Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your JUYEER Universal Desk Mount. This mount is designed to enhance your flight simulation experience by securely holding joysticks, throttles, and other HOTAS (Hands On Throttle And Stick) systems. It is compatible with a wide range of flight peripherals from various brands.
Safety Information
- Ensure all screws and fasteners are tightened securely before use to prevent accidental detachment of your equipment.
- Do not exceed the maximum weight limit of 386 kg (850 lbs) for the mount.
- Avoid placing the mount in unstable positions or on surfaces that cannot support its weight and the attached peripherals.
- Keep small parts and tools out of reach of children.
- Exercise caution when adjusting the height or position of the mount to avoid pinching fingers or damaging equipment.
Package Contents
Verify that all components are present before beginning assembly:
- Desk Mount Frame Assembly (2 sets)
- Multi-functional Brackets (2 sets)
- Assorted Screws and Wrenches for installation
- Silicone Pad with 3M backing for desktop protection
- Instruction Manual (this document)
Note: An installation instruction video is referenced in the product description, but no direct link is provided in the product data.
Setup and Installation
Follow these steps to assemble and install your JUYEER Universal Desk Mount:
1. Attaching the Desk Clamp
The desk clamp mechanism is designed for quick attachment and removal without tools. Position the mount on your desk edge and tighten the clamp until it is firm and stable. Ensure the silicone pad is used to protect your desktop surface.
Image: Underside view of the desk mount clamp mechanism attached to a desk, showing the tightening screw and protective pad. This illustrates how the mount secures to the desk.
2. Adjusting Mounting Plate Height
The mounting plate, where your peripheral will attach, can be adjusted vertically. Slide the plate up or down along the main frame to find the optimal height for comfortable use. This helps maintain a natural sitting posture and reduces arm and shoulder fatigue during extended sessions.
3. Attaching Your Peripherals
Use the provided multi-functional brackets and assorted screws to attach your joystick, throttle, or other flight simulation device to the mounting plate. The brackets are designed to accommodate various HOTAS models. If the included screws are not compatible with your specific model, you may need to acquire appropriately sized screws.
- Thrustmaster T.16000M FCS:
- Thrustmaster TCA Officer Pack Airbus Edition:
- Logitech X52/X52 Pro:
- Logitech X56:
- VKB Gladiator NXT EVO (example):
Image: A JUYEER desk mount securely holding a Thrustmaster T.16000M FCS joystick and a Thrustmaster TWCS throttle, demonstrating a typical setup.
Image: A JUYEER desk mount supporting a Thrustmaster TCA Officer Pack Airbus Edition joystick and its corresponding throttle quadrant, showcasing compatibility.
Image: A JUYEER desk mount with a Logitech X52 joystick and throttle attached, illustrating the mount's adaptability for different peripheral types.
Image: A JUYEER desk mount supporting a Logitech X56 joystick and throttle, demonstrating a robust setup for advanced flight simulation.
Image: Two JUYEER desk mounts configured for a dual-stick setup, holding VKB Gladiator NXT EVO joysticks, highlighting the versatility for HOSAS (Hands On Stick And Stick) configurations.
Operating Instructions
Once installed, the JUYEER Desk Mount provides a stable platform for your flight simulation peripherals. The quick-release clamps allow for easy removal and re-attachment if you need to clear your desk space or adjust the position frequently. The height adjustment feature ensures ergonomic comfort during long gaming sessions.
- To adjust height: Loosen the fasteners on the side of the vertical frame, slide the mounting plate to the desired height, and re-tighten securely.
- To remove/reposition: Simply loosen the desk clamp screw until the mount can be lifted off the desk.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your desk mount:
- Cleaning: Wipe down the metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Silicone Pads: Inspect the silicone pads for wear or damage. Replace if necessary to continue protecting your desktop.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount feels unstable or wobbly. | Desk clamp not tightened sufficiently, or fasteners on the mounting plate are loose. | Ensure the desk clamp is fully tightened. Check and tighten all screws connecting the mounting plate to the vertical frame. Verify the desk surface is stable. |
| Peripheral (joystick/throttle) does not fit the mounting plate. | Incorrect bracket usage or incompatible screw size. | Experiment with different multi-functional brackets provided. If the screw holes do not align or the included screws are not suitable, you may need to purchase screws of the correct size and thread for your specific peripheral. |
| Desk surface is getting scratched. | Silicone protective pad is missing or improperly placed. | Ensure the silicone pad is correctly positioned between the clamp and your desk surface. If damaged, replace the pad. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 736961316453 |
| Brand | JUYEER |
| Dimensions (L x W x H) | 36 x 14 x 11 cm (14.17 x 5.51 x 4.33 inches) |
| Item Weight | 5.95 Kilograms (13.12 lbs) |
| Maximum Weight Capacity | 386 Kilograms (850 lbs) |
| Material | Silicone (for protective pads), Metal (for frame) |
| Mounting Type | Tabletop Clamp |
| Special Feature | Rotatable (referring to potential adjustment of attached devices) |
| Compatible Devices | Thrustmaster T-Flight Hotas One/4/X, T.flight Stick X, Sol-R2 HOSAS, Farmstick, TCA Quadrant Boeing Edition, T16000M FCS Flight Pack, TCA Officer Pack Airbus Edition; Winwing Ursa Minor series; Logitech x56, x55, x52, x52 pro, G Extreme 3D pro; Turtle Beach velocityone flightstick and velocityone flightdeck hotas. |
| Country of Origin | China |
Warranty and Support
Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact JUYEER directly through their official channels or the retailer from whom the product was purchased.