1. Introduction
This user manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your TEMPO STYLE MSpa Diva Plus F-MO082W Circular Hydromassage Hot Tub. Designed for up to 8 adults, this hot tub features a 1120-liter capacity, 144 air jets with three-speed massage, an integrated water heating system, UVC sterilization, and advanced water filtration. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
Image 1: The TEMPO STYLE MSpa Diva Plus F-MO082W Circular Hydromassage Hot Tub, showcasing its exterior design.
2. Safety Instructions
Always adhere to the following safety guidelines to prevent injury or damage to the hot tub. Failure to follow these instructions may void your warranty.
- Read All Instructions: Before installing and using this product, read and understand all instructions in this manual.
- Electrical Safety: Connect the hot tub only to a grounded power outlet protected by a Residual Current Device (RCD) with a tripping current not exceeding 30mA. Do not use extension cords.
- Water Temperature: The water temperature in the hot tub should not exceed 40°C (104°F). Lower temperatures are recommended for children and individuals with health conditions.
- Children Supervision: Children should always be supervised by an adult when in or near the hot tub.
- Chemicals: Maintain proper water chemistry. Improper use of chemicals can cause health risks and damage the hot tub.
- Medical Conditions: Consult a doctor before use if you have any medical conditions, are pregnant, or have heart disease, high blood pressure, or diabetes.
- Alcohol and Drugs: Do not use the hot tub under the influence of alcohol, drugs, or medication, as this may impair judgment and increase the risk of drowning or hyperthermia.
- Sharp Objects: Keep all sharp objects away from the hot tub to prevent punctures.
- Anti-freeze Function: The hot tub is equipped with an anti-freeze system. However, for prolonged periods of non-use in freezing temperatures, proper winterization procedures are recommended.
3. Package Contents
Verify that all items listed below are present in your package. If any components are missing or damaged, contact TEMPO STYLE customer support immediately.
- MSpa Diva Plus F-MO082W Hot Tub Unit
- Control Unit with Integrated Heater, Air Pump, and Filtration System
- Inflatable Thermal Cover and Air Chamber
- Foam Mat (Ground Mat)
- Filter Cartridges (x2)
- Drain Hose Adapter
- High-Pressure Hand Pump for Inflation
Image 2: Hot tub unit, control unit, and ground mat.
4. Setup
Follow these steps for proper installation of your MSpa Diva Plus hot tub.
- Site Selection: Choose a flat, stable, and level surface capable of supporting the weight of the filled hot tub (approximately 1120 kg + occupants). Ensure adequate drainage and proximity to a grounded power outlet.
- Ground Mat Placement: Unfold the foam mat and place it on your chosen site. This provides insulation and protection for the hot tub base.
- Unpacking and Positioning: Carefully remove the hot tub from its packaging and place it on the ground mat.
- Inflation:
- Connect the high-pressure hand pump to the hot tub's inflation valve.
- Inflate the hot tub walls until they are firm to the touch but not over-inflated. Refer to the maximum pressure indicated on the pump or hot tub.
Image 3: High-pressure hand pump used for inflating the hot tub.
- Control Unit Connection: Connect the control unit to the hot tub according to the markings on the ports. Ensure all connections are secure and watertight.
- Filter Installation: Insert the filter cartridge(s) into the designated filter housing(s) inside the hot tub.
- Filling with Water: Fill the hot tub with fresh water using a garden hose. Fill until the water level is between the minimum and maximum water lines indicated on the interior wall.
Image 4: Interior view of the hot tub, highlighting the minimum and maximum water fill lines.
- Power Connection: Plug the control unit into a grounded electrical outlet. Do not power on until the hot tub is filled to the correct level.
5. Operating Instructions
Your MSpa Diva Plus hot tub features an intuitive control panel and smart functions for an optimal experience.
5.1 Control Panel Overview
The external control panel features an LCD display and touch controls. Refer to the specific icons on your panel for detailed functions.
5.2 Heating Function
- Press the heater button on the control panel to activate the water heating system (1500W).
- Use the temperature adjustment buttons to set your desired water temperature (maximum 40°C / 104°F).
- The heating indicator light will illuminate when the heater is active. Heating time varies based on ambient temperature and initial water temperature.
5.3 Hydromassage Air Jets
- Press the bubble button to activate the 144 air jets.
- The air pump offers three adjustable speeds (L1: 300W, L2: 500W, L3: 720W). Press the bubble button repeatedly to cycle through the speeds.
- The air jets will automatically shut off after 20 minutes of continuous operation to prevent overheating. You can restart them if desired.
Image 5: The MSpa Diva Plus hot tub with hydromassage air jets active.
