MOES B08S2R6V6W
MOES Touch Wall Single Live Wire Smart Switch User Manual
Model: B08S2R6V6W
Brand: MOES
1. Introduction
This manual provides detailed instructions for the installation, setup, operation, and troubleshooting of your MOES Touch Wall Single Live Wire Smart Switch. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Image: MOES Touch Wall Single Live Wire Smart Switch and its retail packaging.
2. Important Safety Information
WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Always turn off power at the circuit breaker before installing or servicing the switch.
- This switch is designed for single pole circuits only. It is not compatible with 3-way switches.
- The wattage of the connected lamp must be greater than 5W for proper operation.
- Only supports 2.4 GHz Wi-Fi networks. 5 GHz networks are not supported.
- Install the included capacitor to ensure proper functionality, especially in no-neutral wire setups.
- Do not install in damp environments.
- Do not exceed the maximum load specified in the product specifications.
- Use English letters and numbers when naming your Wi-Fi router to ensure the Smart Device recognizes it.
Image: Key attention points for installation and compatibility.
3. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 4.72 x 2.91 x 1.5 inches; 7.83 ounces |
| Operation Mode | ON-OFF |
| Current Rating | 2.5 Amps |
| Operating Voltage | 110 Volts |
| Contact Type | Normally Open |
| Connector Type | Screw Terminal |
| Circuit Type | 1-way |
| Actuator Type | Touch |
4. Installation Guide
4.1 Tools Used
The following tools are typically used for installation:
- Wire stripper
- Electrical tape
- Wiring terminal
- Electric pen (voltage tester)
Image: Essential tools for smart switch installation.
4.2 Installation Steps
- Turn off Power: Locate your circuit breaker panel and turn off the circuit breaker controlling the light switch you intend to replace. Verify power is off using an electric pen or voltage tester.
- Remove Old Switch: Carefully remove the faceplate and mounting screws of the existing switch. Gently pull the old switch out from the wall box.
- Identify Wires: Identify the Live wire (L) and the Lamp wire(s) (L1, L2, L3) connected to your existing switch. This switch does not require a Neutral wire at the switch box.
- Connect New Switch: Connect the Live wire to the 'L' terminal on the MOES Smart Switch. Connect the Lamp wire(s) to the corresponding 'L1', 'L2', 'L3' terminals. Ensure all connections are secure.
- Install Capacitor: The capacitor must be wired to the L1 position (lamp wire 1) at the light fixture. Connect one end of the capacitor to the neutral wire of the lamp and the other end to the lamp wire connected to L1. This is crucial for stable operation in no-neutral wire systems. If the lighting bulb still flickers, check the load power of the bulb or consider if another capacitor is required for wiring together.
- Mount Switch: Carefully push the wired smart switch back into the wall box. Secure it with the provided screws. Attach the new faceplate.
- Restore Power: Turn the circuit breaker back on.
Image: Detailed wiring diagram for the smart switch, including capacitor installation.
Image: Examples of horizontal and vertical installation to suit different styles.
4.3 Installation Video Guide
Video: A comprehensive guide to installing the single live wire smart switch.
5. Setup and Pairing
5.1 App Installation
Download the 'Smart Life' or 'Tuya Smart' app from your mobile device's app store (Google Play Store for Android, Apple App Store for iOS).
5.2 Wi-Fi Pairing
Open the app and follow the on-screen instructions to add a new device. Ensure your phone is connected to a 2.4 GHz Wi-Fi network. The switch will enter pairing mode when powered on for the first time or after a reset.
5.3 Resetting Wi-Fi Code
To reset the Wi-Fi code and enter pairing mode:
- Press the switch button for 6 times.
- Hold on the 6th time.
- Release until you hear
Related Documents - B08S2R6V6W
MOES WS-SR-US-L Smart Switch Wi-Fi Single Pole Installation and User Manual
Comprehensive user manual for the MOES WS-SR-US-L Wi-Fi Smart Switch. Includes installation instructions, setup guide, safety information, app integration with Alexa and Google Assistant, and troubleshooting tips.
MOES WS-B-US-L WiFi Smart Switch: Instruction Manual
This instruction manual details the installation, setup, and features of the MOES WS-B-US-L WiFi Smart Switch. Learn how to integrate it with your smart home system, including compatibility with Amazon Alexa, Google Assistant, and the Tuya platform, offering flexible wiring options for seamless control.
MOES Smart Switch Instruction Manual - WiFi and RF Control
Comprehensive instruction manual for the MOES Smart Switch (WS-EU-RF / WS-US-RF) covering installation, setup with Smart Life app, RF pairing, and Alexa integration. Learn how to control your lights wirelessly.
MOES Smart Switch Installation and User Manual
Comprehensive guide for installing and using the MOES WS-EU-RF / WS-US-RF WiFi + RF433 Smart Touch Wall Switch with Alexa and Google Home integration. Includes setup, wiring, and troubleshooting.
Moes MS-104 Wi-Fi+RF Switch Module: Instruction Manual and Setup Guide
Comprehensive guide to installing, configuring, and using the Moes MS-104 Wi-Fi+RF Switch Module for smart home automation, including wiring diagrams, FAQs, and app integration.
MOES Smart Switch Wi-Fi RF433 Glass Panel Installation and User Manual
Comprehensive guide for MOES Wi-Fi + RF433MHz smart glass panel touch switch. Covers installation, wiring, Smart Life/Tuya app setup, multi-control association, voice control with Alexa and Google Home, safety, and warranty.