1. Product Overview
The MG PRIME Touch-Up Paint Kit is designed for minor paint repairs on vehicle body parts made of metallic and plastic materials. This kit provides professional-grade base coat and clear coat to restore the original finish of your vehicle.
This image displays the complete MG PRIME touch-up paint kit, featuring two 50ml bottles: one for the professional base coat and one for the professional clear coat. Both bottles are equipped with integrated application brushes for precise use.
Key Features:
- Ideal for small repair jobs on metallic and plastic body parts.
- OEM (Original Equipment Manufacturer) quality lacquer.
- High opacity due to excellent pigment content.
- Fast drying, excellent adhesion, and extremely high color accuracy.
- Professional quality – Made in Germany.
Product Contents:
- One 50ml professional quality base coat bottle for Fiat 196/C Verde Rugiada Metallic / Tau Grün Metallic.
- One 50ml glossy clear coat bottle.
- Each bottle includes an integrated brush in the lid for application.
Vehicle Compatibility:
This paint color (Code 196/C, Verde Rugiada Metallic / Tau Grün Metallic / Dew Metallic) has been used by the factory for the following Fiat vehicles, among others:
- For Fiat 500 (2020 - 2022) (Dew Metallic)
- For Fiat 500 C (2020 - 2024)
- For Fiat 500 E (2023 - 2024)
A detailed view of the base coat bottle, clearly showing the color code label. It specifies 'für Fiat 196/C Verde Rugiada Metallic Tau Grün Metallic', indicating the exact paint code and color names for Fiat vehicles.
2. Preparation
Surface Preparation:
- Ensure the surface to be repaired is completely dry, dust-free, and grease-free.
- If necessary, clean the area thoroughly with a silicone remover to eliminate any contaminants.
- The object's temperature should be between 20°C and 25°C for optimal application and drying.
3. Application Instructions
A close-up of a product label, presenting detailed application instructions in both German and English. This provides users with a quick reference for the correct usage steps directly on the product packaging.
General Application Notes:
- Before each use, shake the bottle vigorously until the mixing ball inside is clearly audible. This ensures proper pigment distribution.
- Always apply paint in a well-ventilated area.
Base Coat Application:
The professional base coat bottle is shown with its cap removed, revealing the integrated brush applicator. This design allows for easy and precise application of the base coat.
- Apply a very thin layer of the base coat directly to the scratch or damaged area.
- Allow the base coat to flash off (evaporate) between each layer. This typically takes a few minutes.
- Repeat application of thin layers until the desired coverage is achieved.
- After applying the final base coat layer, allow it to dry completely for approximately 1 hour. The exact drying time may vary depending on the object and ambient temperature.
Clear Coat Application:
The professional clear coat bottle is depicted with its cap open, showcasing the integrated brush applicator. This brush is designed for smooth and even application of the clear coat over the base coat.
This image focuses on the clear coat bottle, with the label 'Klarlack Transparent glänzend' visible, which translates to 'Clear Coat Transparent Glossy'. This indicates the type of finish provided by the clear coat.
- Once the base coat is completely dry, apply the clear coat in the same manner as the base coat.
- Apply thin, even layers of clear coat over the repaired area.
- Allow the clear coat to flash off between layers.
- After the final clear coat layer, allow it to dry completely. The drying time depends significantly on the object and outside temperature.
Understanding Paint Layers:
This diagram visually explains the typical layering of automotive paint. It shows the vehicle sheet metal at the bottom, followed by the primer filler, then the base coat (Basislack), and finally the clear coat (Klarlack) on top, with approximate thicknesses.
4. Care and Storage
To maintain the quality of the touch-up paint, store the bottles tightly closed in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure they are kept out of reach of children and pets.
5. Troubleshooting
If you encounter issues such as uneven application, poor adhesion, or incorrect color matching, please review the preparation and application steps carefully. Ensure the surface was properly cleaned, the bottles were thoroughly shaken, and thin, even layers were applied with adequate drying time between coats. For persistent issues, consider consulting a professional.
6. Product Specifications
| Specification | Detail |
|---|---|
| Brand | MG PRIME |
| Manufacturer | MG Colors GmbH |
| Model Number | 4066377065413 |
| Item Weight | 150 grams |
| Volume | 100 ml (2 x 50ml bottles) |
| Color | Verde Rugiada Metallic / Tau Grün Metallic (Code 196/C) |
| Finish Type | Glossy |
| Special Features | UV resistant, Weather resistant, Fast drying, Colorfast |
| Specific Uses | Painting and repair |
| Surface Recommendation | Car, motorcycle, metal, plastic |
| Paint Type | Acrylic |
| Country of Origin | Germany |
7. VOC Regulation Compliance
By purchasing this product, you acknowledge and agree to comply with the applicable VOC (Volatile Organic Compounds) regulations, specifically 2004/42/CE or 199/13/CE.
8. Warranty and Support
For information regarding product warranty or customer support, please refer to the seller's policies or contact MG PRIME directly through their official channels. Keep your purchase receipt as proof of purchase.