1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your BONLICHT Modern 6-Light Brushed Nickel Bathroom Vanity Light Fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
The BONLICHT Modern 6-Light Vanity Light Fixture features a brushed nickel finish and seeded glass shades, designed for indoor use in various rooms including bathrooms, kitchens, and living areas. It is compatible with E26 base bulbs and supports dimming with a compatible dimmer switch and dimmable bulbs.
2. Safety Information
- Always turn off the main power supply at the circuit breaker before installation, maintenance, or bulb replacement.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances.
- Use only E26 base bulbs with a maximum wattage of 60 watts per bulb.
- Do not exceed the specified wattage to prevent overheating and potential fire hazards.
- This fixture is designed for indoor use only. Do not expose to direct water spray or outdoor elements.
- Handle glass shades with care to prevent breakage.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x Light Fixture Body (Brushed Nickel)
- 6 x Seeded Glass Shades
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual
Note: Bulbs are not included and must be purchased separately.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | BONLICHT |
| Model Name | Modern 6-Light Wall Vanity Fixture |
| Color | Brushed Nickel |
| Material | Metal, Glass |
| Style | Transitional, Industrial Farmhouse |
| Light Fixture Form | Wall Mount |
| Number of Light Sources | 6 |
| Bulb Base | E26 |
| Maximum Wattage per Bulb | 60 Watts |
| Voltage | 110 Volts |
| Dimmable | Yes (with compatible dimmer switch and bulbs) |
| Indoor/Outdoor Usage | Indoor Use Only |
| Power Source | Hardwired |
| Item Weight | 14.87 pounds |
| Package Dimensions | 45.3 x 13.3 x 6.4 inches |
Dimensions of the fixture:
Diagram showing the dimensions of the 6-light vanity fixture. The total length is 37.2 inches (945mm). Each glass shade is 5 inches (130mm) high and 3.8 inches (100mm) wide.
5. Installation Instructions
Before installation, ensure the power is OFF at the circuit breaker.
- Prepare the Mounting Surface: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Attach Mounting Plate: Secure the mounting plate to the electrical box using the provided screws.
- Wire Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
- Mount the Fixture: Carefully align the fixture body with the mounting plate and secure it with the provided screws.
- Install Bulbs: Screw E26 base bulbs (max 60W, not included) into each socket.
- Attach Glass Shades: Carefully place each seeded glass shade over the bulb and secure it according to the fixture design (typically by screwing a retaining ring or using clips).
The fixture can be installed with the lights facing upwards or downwards, depending on your preference and desired lighting effect.
Image showing the vanity light fixture installed in two orientations: lights facing up and lights facing down, above a bathroom vanity.
Close-up images of the brushed nickel finish, seeded glass lampshade, and E26 bulb base with a maximum 60W rating.
6. Operating Instructions
Once installed, restore power at the circuit breaker. The light fixture is operated via your wall switch. If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the light intensity as desired.
Image illustrating the dimmable feature of the light fixture, showing different bulb types compatible with E26 base: Dimmable, LED, Incandescent, CFL. A hand icon points to a dimmer switch. Note: Bulb and dimmer are not included.
7. Maintenance
- Cleaning: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Unscrew the old bulb and screw in a new E26 base bulb (max 60W).
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wire connection Faulty bulb | Check circuit breaker and wall switch. Verify all wire connections are secure (power off first). Replace bulb with a known working one. |
| Lights flicker | Loose bulb Incompatible dimmer switch/bulbs Loose wiring | Tighten bulbs. Ensure dimmer and bulbs are compatible and rated for dimming. Check wire connections (power off first). |
| Glass shade is damaged | Accidental impact | Contact BONLICHT customer service for replacement parts. |
9. Warranty and Support
BONLICHT provides a free replacement for any defects. If you have any questions, suggestions, or require support, please contact BONLICHT customer service. Refer to your purchase documentation for specific warranty terms and contact information.