1. Introduction
This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your VEVOR Industrial Air-Cooled Water Chiller. Please read this manual thoroughly before operating the equipment and retain it for future reference.
Safety Precautions
- Ensure the chiller is installed on a stable, level surface.
- Verify that the power supply matches the chiller's voltage requirements (440V).
- Do not operate the chiller without proper grounding.
- Keep the area around the chiller clear to ensure adequate ventilation.
- Only qualified personnel should perform maintenance or repairs.
2. Product Overview
The VEVOR Industrial Air-Cooled Water Chiller is designed for efficient cooling applications, featuring a 60L capacity, 9.4Hp compressor, finned condenser, and micro-computer control. It is built with a stainless steel water tank for durability and reliable performance.
Image 2.1: Front and side view of the VEVOR Industrial Air-Cooled Water Chiller, showcasing its robust design and control panel.
Key Features
- Fast Cooling: Efficiently delivers 15100 Kcal/h cooling capacity.
- Rapid Heat Dissipation: Equipped with a finned condenser and powerful fans.
- Low Noise Operation: Designed for reduced operational sound.
- Intelligent Microcomputer Program: Provides precise temperature control within 5°C to 30°C.
- Six Security Protections: Includes phase loss, reverse, motor overload, high/low voltage, automatic water replenishment, and coil overheating protection.
Image 2.2: Visual representation of the chiller's core benefits: fast cooling, rapid heat dissipation, and low noise operation.
Image 2.3: Diagram illustrating the six integrated security protection features of the chiller, ensuring stable and safe operation.
Image 2.4: Internal view highlighting key components such as the powerful fan, premium condenser, high-pressure water pump, and the 16-gallon water tank, all contributing to efficient cooling.
3. Setup
3.1 Placement
Place the chiller indoors on a firm, level surface. Ensure there is sufficient clearance (at least 50 cm) around the unit for proper airflow and heat dissipation, especially for the air intake and exhaust vents.
3.2 Electrical Connection
- Confirm that the local power supply matches the chiller's rated input voltage of 440V/60Hz.
- Connect the chiller to a dedicated, grounded power outlet using the provided 5-wire connector.
- Ensure all electrical connections are secure and comply with local electrical codes.
3.3 Water Connections
Connect the water inlet, outlet, and supply lines to your external equipment as required. Ensure all connections are tight to prevent leaks.
Image 3.1: Illustration of the water inlet, outlet, and supply ports, along with the 5-wire electrical connector, simplifying the connection process to external equipment.
3.4 Initial Water Filling
Fill the chiller's stainless steel water tank (16 gallons / 60 liters capacity) with clean, deionized water or a recommended coolant solution. Monitor the water level indicator and ensure it is within the recommended range.
Image 3.2: The chiller features 360-degree self-locking silent wheels for easy movement and secure positioning. Two wheels include locking pedals for added stability.
4. Operation
4.1 Control Panel
The chiller is equipped with a micro-computer control panel for precise temperature management. The panel displays the current temperature, allows for setting adjustments, indicates faults, and shows the operating status.
Image 4.1: Close-up of the multi-functional LED control panel, detailing its capabilities for temperature display, setting adjustments, fault indications, and operating status monitoring.
4.2 Temperature Setting
- Use the control panel to set the desired cooling temperature within the range of 5°C to 30°C.
- Refer to the specific instructions on the control panel for navigating menus and adjusting settings.
Image 4.2: Graphic illustrating the intelligent microcomputer program's precise temperature control, allowing operation within a 5-30°C range.
4.3 Monitoring
The chiller includes dual pressure gauges for comprehensive system monitoring. Regularly check these gauges to diagnose and maintain the system effectively.
Image 4.3: Detailed view of the dual pressure gauges (high and low pressure) for comprehensive system monitoring and diagnosis.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your VEVOR Water Chiller.
5.1 Cleaning the Condenser
Periodically clean the finned condenser to remove dust and debris. A clogged condenser reduces cooling efficiency and increases energy consumption. Use a soft brush or compressed air.
5.2 Water Quality
Regularly check the quality of the water in the tank. Replace or filter the water as needed to prevent scale buildup and corrosion within the system. Use deionized water or a recommended coolant solution.
5.3 General Inspection
- Inspect all hoses and connections for leaks.
- Check electrical wiring for any signs of wear or damage.
- Ensure all fans are operating correctly and without obstruction.
6. Troubleshooting
This section provides guidance for common issues. For complex problems, contact VEVOR customer support.
Common Issues and Solutions
- Chiller Not Cooling: Check power supply, water level, and ensure condenser is clean. Verify temperature settings.
- Error Codes on Display: Refer to the control panel's specific error code manual (if provided separately) or contact support with the displayed code.
- Water Leaks: Inspect all connections and hoses. Tighten or replace as necessary.
- Unusual Noise: Check for loose components, fan obstructions, or abnormal compressor operation.
7. Specifications
Detailed technical specifications for the VEVOR Industrial Air-Cooled Water Chiller.
Image 7.1: Visual representation of the chiller's dimensions and a summary of its key technical specifications.
| Specification | Value |
|---|---|
| Item Model Number | AIR COOLED WATER CHILLER |
| Rated Input Voltage | 440 V/60 Hz |
| Control Temperature | 5°C to 30°C |
| Condensation Temperature | 40°C |
| Operating Ambient Temperature | ≤40°C |
| Compressor Type | Fully Enclosed Scroll |
| Compressor Motor Power | 6 HP/4.5 kW |
| Fan Power | 0.55 kW |
| Pump Power | 0.37 kW |
| Water Tank Capacity | 16 gal / 60 L |
| Refrigeration Capacity | 15100 Kcal/h |
| Net Weight | 430 lbs / 195 kg ± 2% |
| Product Dimensions (L x W x H) | 56.3 x 45.3 x 23.6 inches (1430 x 1150 x 600 mm) |
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact VEVOR customer service. Keep your purchase receipt and product model number handy when contacting support.
Visit the official VEVOR website for the latest support resources and contact details.