Intelligent Breathing Cupping Massage Instrument User Manual

1. Introduction

This user manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Intelligent Breathing Cupping Massage Instrument. Please read this manual thoroughly before using the device and retain it for future reference.

The Intelligent Breathing Cupping Massage Instrument integrates dynamic breathing cupping, red light hot compress, and one-key pressure relief functions. It intelligently monitors pressure within the tank and adjusts vacuum negative pressure in real-time, offering a versatile massage experience for home and office use.

2. Safety Information

Please adhere to the following safety guidelines to prevent injury or damage to the device:

• Always use on bare skin, avoiding sensitive areas.
• Do not use on broken skin or injuries.
• Keep the device away from heat sources and water.
• Charge the device only with the provided charger.
• Do not leave the device charging unattended.
• Stop use immediately if you experience pain or discomfort.

Legal Disclaimer: Statements regarding this device have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

3. Product Overview and Features

The Intelligent Breathing Cupping Massage Instrument is designed for ease of use and effective massage therapy. Key features include:

• Intelligent Breathing Cupping: Dynamically adjusts vacuum pressure for optimal comfort and effectiveness.
• Red Light Hot Compress: Provides soothing heat therapy.
• One-Key Pressure Relief: Easily release suction with a single button press.
• 6-Gear Charging: Efficient power management.

Figure 3.1: Front view of the Intelligent Breathing Cupping Massage Instrument. This image shows the device's sleek design with a blue base and a black top featuring a digital display.

Figure 3.2: Close-up of the device's LED display and four independent control buttons. The buttons are labeled for Power/Mode, Temperature Control, Suction, and Pause, indicating intuitive operation.

Figure 3.3: The device in use, demonstrating the PI Conduction Heating and 6-Speed Red Light Heating feature. The red light is visible, indicating the hot compress function is active for deep layer penetration.

Figure 3.4: Illustration of the device's Vacuum Negative Pressure capability, highlighting its 6-Speed Negative Pressure for strong and stable suction during cupping therapy.

4. Setup

Before first use, ensure the device is fully charged.

1. Charging the Device:
   

   Figure 4.1: The device connected via USB for charging. It features an 1800mAh Lithium Battery and supports USB charging for convenience.

   Connect the provided USB charging cable to the device's charging port and plug the other end into a compatible USB power adapter (not included) or a computer USB port. The indicator light will show charging status.

2. Initial Preparation: Ensure the skin area where the device will be applied is clean and dry. For optimal suction, a small amount of massage oil or lotion can be applied to the skin.

5. Operating Instructions

Follow these steps to operate your Intelligent Breathing Cupping Massage Instrument:

1. Power On/Off: Press and hold the Power/Mode Button (refer to Figure 3.2) for 2-3 seconds to turn the device on or off. The LED display will illuminate upon power-on.
2. Select Mode: Short press the Power/Mode Button to cycle through available modes (e.g., continuous suction, breathing cupping).
3. Adjust Temperature (Red Light Hot Compress): Press the Temperature Control Button (refer to Figure 3.2) to activate and adjust the red light heating intensity. There are multiple heat levels available.
4. Adjust Suction Intensity: Press the Suction Button (refer to Figure 3.2) to increase or decrease the vacuum negative pressure. The device offers 6 levels of suction intensity.
5. Apply to Skin: Place the device firmly on the desired skin area. Ensure a good seal for effective suction.
6. One-Key Pressure Relief: To release the suction, press the Pause Button (refer to Figure 3.2). This will immediately release the vacuum pressure.
7. Session Duration: Do not use on the same area for extended periods to avoid discomfort.

Figure 5.1: The Intelligent Breathing Cupping Massage Instrument being used on a user's shoulder, demonstrating typical application.

6. Maintenance

Proper maintenance ensures the longevity and hygiene of your device.

• Cleaning: After each use, wipe the suction cup and the device's surface with a soft, damp cloth. For thorough cleaning, use a mild disinfectant. Do not immerse the device in water.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
• Charging: Recharge the device when the battery indicator is low to maintain battery health.

7. Troubleshooting

If you encounter any issues with your device, please refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Generic

For further assistance, please visit the product's listing page on Amazon or contact Amazon customer service.