Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Hampton Bay Lighting Clifton 11-inch Brushed Nickel Selectable LED Flush Mount fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
- WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing any accessories.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring.
- This fixture is intended for indoor use only. Do not expose to water or moisture.
- Do not attempt to alter the fixture or its components. Any modifications may void the warranty and create a safety hazard.
- Handle the fixture with care. Avoid dropping or subjecting it to strong impacts.
Package Contents
Verify that all components are present before beginning installation. If any part is missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Clifton 11-inch LED Flush Mount Fixture (1)
- Mounting Hardware (1 set)
Specifications
| Brand | Hampton Bay Lighting |
| Model Name | Clifton |
| Model Number | 28620ac9-1c33-4c15-a2c5-f7ebd2223247 |
| Dimensions (L x W x H) | 11 in. x 11 in. x 11 in. |
| Weight | 3.11 lbs |
| Finish Type | Brushed Nickel |
| Light Source Type | Integrated LED |
| Light Color | Selectable White (via remote) |
| Control Method | Remote Control |
| Installation Type | Flush Mount |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | No |
Setup and Installation
Follow these steps to properly install your flush mount ceiling light. Ensure power is OFF at the circuit breaker before starting.
- Prepare for Installation: Turn off the power to the junction box at the circuit breaker. Remove any existing fixture.
- Attach Mounting Bracket: Secure the mounting bracket (included in hardware) to the junction box using the provided screws. Ensure the bracket is firmly attached and level.
- Make Electrical Connections: Connect the electrical wires from the fixture to the corresponding wires in the junction box.
- Connect the black wire from the fixture to the black (Live) wire from the junction box.
- Connect the white wire from the fixture to the white (Neutral) wire from the junction box.
- Connect the green or bare copper (Ground) wire from the fixture to the green or bare copper (Ground) wire from the junction box.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling and stable.
- Restore Power: Once the fixture is securely installed, turn the power back on at the circuit breaker.
Operating Instructions
This fixture is operated using the included remote control.
- Power On/Off: Press the power button on the remote control to turn the light on or off.
- Adjust Brightness: Use the brightness control buttons (e.g., '+' and '-') on the remote to increase or decrease the light intensity.
- Select Color Temperature: The fixture features selectable LED color temperatures. Use the dedicated buttons (e.g., 'Warm White', 'Cool White', 'Daylight' or specific Kelvin values) on the remote to cycle through or select your desired light color.
- Remote Control Batteries: The remote control typically requires 2 AAA batteries (not included). Refer to the remote control's battery compartment for specific battery type and installation instructions.
Maintenance
Regular maintenance ensures optimal performance and longevity of your fixture.
- Cleaning: Always turn off the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces of the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LED Care: The LED components are integrated and do not require replacement. Do not attempt to disassemble the LED module.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified electrician.
Troubleshooting
If you experience issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Remote control batteries are dead. | Check the circuit breaker and wall switch. Turn off power and check wire connections. Replace remote control batteries. |
| Light flickers or dims unexpectedly. | Loose wire connections. Incompatible dimmer switch (if applicable). | Turn off power and check wire connections. Ensure you are using the remote control for dimming, not a wall dimmer. |
| Remote control is not working. | Dead batteries. Obstruction between remote and fixture. Remote not paired (if required). | Replace batteries in the remote control. Ensure a clear line of sight. Refer to remote control instructions for pairing procedures (if applicable). |
Warranty and Support
Hampton Bay Lighting products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, technical support, or to order replacement parts, please refer to the warranty card included with your purchase or visit the Hampton Bay Lighting official website. Do not return the product to the store without first contacting customer service.