1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your Diyel Outdoor Post Light Fixture, Model RZ009-P BK. This modern exterior pillar lantern features a black finish and seeded glass, designed for outdoor use in gardens, backyards, courtyards, patios, and porches.
The fixture is constructed from durable, rustproof aluminum and seeded glass, engineered to withstand various weather conditions. It requires one E26 base bulb (not included) with a maximum wattage of 100W and is compatible with LED, CFL, or incandescent bulbs. The product is ETL certified for safety.
2. Important Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Wear safety glasses and gloves during installation.
- Ensure the mounting surface is structurally sound to support the fixture's weight.
- Do not exceed the maximum wattage specified for the bulb (Max. 100W).
- This fixture is rated for outdoor use.
3. Package Contents
Verify that all components are present before beginning installation:
- Outdoor Post Light Fixture (1 unit)
- Mounting Hardware (screws, wire nuts, etc.)
Note: A 3-inch diameter mounting base and E26 bulb are NOT included and must be purchased separately.
4. Product Specifications
| Brand | Diyel |
| Model Number | RZ009-P BK |
| Material | Glass, Metal (Aluminum) |
| Finish Type | Powder Coated Black |
| Shade Material | Aluminum, Seeded Glass |
| Item Dimensions (L x W x H) | 7.18" x 6.2" x 13.7" |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Bulb Base | E26 |
| Max Wattage | 100 Watts |
| Light Source Compatibility | Fluorescent, Incandescent, LED |
| Mounting Type | Post Mount (3" diameter base required) |
| Special Features | Anti-Rust |
| Certifications | ETL Listed |
5. Setup & Installation
This outdoor post light is designed for mounting on a pillar or column with a 3-inch diameter mounting base (not included). All necessary installation hardware is provided.
5.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Ensure the mounting surface is clean, dry, and flat.
- Gather all tools required (screwdriver, wire strippers, electrical tape, etc.).
5.2 Wiring the Fixture
- Carefully unpack the fixture and its components.
- Connect the fixture's wires to your household electrical wires. Typically, the black wire from the fixture connects to the black (hot) wire from the power supply, the white wire from the fixture connects to the white (neutral) wire, and the bare copper or green wire connects to the ground wire. Secure connections with wire nuts and electrical tape.
- Ensure all connections are secure and no bare wires are exposed.
5.3 Mounting the Fixture
- Place the fixture onto your existing 3-inch diameter post mount base.
- Secure the fixture to the post mount using the provided mounting hardware. Ensure it is stable and level.
5.4 Bulb Installation
- Unscrew the top cap of the fixture to access the bulb socket.
- Carefully screw an E26 base bulb (Max. 100W) into the socket. Do not overtighten.
- Replace the top cap and secure it with the screws.
Figure 1: Product dimensions (7.18"L x 6.2"W x 13.7"H).
Video 1: Official demonstration of bulb installation and securing the top of the Diyel Outdoor Post Light Fixture.
Figure 2: The fixture supports E26 base bulbs up to 100W, including LED, Incandescent, and CFL types.
6. Operating Instructions
Once the fixture is properly installed and a bulb is inserted, restore power at the circuit breaker. The light fixture will operate according to the switch or control method connected to your outdoor lighting circuit. This fixture does not include an integrated switch or control method.
Figure 3: The Diyel Outdoor Post Light Fixture providing illumination in an outdoor setting.
7. Maintenance
7.1 Cleaning
- Before cleaning, ensure the power to the fixture is turned off.
- Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Clean the seeded glass panels periodically to maintain optimal light output.
7.2 Bulb Replacement
- Turn off power to the fixture at the circuit breaker.
- Unscrew the top cap of the fixture.
- Carefully unscrew the old bulb and replace it with a new E26 base bulb (Max. 100W).
- Securely replace the top cap.
7.3 Weather Resistance
The fixture is designed with rugged, rustproof materials and seeded glass to withstand various outdoor weather conditions. Regular cleaning helps maintain its appearance and functionality over time.
Figure 4: The fixture is built to be weather-resistant, suitable for various outdoor conditions.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | 1. Power is off. 2. Bulb is faulty or loose. 3. Incorrect wiring. 4. Circuit breaker tripped. | 1. Ensure power is on at the switch and circuit breaker. 2. Check if the bulb is securely screwed in. Replace the bulb if necessary. 3. Verify wiring connections are correct and secure (consult an electrician if unsure). 4. Reset the circuit breaker. |
| Light flickers. | 1. Loose bulb. 2. Loose wiring connection. 3. Incompatible bulb type. | 1. Tighten the bulb in the socket. 2. Check and secure all wiring connections (with power off). 3. Ensure the bulb is compatible with the fixture (E26 base, Max 100W). |
| Fixture is damaged or appears unstable. | 1. Improper installation. 2. Physical impact. | 1. Re-check mounting hardware and ensure the fixture is securely attached to the post base. 2. Inspect for visible damage. If significant, contact customer support for replacement or repair options. |
9. Warranty & Support
This Diyel Outdoor Post Light Fixture comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover:
- Damage caused by improper installation or maintenance.
- Damage caused by misuse, abuse, accident, or neglect.
- Damage from natural disasters or acts of God.
- Normal wear and tear.
For warranty claims or technical support, please contact Diyel customer service through the retailer where the product was purchased. Please have your proof of purchase and model number (RZ009-P BK) available.