1. Introduction
This manual provides detailed instructions for the proper use, care, and maintenance of your OUPINKE Model 3255 Automatic Mechanical Wrist Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
2. Product Overview
The OUPINKE Model 3255 is an automatic mechanical wrist watch featuring a sophisticated design and precise movement. It incorporates a diamond-set bezel, a luminous dial, and a multi-functional calendar display.
2.1 Key Features
- Automatic Mechanical Movement: Self-winding mechanism with manual winding support.
- Sapphire Crystal: Scratch-resistant and durable watch face.
- Water Resistance: Rated for 50 meters (5 ATM), suitable for washing hands, cold showers, and shallow swimming. Not suitable for hot baths or diving.
- Luminous Display: Hands and markers feature luminous coating for visibility in low light conditions.
- Multi-functional Dial: Displays date, day of the week, and 24-hour time.
- Tungsten Steel Strap: Durable and resistant to fading.
2.2 Components
Familiarize yourself with the main components of your watch:
Image 2.2.1: Front view of the OUPINKE Model 3255 watch, showcasing the blue dial, diamond bezel, and two-tone bracelet.
- Crown: Used for setting time and date, and manual winding.
- Pushers: Buttons located on the side of the case, used for adjusting specific dial functions (e.g., day, date).
- Dial: The watch face displaying time, date, and other indicators.
- Hands: Hour, minute, and second hands.
- Case: The main body of the watch, protecting the movement.
- Case Back: The rear cover of the watch, often transparent to display the movement.
- Strap/Bracelet: Secures the watch to the wrist.
Image 2.2.2: A detailed view of the watch's automatic mechanical movement, visible through the transparent case back.
Image 2.2.3: The watch dial illuminated in darkness, demonstrating the luminous hands and markers for night visibility.
3. Setup
3.1 Initial Winding
As an automatic mechanical watch, it is powered by the motion of your wrist. However, for initial use or after a period of inactivity, manual winding is recommended to ensure sufficient power reserve.
- Ensure the crown is in position 1 (fully pushed in).
- Rotate the crown clockwise approximately 30-40 times. This will provide enough power for the watch to start ticking and build up its power reserve through normal wear.
3.2 Setting Time and Date
To set the time and date:
- Setting Time: Pull the crown out to position 3 (farthest out). Rotate the crown to move the hands clockwise until the correct time is displayed. Push the crown back to position 1.
- Setting Date and Day: Pull the crown out to position 2 (middle position). Rotate the crown clockwise or counter-clockwise to adjust the date and day indicators. Avoid adjusting the date or day between 9 PM and 3 AM, as this can damage the movement. Push the crown back to position 1.
3.3 Strap Adjustment
The watch comes with a strap adjustment tool. To adjust the length of the tungsten steel bracelet:
Image 3.3.1: The OUPINKE watch presented with its gift box, user manual, and the included strap adjustment tool.
- Identify the pins on the underside of the bracelet links.
- Use the provided tool to push out the pins in the direction of the arrows (if present) on the inner side of the links.
- Remove the desired number of links to achieve a comfortable fit.
- Reinsert the pins to secure the bracelet. Ensure the hidden butterfly buckle closes securely.
4. Operating Instructions
4.1 Automatic Winding
Your OUPINKE watch is equipped with an automatic movement. It winds itself through the natural motion of your arm. When worn daily for at least 8-10 hours, it should maintain sufficient power. If the watch is not worn for an extended period, it may stop and require manual winding as described in Section 3.1.
4.2 Water Resistance
The watch is water-resistant up to 50 meters (5 ATM).
Image 4.2.1: The OUPINKE watch partially submerged in water, illustrating its water resistance feature.
- Suitable for: Daily use, hand washing, cold showers, shallow swimming.
- Not suitable for: Hot baths, hot showers, sauna, diving, or any activity involving high-pressure water or prolonged submersion.
- Always ensure the crown is fully pushed in before exposing the watch to water.
4.3 Luminous Display
The watch hands and markers are coated with a luminous material that absorbs light during the day and emits a glow in low-light conditions, allowing for clear time reading at night.
Video 4.3.1: An official video from OUPINKE demonstrating the features and design of the automatic watch, including its luminous display and overall aesthetic.
5. Maintenance
5.1 Cleaning
Regular cleaning helps maintain the appearance of your watch:
- Wipe the watch case and bracelet with a soft, dry cloth.
- For stubborn dirt, use a slightly damp cloth and mild soap, then wipe dry immediately.
- Avoid using harsh chemicals, solvents, or abrasive cleaners.
5.2 Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. The original watch box is ideal for storage.
Image 5.2.1: The OUPINKE watch presented in its gift packaging, which also serves as a suitable storage box.
5.3 Avoiding Magnetic Fields
Mechanical watches can be affected by strong magnetic fields, which may cause them to run inaccurately. Keep your watch away from strong magnets, such as those found in speakers, refrigerators, and certain electronic devices.
5.4 Regular Servicing
Like any precision instrument, your mechanical watch benefits from periodic professional servicing. It is recommended to have your watch inspected by a qualified watchmaker every 3-5 years to ensure its continued accuracy and water resistance.
6. Troubleshooting
If you encounter any issues with your OUPINKE watch, please refer to the following common problems and solutions:
- Watch Stops Running:
- Cause: Insufficient power reserve.
- Solution: Manually wind the watch by rotating the crown 30-40 times clockwise (crown in position 1). Wear the watch regularly to allow the automatic movement to build up power.
- Time is Inaccurate:
- Cause: Exposure to magnetic fields, low power reserve, or need for adjustment.
- Solution: Ensure the watch is fully wound. Keep it away from strong magnetic sources. If inaccuracy persists, professional servicing may be required.
- Date/Day Not Changing:
- Cause: Incorrect setting, or adjustment during the restricted period (9 PM - 3 AM).
- Solution: Adjust the date/day using the crown in position 2, ensuring it is outside the restricted time window. If the issue continues, consult customer support.
- Condensation Under Crystal:
- Cause: Water ingress due to improper sealing or exposure to extreme temperature changes.
- Solution: This indicates a potential breach in water resistance. Stop using the watch immediately and seek professional repair to prevent further damage.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | TJ-P-G3255GJ-ZL |
| Movement Type | Automatic Mechanical |
| Case Material | Not specified (typically stainless steel with plating) |
| Strap Material | Tungsten Steel |
| Crystal Material | Sapphire Crystal |
| Water Resistance | 50 Meters (5 ATM) |
| Package Dimensions | 5.71 x 4.92 x 2.95 inches |
| Item Weight | 15.87 ounces |
8. Warranty and Support
8.1 Warranty Information
OUPINKE watches are manufactured with attention to quality and precision. For specific warranty details regarding your purchase, please refer to the warranty card included with your product or contact OUPINKE customer service directly. Generally, the warranty covers manufacturing defects under normal use.
8.2 Customer Support
If you have any questions, require assistance with your watch, or need to report an issue, please contact OUPINKE customer support. Contact details can typically be found on the official OUPINKE website or through the retailer where the watch was purchased.
