NEBO OMNI 3K Rechargeable Work Light

1. Introduction

The NEBO OMNI 3K is a versatile, omnidirectional LED work light designed for various tasks. It combines powerful illumination with practical features, making it suitable for workshops, construction sites, DIY projects, and outdoor use. This manual provides detailed instructions for its setup, operation, and maintenance.

Image 1: The NEBO OMNI 3K Rechargeable Work Light in its compact form.

2. Setup and Charging

2.1 Initial Charge

Before first use, fully charge the OMNI 3K. The device includes a built-in 4000mAh (3.7V) rechargeable lithium-ion polymer battery. Use the provided USB-C charging cable to connect the device to a power source.

Image 2: The NEBO OMNI 3K connected for USB-C charging.

2.2 Battery Indicator

The 4-blue LED indicator lights show the charging status and battery level. When the unit is turned on, the LEDs function as a battery status monitor. Each LED represents roughly 25% battery life. When only one LED is lit, the unit should be recharged. The highest LED will flash to indicate charging is taking place.

3. Operating Instructions

3.1 Light Modes

The OMNI 3K features 6 light modes, including white COB and red COB options. Press the power button to cycle through the modes:

• Dual COB High: 3000 lumens, 1 hour run time, 70m beam distance. (Press power button 1x from OFF)
• Dual COB Low: 300 lumens, 4 hours run time, 22m beam distance. (Press power button 2x from OFF)
• Single COB High: 1500 lumens, 2 hours run time, 50m beam distance. (Press power button 3x from OFF)
• Single COB Low: 150 lumens, 8 hours run time, 18m beam distance. (Press power button 4x from OFF)
• Red COB: 20 lumens, 11 hours run time, 8m beam distance. (Press and hold power button for 2 seconds from OFF)
• Red COB Flashing: 20 lumens, 20 hours run time, 8m beam distance. (From Red COB mode, press power button once more)

Image 3: The NEBO OMNI 3K operating in red light mode.

3.2 Dimming Instructions

While the light is ON in dual, primary, or secondary COB mode:

1. Press and hold the "-" button to dim. The light will blink 1x when it reaches minimum brightness.
2. Press and hold the "+" button to increase brightness. The light will blink 1x when it reaches maximum brightness.
3. Release the "-" or "+" button at any time to set desired brightness. (Note: If the button is still pressed, light will continue to adjust between minimum or maximum brightness.)

3.3 Memory Power Setting

After adjusting a light mode, leaving that mode on for 8 seconds and pressing the power button will set that mode to memory. From the OFF position, pressing the power button will activate your saved memory power setting. Note: After leaving either mode (dual, primary or secondary COB) ON for 8 seconds or longer, the next press of the button will turn the light OFF.

3.4 Power Bank Functionality

The OMNI 3K features a built-in power bank. Lift the protective flap on the back of the unit to reveal the USB-A output port. Connect your device using a compatible USB cable to charge it.

4. Key Features

4.1 Magnetic Handles

The OMNI 3K is equipped with rotating magnetic handles, offering versatile hands-free operation. These strong magnets allow the light to be securely attached to metal surfaces, such as under a car hood or on a metal cabinet.

Image 4: The NEBO OMNI 3K utilizing its magnetic handles for hands-free lighting.

4.2 Adjustable Panels

The dual COB panels can rotate 360 degrees, allowing you to direct light precisely where needed. This multi-directional capability enhances its utility in various work environments.

4.3 Water Resistance

The OMNI 3K is IPX4 water resistant, meaning it is protected against splashing water from any direction. This feature makes it suitable for use in damp conditions or light rain.

Image 5: The NEBO OMNI 3K demonstrating its IPX4 water resistance.

4.4 Tripod Mount

A 1/4-20 tripod mount is integrated into the design, providing additional mounting options for stable, elevated lighting.

5. Maintenance

To ensure the longevity and optimal performance of your NEBO OMNI 3K, follow these maintenance guidelines:

• Cleaning: Wipe the device with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
• Storage: Store the work light in a cool, dry place away from direct sunlight when not in use.
• Battery Care: Recharge the battery regularly, even if not in frequent use, to maintain battery health. Avoid completely draining the battery for extended periods.

6. Troubleshooting

If you encounter issues with your OMNI 3K, refer to the following common troubleshooting steps:

• Light not turning on: Ensure the battery is charged. Press the power button firmly.
• Dim or weak light output: Recharge the battery. Check if the light is in a low brightness mode and adjust using the "+" button.
• Device not charging: Verify the USB-C cable is securely connected to both the light and the power source. Try a different USB-C cable or power adapter.
• Power bank not charging external devices: Ensure the OMNI 3K has sufficient charge. Check the connection of the external device to the USB-A output port.

7. Specifications

8. Product Overview Video

Watch this official product video for a visual guide to the NEBO OMNI 3K's features and functionality.

9. Warranty and Support

The NEBO OMNI 3K comes with a 1-year manufacturer's warranty. For warranty claims, technical support, or further assistance, please visit the official NEBO website or contact their customer service department. Keep your proof of purchase for warranty validation.

For more information, visit the NEBO Store.