Introduction
This manual provides essential instructions for the assembly, operation, maintenance, and safety of your Outsunny Wicker Double Chaise Lounge Chair, Model 862-023GY. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
Assembly required. Do not leave cushions out in adverse weather. Keep away from heat sources. This product is intended for outdoor use only. Always follow the manufacturer's instructions for proper assembly, usage, and maintenance to ensure safety.
Setup and Assembly
Assembly of the Outsunny Wicker Double Chaise Lounge Chair is required. Please refer to the detailed assembly instructions provided in the packaging for step-by-step guidance. Ensure all components are present before beginning assembly. Use the appropriate tools as specified in the assembly guide and tighten all fasteners securely. Do not overtighten.
Image: Close-up of the PE rattan wicker material, illustrating its hand-woven texture, UV resistance, durability, and weather resistance. This image provides a visual reference for the material quality.
Image: Diagram illustrating the overall dimensions of the double chaise lounge chair, including length, width, and height, provided in both inches and centimeters for accurate measurement.
Operating Instructions
Adjustable Backrest
The chaise lounge features a 5-level adjustable backrest, allowing you to customize your seating position. To adjust, lift the backrest slightly and move it to the desired notch. Ensure both backrests are adjusted to the same level for balanced support.
- Sit Up: Position 1 or 2 for upright seating.
- Lean Back: Position 3 or 4 for relaxed lounging.
- Lay Down Completely Flat: Position 5 for a fully reclined sunbed experience.
Image: Illustration demonstrating the 5-level adjustable backrest mechanism. The image shows the different reclining positions, from fully upright to completely flat, with a close-up of the adjustment notches.
Cushion Use
The lounge chair includes two padded cushions for comfort. These cushions feature tie-fastenings to secure them in place on the lounger, preventing slippage. The cushion covers are removable and washable for easy cleaning.
Image: Detailed view of the cushion, highlighting its thick soft padding, the zipper for removable covers, the washable fabric, and the ties used to secure it to the lounge chair frame.
Image: Close-up demonstrating the cushion's tie-fastening system, showing how the fabric ties are wrapped around the rattan frame to prevent the cushion from shifting during use.
Maintenance
Cleaning the Frame
The PE wicker frame and powder-coated metal frame are designed to be weather-resistant. To clean, simply wipe with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the material finish.
Cushion Care
The cushion covers are washable. Remove the covers and follow the care instructions on the label. It is recommended to store cushions indoors during adverse weather conditions or when not in use for extended periods to prolong their lifespan and maintain their appearance. While weather-resistant, the fabric's waterproof rating is not intended to prevent rain saturation.
Troubleshooting
- Stability Issues: If the lounge chair feels unstable, re-check all assembly fasteners to ensure they are securely tightened.
- Cushion Slippage: Ensure the cushion tie-fastenings are properly secured to the frame.
- Backrest Adjustment Difficulty: Verify that no obstructions are preventing the backrest mechanism from engaging correctly. Apply light pressure to lift the backrest before attempting to adjust.
- Water Accumulation on Cushions: While cushions are weather-resistant, prolonged exposure to heavy rain can lead to water accumulation. Tilt cushions to drain water and allow them to air dry completely. Store indoors during heavy precipitation.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 862-023GY |
| Colour | Grey |
| Overall Dimensions (L x W x H) | 77.25" x 47.25" x 11" (196 x 120 x 28 cm) |
| Item Weight | 29.48 kg |
| Material | Polyethylene (PE Wicker) |
| Special Features | 5-Level Reclining, Cushion Availability, Double Seater, Weather Resistant |
| Assembly Required | Yes |
| Manufacturer | Aosom Canada |
Warranty Information
This product comes with a 90-day warranty against manufacturer defects. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact customer support.
Customer Support
For assistance with assembly, parts, or any other inquiries regarding your Outsunny Wicker Double Chaise Lounge Chair, please contact the manufacturer:
Aosom Canada
Markham, Ontario, CA
Telephone: 1-416-792-6088
Please have your model number (862-023GY) and purchase information ready when contacting support.