5.4 Water Filtration
- The filtration system (12V/60W) automatically runs to keep the water clean.
- You can manually activate or deactivate the filtration cycle via the control panel. Regular filtration is crucial for water quality.
5.5 UVC Sterilization
- The integrated UVC sterilizer helps to eliminate bacteria and other microorganisms in the water.
- Activate this function via the control panel as part of your regular water maintenance routine.
5.6 Anti-Freeze System
- The hot tub is equipped with an anti-freeze function that automatically activates the heater if the water temperature drops too low, preventing freezing.
- Ensure the hot tub remains powered during cold weather to allow this system to function.
5.7 Smart Wi-Fi Control
- The Diva Plus model supports Smart Wi-Fi control via the MSpa Link APP.
- Download the MSpa Link APP from your device's app store. Follow the in-app instructions to connect your hot tub for remote control of heating, filtration, and other functions.
6. Maintenance
Regular maintenance is crucial for the longevity and hygiene of your hot tub.
6.1 Water Chemistry
- Regularly test the water pH, alkalinity, and sanitizer levels using a test kit.
- Adjust chemical levels as needed to maintain balanced water. Consult a spa chemical guide for recommended ranges.
- Change the hot tub water every 1-3 months, depending on usage.
6.2 Filter Cartridge Cleaning and Replacement
- Clean the filter cartridge(s) weekly by rinsing them with a garden hose.
- Replace filter cartridges every 1-2 months, or more frequently with heavy use, to ensure efficient filtration.
6.3 Draining and Cleaning the Hot Tub
- To drain, connect the drain hose adapter to the hot tub's drain valve and direct the water to a suitable drainage area.
- Once drained, clean the interior surfaces of the hot tub with a soft cloth and a mild, non-abrasive cleaner specifically designed for hot tubs. Rinse thoroughly.
6.4 Thermal Cover Usage
- Always keep the inflatable thermal cover on the hot tub when not in use. This helps retain heat, reduces energy consumption, and keeps debris out.
- Ensure the cover is securely fastened using the buckles provided.
Image 6: The MSpa Diva Plus hot tub with its thermal cover in place, alongside the control unit.
6.5 Winterization and Storage
- If storing the hot tub for winter, drain all water completely.
- Clean and dry the hot tub thoroughly before deflating.
- Store the hot tub and all accessories in a dry, temperate location, protected from direct sunlight and extreme temperatures.
7. Troubleshooting
This section addresses common issues you might encounter with your hot tub.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hot tub not heating | Power supply issue, heater malfunction, low water level, filter clogged. | Check power connection and RCD. Ensure water level is above minimum. Clean or replace filter. Contact support if issue persists. |
| Air jets not working or weak | Air pump malfunction, air intake blocked, automatic shut-off activated. | Check for blockages around air intake. Restart jets if automatic shut-off occurred. Contact support. |
| Water is cloudy or dirty | Insufficient filtration, unbalanced water chemistry, dirty filter. | Run filtration cycle longer. Test and adjust water chemicals. Clean or replace filter cartridge. |
| Water leaking from hot tub | Puncture in liner, loose connection, drain valve not closed properly. | Inspect liner for damage and repair with patch kit (if included). Tighten all connections. Ensure drain valve is fully closed. |
| Control panel error code | Specific system fault. | Refer to the control unit's specific error code guide (if available in separate documentation) or contact customer support with the error code. |
8. Specifications
Technical details for the TEMPO STYLE MSpa Diva Plus F-MO082W Hot Tub.
| Model Number | F-MO082W |
| Capacity | 8 Adults |
| Water Capacity | 1120 Liters |
| Dimensions (Diameter x Height) | 192 cm x 65 cm |
| Number of Air Jets | 144 |
| Heater Power | 1500 W |
| Air Pump Power | 720 W (3 speeds: L1: 300W, L2: 500W, L3: 720W) |
| Filtration Power | 12V / 60W |
| Material | Rhino-TechTM Premium Reinforced 6-Layer PVC |
| Power Supply | 220-240 V |
| Power Cable Length | 3.5 m |
| Net Weight | 39.5 kg |
| Certifications | CE, ISO9001-2008 |
Image 7: Technical specifications comparison between MSpa Diva and Diva Plus models.
9. Warranty and Support
Your TEMPO STYLE MSpa Diva Plus F-MO082W Hot Tub comes with a warranty for spare parts availability within the EU for 2 years.
- Warranty Period: 2 years for spare parts availability in the EU. Please retain your proof of purchase for warranty claims.
- Customer Support: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact TEMPO STYLE customer service.
- Contact Information: Refer to the contact details provided with your purchase or visit the official TEMPO STYLE website for support.