Aceshop Digital Projection Alarm Clock User Manual

1. Introduction

Thank you for choosing the Aceshop Digital Projection Alarm Clock. This device combines a large LED display with a 180° rotatable projection feature, a USB charging port, and multiple alarm functions, making it an ideal bedside companion. This manual provides detailed instructions to help you set up, operate, and maintain your alarm clock for optimal performance.

2. Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Use only the provided USB cable for power. Ensure the power adapter (not included) meets the required specifications.
• Keep out of reach of children.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

3. Package Contents

Please check the package for the following items:

• Aceshop Digital Projection Alarm Clock
• USB Power Cable (approx. 140 cm)
• CR2032 Button Battery (pre-installed for backup)
• User Manual (this document)

4. Product Overview

Familiarize yourself with the various components of your alarm clock:

Diagram of the Aceshop Digital Projection Alarm Clock showing the time display, rotatable projection, USB charging port, and control buttons (MODE, ALARM, IMG, SWAP, UP, DOWN).

• Large LED Display: Shows time, temperature, and alarm status.
• Projection Lens: Projects time onto a wall or ceiling.
• Control Buttons (Top): MODE, ALARM, IMG, SWAP, UP, DOWN for various settings.
• USB Charging Port (Side): For charging external devices.
• Brightness Sensor (Top): For adaptive display brightness.

5. Setup

5.1 Power Connection

Connect the provided USB power cable to the DC input port on the back of the alarm clock. Plug the other end of the USB cable into a USB power adapter (not included), a computer USB port, or a power bank. The display will light up.

The Aceshop Digital Projection Alarm Clock connected to a wall adapter via its USB cable, illustrating the power connection.

5.2 Battery Backup

The pre-installed CR2032 button battery serves as a backup. It maintains time and alarm settings during a power outage, but it does not power the display or projection. Ensure it is properly seated in its compartment on the back of the unit.

6. Operating Instructions

6.1 Setting Time and 12/24-Hour Format

1. Press and hold the MODE button to enter time setting mode. The hour digits will flash.
2. Use the UP or DOWN buttons to adjust the hour.
3. Press MODE again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP or DOWN buttons to adjust the minute.
5. Press MODE again to confirm the minute and move to 12/24-hour format setting.
6. Use the UP or DOWN buttons to select between 12-hour (with PM indicator) or 24-hour format.
7. Press MODE to exit time setting.

6.2 Setting Alarms (AL1 and AL2)

The clock supports two independent alarms.

1. Press the ALARM button once to view AL1. Press it again to view AL2.
2. While viewing the desired alarm (AL1 or AL2), press and hold the ALARM button. The hour digits will flash.
3. Use the UP or DOWN buttons to adjust the alarm hour.
4. Press ALARM again to confirm the hour and move to minute setting. The minute digits will flash.
5. Use the UP or DOWN buttons to adjust the alarm minute.
6. Press ALARM again to select the alarm sound: Buzzer or FM Radio (if radio function is available and set up).
7. Press ALARM to exit alarm setting.
8. To activate/deactivate an alarm, short press the ALARM button until the corresponding alarm icon (AL1 or AL2) appears/disappears on the display.

6.3 Snooze Function

When the alarm sounds, press the ALARM button (or the large button on top, if applicable) to activate snooze. The alarm will pause and sound again after the preset snooze duration (default 5 minutes, adjustable up to 60 minutes).

A person reaching to press the snooze button on the Aceshop Digital Projection Alarm Clock, illustrating the snooze function.

6.4 Projection Feature

The alarm clock can project the time onto a wall or ceiling. The projection arm is rotatable 180° for optimal viewing.

The Aceshop Digital Projection Alarm Clock projecting the time onto a wall, demonstrating its 180° rotatable projection feature.

• To activate/deactivate projection, press the IMG button.
• Rotate the projection arm to adjust the projection angle.
• Use the focus ring on the projection lens to adjust the clarity of the projected time.
• Press the SWAP button to flip the projected image 180° if it appears upside down.

6.5 Display Brightness Adjustment

The display offers multiple brightness settings:

• Manual Adjustment: Short press the UP button to cycle through 3 brightness levels (High, Medium, Low) and OFF.
• Adaptive Brightness: The clock can automatically adjust brightness based on ambient light. Refer to the manual for specific activation steps if available.
• Night Mode: Set a specific time range (e.g., 18:00 to 06:00) during which the display automatically dims to its lowest setting.

6.6 Temperature Display

The clock displays the indoor temperature. Short press the DOWN button to switch between Celsius (°C) and Fahrenheit (°F).

6.7 USB Charging Port

The USB-A port on the side of the clock can be used to charge your smartphone or other small electronic devices. Connect your device's charging cable to this port. Charging speed may vary depending on the power adapter used for the alarm clock.

7. Maintenance

• To clean the alarm clock, gently wipe the surface with a soft, dry cloth.
• For stubborn marks, slightly dampen the cloth with water or a mild, non-abrasive cleaner.
• Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish.
• Keep the projection lens clean for clear time projection.

8. Troubleshooting

9. Specifications

10. Warranty and Support

Aceshop products are designed for reliability and performance. If you encounter any issues not covered in this manual or require further assistance, please contact Aceshop customer support through your original point of purchase. Please retain your proof of purchase for warranty claims.