeds: 33 1/3, 45, 78 RPM
- Connectivity: Bluetooth, USB, TF Card, AUX-in, RCA Out, Headphone Jack
- Special Features: Digital Display, TF card Recording and Playback, USB Recording and Playback, Built-in Stereo Speakers
- Material: Plastic (with PU leather finish)
- Color: Emerald Green
Warranty and Support
For warranty information or technical support, please refer to the warranty card included in your package or contact TANLANIN customer service directly. Keep your purchase receipt as proof of purchase.
