Kismile 3-in-1 Water Cooler Dispenser User Manual

Product Overview

The Kismile 3-in-1 Water Cooler Dispenser is a versatile appliance designed to provide instant access to hot, cold, and room temperature water, along with a convenient built-in ice maker. Its top-loading design accommodates 3-5 gallon water bottles, making it suitable for various environments such as homes, offices, and dormitories. This unit features an easy-to-operate control panel and a removable drip tray for simple maintenance.

Image: Front view of the Kismile 3-in-1 Water Cooler Dispenser with a water bottle installed.

Image: Features of the Kismile Water Cooler, including top loading for 3-5 gallon bottles, easy control, ETL certification, and low noise operation.

Safety Information

• Always plug the unit into a grounded electrical outlet.
• Do not operate the dispenser if the power cord is damaged.
• Keep the dispenser away from direct sunlight and heat sources.
• Ensure proper ventilation around the unit.
• The hot water function has a child safety lock. Always engage the lock when not in use, especially in households with children.
• Do not immerse the dispenser in water or other liquids.
• Unplug the unit before cleaning or performing any maintenance.

Setup

Follow these steps for initial setup of your water cooler dispenser:

1. Unpack the Unit: Carefully remove the dispenser from its packaging. Retain all packaging materials for future transport or storage.
2. Placement: Place the dispenser on a flat, stable surface. Ensure there is adequate space around the unit for ventilation (at least 4 inches from walls).
3. Water Bottle Installation (Top Loading):
   a. Clean the neck of a 3 or 5-gallon water bottle.
   b. Remove the cap from the water bottle.
   c. Carefully lift the water bottle and invert it, placing its neck into the support collar on top of the dispenser. Ensure it is seated firmly.
   d. The water will begin to flow into the internal reservoirs.
4. Manual Water Filling (for Ice Maker): If you prefer not to use a large water bottle, you can manually fill the internal reservoir for ice making. Open the top lid and pour purified water directly into the designated water box.
   
   

   Image: Illustration of the two methods for adding water: placing a top-loading bottle and manually pouring water into the internal reservoir.
   

   Image: A hand demonstrating the placement of a water bottle onto the top-loading dispenser.

   

   Image: A hand pouring water directly into the top reservoir for manual filling.

5. Power Connection: Once the water bottle is in place and water has filled the internal reservoirs (wait a few minutes), plug the power cord into a grounded electrical outlet. The Power indicator light will illuminate.

Operating Instructions

Your Kismile dispenser offers three water temperatures and an ice-making function. The control panel is intuitive and easy to use.

Image: Detailed view of the control panel, showing indicator lights and buttons for various functions.

Image: Another close-up of the control panel, highlighting the stainless steel finish and button layout.

Water Dispensing

• Hot Water: Press the HOT button. For safety, the hot water button is typically locked. Press the Unlock button first, then press HOT to dispense hot water. The hot water temperature reaches ≥194℉ (90℃).
• Cold Water: Press the COLD button to dispense cold water. The cold water temperature reaches ≤46.4℉ (8℃).
• Room Temperature Water: This unit provides room temperature water directly from the tap without heating or cooling.

Image: Visual representation of the three temperature settings (hot, cold, room) and the ice making capability.

Ice Making

• Ensure the water reservoir is filled. The ice maker will automatically begin producing ice.
• Press the ICE button to dispense ice cubes.
• The unit can produce up to 39 lbs of ice per 24 hours. Ice is typically ready in about 13 minutes per cycle.

Image: A collection of clear, bullet-shaped ice cubes produced by the built-in ice maker.

Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your dispenser.

• Drip Tray Cleaning: The removable drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene. Simply pull the tray out, empty any collected water, wash with mild soap and water, rinse, and dry before reinserting.
  
  

  Image: Features including the removable drip tray for easy cleaning, the durable stainless steel control panel, and the efficient fan for heat dissipation.
  

  Image: A close-up view of the drip tray being removed from the dispenser for cleaning.

• External Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Internal Cleaning/Descaling: Periodically, the internal water tanks should be cleaned to prevent mineral buildup. Unplug the unit, drain all water, and follow the manufacturer's recommended descaling procedure, often involving a vinegar solution. Rinse thoroughly after descaling.
• Fan Maintenance: The fan at the back of the unit helps dissipate heat. Ensure it is not obstructed and keep the area around it clean to maintain efficient cooling and ice production.

Troubleshooting

Specifications

• Brand: Kismile
• Model: B09VGPQZ7H
• Color: Black, Gray
• Material: Stainless Steel
• Capacity: 5 Gallons (water bottle)
• Product Dimensions: 18.5"D x 12.83"W x 20.83"H
• Style: Top Load
• Installation Type: Freestanding
• Number of Settings: 3 (Hot, Cold, Room Temperature)
• Power Source: Corded Electric
• Item Weight: 36.1 pounds
• Ice Production: Up to 39 lbs per 24 hours

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Kismile website. You may also contact Kismile customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.

Kismile Store: Visit the Kismile Store on Amazon