Diirglus Computer Monitor Light Bar with Wireless Remote Control - Instruction Manual

1. Introduction

Thank you for choosing the Diirglus Computer Monitor Light Bar. This device is designed to enhance your workspace lighting, reduce eye strain, and provide customizable illumination for various tasks. Please read this manual thoroughly before use to ensure proper installation and operation.

2. Safety Information

• Ensure the power supply voltage matches the product's requirements (5V).
• Do not expose the device to water or excessive moisture.
• Avoid disassembling or modifying the product, as this may void the warranty and pose safety risks.
• Keep the device away from heat sources and direct sunlight.
• Clean the light bar with a soft, dry cloth only.

3. Package Contents

Verify that all items are present in your package:

• Diirglus Computer Monitor Light Bar
• Wireless Remote Control
• USB Type-C Power Cable
• Instruction Manual (this document)

Image: Diirglus Computer Monitor Light Bar and Wireless Remote Control. This image shows the main light bar unit designed to sit atop a monitor, alongside its circular wireless remote control.

4. Setup

4.1. Installing the Remote Control Battery

The wireless remote control requires a CR2 battery (included). Follow these steps to install it:

1. Gently twist the bottom cover of the remote control counter-clockwise to open it.
2. Insert the CR2 battery with the positive (+) side facing up.
3. Replace the bottom cover by twisting it clockwise until secure.

Video: Remote Control Battery Installation. This video demonstrates how to open the remote control, insert the CR2 battery, and close the cover.

4.2. Mounting the Light Bar

The light bar features a 45° adjustable gravity hinge, suitable for flat screens and bezels with a thickness of 1-28mm.

1. Place the light bar on top of your monitor, ensuring the light source faces your desk area.
2. Adjust the gravity hinge to securely fit the light bar onto your monitor.

Image: Asymmetric Light Projection. This image illustrates how the light bar projects light forward onto the desk area without causing glare on the monitor screen.

4.3. Connecting Power

Connect the provided USB Type-C cable to the light bar's Type-C port and plug the other end into a compatible USB power source (e.g., computer USB port, USB wall charger, or mobile power bank).

Image: USB Type-C Power Interface. This image shows the Type-C port on the light bar's mounting bracket, indicating various power source options like computer, charger, or mobile power.

4.4. Pairing the Remote Control (for multiple lights)

If you are using multiple Diirglus monitor light bars and wish to control them with a single remote, follow these pairing instructions:

1. Ensure both light bars are powered on.
2. Within 10 seconds of powering on the light bars, long-press the controller button on the remote control.
3. The light bars will flash, indicating successful pairing.

Video: Pairing Settings for 2 Monitor Lights. This video demonstrates the process of pairing a single wireless remote control with two monitor light bars for synchronized operation.

5. Operating Instructions

The Diirglus Computer Monitor Light Bar offers both touch controls on the light bar and wireless remote control for convenient operation.

5.1. Using the Wireless Remote Control

Image: Wireless Remote Control. A close-up of the circular wireless remote control, highlighting its alloy knob and touch-sensitive surface for adjustments.

• Power On/Off: Short press the top of the remote control to turn the light bar on or off.
• Adjust Brightness: Rotate the remote control clockwise to increase brightness, and counter-clockwise to decrease brightness.
• Adjust Color Temperature: Short press the top of the remote control to cycle through the three color temperature modes (White Light, Mixed Light, Warm Light).

Video: Wireless Control Computer Monitor Light Bar Dimming Switch. This video demonstrates the wireless remote control's functionality, including adjusting brightness and cycling through color temperatures.

5.2. Using Touch Controls on the Light Bar

Image: Light Bar Touch Controls. A detailed view of the touch-sensitive buttons on the light bar itself, used for power, brightness, and color temperature adjustments.

• Power On/Off: Use the dedicated power button on the light bar.
• Adjust Color Temperature: Short press the color temperature button to switch between modes.
• Adjust Brightness: Long press the color temperature button to adjust brightness.

5.3. Color Temperature Modes

Image: Three Color Temperatures. A visual representation of the three available color temperature modes: White Light (6000K), Mixed Light (4200K), and Warm Light (3000K), with examples of their ideal use cases.

• White Light (6000K): Clear lighting, efficient for tasks requiring high focus.
• Mixed Light (4200K): Neutral color temperature, suitable for general use and comfortable reading.
• Warm Light (3000K): Soft and comfortable light, ideal for relaxation or watching movies.

6. Features

• Wireless Dual Control: One remote control can simultaneously manage up to two Diirglus computer monitor lights, ensuring consistent lighting across multiple screens.
• Asymmetric Light Source: The design illuminates the desktop and keyboard area forward without casting light directly onto the screen, effectively preventing screen glare and reflections.
• Eye Protection: Provides a color temperature range of 2900K-6000K with 60 high-quality, flicker-free LED lamp beads, adapting to various scene needs while protecting your eyes.
• Versatile Mounting: Equipped with a 45° adjustable gravity hinge, allowing easy and secure hanging on most flat screens and bezels with a thickness of 1-28mm.
• USB Powered: Supports Type-C interface power supply, compatible with computer USB ports, charging heads, or mobile power banks.

Image: Dual Monitor Setup with Two Light Bars. This image displays two monitors, each equipped with a light bar, demonstrating the dual control capability where one remote can manage both lights.

7. Specifications

8. Troubleshooting

• Light Bar Not Turning On:
  • Ensure the USB Type-C cable is securely connected to both the light bar and the power source.
  • Verify that the power source is active and providing 5V.
• Remote Control Not Working:
  • Check if the CR2 battery is correctly installed and has sufficient charge. Replace if necessary.
  • Ensure the remote is within range of the light bar(s).
  • If using multiple lights, re-attempt the pairing process (Section 4.4).
• Light Flickering:
  • Ensure the power supply is stable and meets the 5V requirement.
  • Try connecting the light bar to a different USB power source.
• Inconsistent Brightness/Color Temperature:
  • If controlling multiple lights, ensure they are properly paired to the remote.
  • Reset the light bar by unplugging and re-plugging the power cable.

9. Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the light bar and remote control. Do not use liquid cleaners or aerosols.
• Storage: When not in use for extended periods, store the light bar and remote in a cool, dry place.
• Battery Replacement: Replace the CR2 battery in the remote control annually or when its performance diminishes.

10. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Diirglus customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.