Fruhdi RMT Power Recliner Motor Actuator Replacement Manual - Model R812301156333

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Fruhdi RMT Power Recliner Motor Actuator, Model R812301156333. This actuator is designed as a replacement part for compatible power recliners and lift chairs. Please read this manual thoroughly before proceeding with installation or operation to ensure proper function and safety.

Important Safety Information

WARNING: This product involves electrical components. Always exercise caution when handling. Failure to follow these safety instructions may result in injury or damage to the product.

• Always unplug the power cord from the wall outlet before attempting any installation, removal, or maintenance.
• Do not use this product outdoors. It is designed for indoor use only.
• Keep the motor and all electrical components away from heat sources and open flames.
• Do not expose the product to rain or moisture.
• Never attempt to repair or modify the product yourself. Contact qualified personnel for service.
• This product has a maximum weight recommendation of 400 pounds (181 kg). Exceeding this weight limit may cause injury or damage to the product.
• Always ensure the recliner or lift chair is stable and secure before and during use.

Product Overview and Compatibility

The Fruhdi RMT Power Recliner Motor Actuator, Model R812301156333, is a direct replacement for specific recliner and lift chair mechanisms. It is manufactured by RMT.

Compatible Models: This motor can replace R812331156333 and JLDQ.11.156.333D.

Incompatible Models: This motor cannot replace other models such as R8123C2040333, R8123D2040333, R812321156204, R812322039333, R81232039333, R811202500323, R8123K2S40333, JLDQ.11.156.333K, and JLDQ.12.157.333K. Please verify your existing motor's model number before purchase and installation.

Image 1: The Fruhdi RMT Power Recliner Motor Actuator, Model R812301156333, showing the main unit and label.

Image 2: Close-up view of the motor's identification label, displaying model R812301156333 and specifications.

Setup and Installation

Follow these steps to replace your recliner's motor actuator. It is recommended to have a second person assist during the process for safety and ease of installation.

1. Preparation: Unplug the recliner from the power outlet. Position the recliner in a way that allows easy access to the underside of the chair. You may need to carefully tilt it onto its back or side.
2. Identify Connections: Locate the existing motor actuator. Note the power transformer connection (typically 2-pin flat round) and the hand control plug connection (typically 5-pin).
3. Disconnect Old Motor: Carefully disconnect the power transformer cable and the hand control cable from the old motor.
4. Remove Old Motor: The motor is usually attached to the recliner frame with bolts or pins. Remove these fasteners to detach the old motor. Keep track of all hardware.
5. Install New Motor: Position the new Fruhdi RMT motor actuator (Model R812301156333) in the same location as the old one. Secure it to the recliner frame using the original hardware or provided replacement hardware. Ensure it is firmly attached.
6. Connect Cables: Connect the 2-pin flat round power transformer cable to the corresponding port on the new motor. Connect the 5-pin hand control plug to its designated port. Ensure all connections are secure.
7. Test Functionality: Carefully return the recliner to its upright position. Plug the recliner back into the power outlet. Test the hand control to ensure the motor extends and retracts smoothly.

Image 3: The motor actuator showing the 2-pin power transformer connection and the 5-pin hand control plug connection.

Image 4: Detail of the motor's slide block, which facilitates the linear movement for reclining.

Image 5: Illustrative diagram showing the motor's stroke (13.11 inches) and minimum installation dimension (6.14 inches) in context with a recliner.

Operating Instructions

Once the Fruhdi RMT Power Recliner Motor Actuator is correctly installed and connected, operate your recliner using its standard hand control. The motor will extend or retract the mechanism, allowing the chair to recline or return to an upright position.

• Press and hold the appropriate button on your hand control to recline the chair.
• Release the button when the desired recline position is reached.
• Press and hold the opposite button to return the chair to its upright position.
• Ensure no obstructions are in the path of the reclining mechanism during operation.

Maintenance

The Fruhdi RMT Power Recliner Motor Actuator requires minimal maintenance.

• Cleaning: Wipe the exterior of the motor and accessible parts with a clean, dry cloth. Do not use abrasive cleaners or solvents.
• Inspection: Periodically inspect the cables and connections for any signs of wear, fraying, or damage. If damage is found, discontinue use and contact support.
• Lubrication: The internal components of the motor are factory-lubricated and do not require additional lubrication.

Troubleshooting

If your recliner is not functioning correctly after motor replacement, consider the following:

• No Movement:
  • Ensure the recliner is securely plugged into a working power outlet.
  • Verify that all cables (power transformer and hand control) are firmly connected to the motor.
  • Test the power supply and hand control unit. Often, issues stem from these components rather than the motor itself. If possible, test with a known working power supply or hand control.
• Partial Movement or Jamming:
  • Check for any obstructions under or around the recliner mechanism.
  • Ensure the motor is correctly installed and aligned, and that its movement path is clear.
• Incompatibility:
  • Double-check the model number on your old motor against the compatible models listed in this manual. If your old motor's model number differs significantly (e.g., R8123C2040333, R8123K2S40333), this replacement motor is not compatible.
  • Verify the stroke length and minimum installation dimension. If your measurement error exceeds 3mm from the specified 333mm stroke and 156mm minimum install dimension, the motor may not fit or function correctly.

If troubleshooting steps do not resolve the issue, contact the manufacturer or a qualified technician for assistance.

Specifications

Warranty and Support

For warranty information or technical support regarding your Fruhdi RMT Power Recliner Motor Actuator, please refer to the documentation provided with your original purchase or contact Fruhdi customer service directly. Keep your purchase receipt as proof of purchase.