SEOBIOG PLLGL0001

SEOBIOG 200W 20000LM Linkable LED Garage Light Instruction Manual

Model: PLLGL0001

Brand: SEOBIOG

1. Safety Instructions

Please read all instructions carefully before installation and use. Retain this manual for future reference.

  • Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
  • Electrical Safety: Ensure the power supply is disconnected before installation or maintenance. Use with a compatible 120V power source.
  • Temperature Range: Operate within an ambient temperature range of -30°C to 50°C (-22°F to 122°F). Exceeding this range may affect product lifespan.
  • Damage Inspection: Check for any damage after unpacking. If any damage is found, do not use the light and contact customer support for replacement.
  • Non-Replaceable Light Source: The LED light source is not user-replaceable. Do not attempt to disassemble the light panels.
  • Ventilation: The hollow design with 192 heat dissipation holes is crucial for cooling. Ensure adequate airflow around the fixture.

2. Product Overview

The SEOBIOG Linkable LED Garage Light provides ultra-bright, energy-efficient illumination for various indoor spaces. Its unique deformable design allows for adjustable light direction, ensuring comprehensive coverage without dark spots.

SEOBIOG 200W 20000LM Linkable LED Garage Light with 6 deformable panels

Figure 1: SEOBIOG 200W 20000LM Linkable LED Garage Light

Key Features:

  • Ultra Bright Illumination: Equipped with 312 upgraded LED chips, 6 deformable panels, and 1 central glowing panel, delivering 200W and 20000LM of 6500K daylight.
  • Linkable Design: Each unit includes a 9.84ft power cord, allowing up to 4 lights to be seamlessly connected and controlled by a single switch.
  • Deformable Panels: Six adjustable light panels can fold up to 90 degrees, providing 360-degree light coverage and eliminating dark areas, ghosting, or glare.
  • Efficient Heat Dissipation: Features a hollow design with 192 heat dissipation holes to maintain optimal operating temperature and extend lifespan.
  • Energy Saving: Utilizes upgraded energy-saving chips, reducing electricity consumption by over 80% with a lifespan exceeding 50,000 hours.
  • Easy Installation: Supports both Hanging Hook Mount and Hanging Chain Mount options, with an adjustable wire rope (0-3.28 ft retractable).

3. Package Contents

Verify that all items are present and in good condition:

  • SEOBIOG 200W 20000LM Linkable LED Garage Light Unit (x2)
  • 9.84ft Power Cord with Built-in ON/OFF Switch (x2)
  • Hanging Chain Mount / Hanging Hook Mount Hardware (x2 sets)
  • Instruction Manual (this document)

4. Setup

4.1 Installation Methods

The SEOBIOG LED Garage Light offers two primary installation methods: Hanging Hook Mount and Hanging Chain Mount. Both methods allow for adjustable height.

Diagram showing ceiling mounting and suspending mounting options for the LED light

Figure 2: Installation Options (Ceiling Mounting / Suspending Mounting)

  1. Prepare Mounting Location: Identify a suitable location on your ceiling or overhead structure that can safely support the weight of the light fixture(s). Ensure there are no electrical wires or pipes in the drilling path if using screws.
  2. Install Mounting Hardware:
    • For Hanging Hook Mount: Securely screw the provided hook into the ceiling or a sturdy beam.
    • For Hanging Chain Mount: Install two hooks or appropriate anchors into the ceiling, spaced to accommodate the light fixture. Attach the hanging chains to these hooks.
  3. Attach Light Fixture: Connect the light fixture's integrated hanging mechanism to the installed hook or chains.
  4. Adjust Height (if applicable): The wire rope can be freely retracted from 0-3.28 ft. Press and hold the button on the hook to adjust the wire rope to the desired length. Release the button to lock the length.
Diagram showing how to adjust the steel wire rope for height adjustment

Figure 3: Adjustable Steel Wire Rope Mechanism

4.2 Linking Multiple Lights

The SEOBIOG LED Garage Light features a linkable design, allowing you to connect up to 4 units together using a single power outlet.

  1. Install the first light fixture as described in Section 4.1.
  2. Position subsequent light fixtures within 9.84ft of the previous one.
  3. Connect the power cord of the second light into the designated linking port on the first light. Repeat for up to 4 lights.
  4. Plug the main power cord (from the first light) into a standard 120V electrical outlet.
Diagram showing multiple LED garage lights linked together and plugged into a single outlet

Figure 4: Linkable Design for Multiple Units

5. Operating Instructions

5.1 Power On/Off

Each light unit comes with a built-in ON/OFF switch on its power cord. Simply toggle the switch to turn the light(s) on or off. If multiple units are linked, the switch on the first unit will control all connected lights.

5.2 Adjusting Light Panels

The 6 LED panels are deformable and can be manually adjusted up to 90 degrees. Gently move each panel to direct light to specific areas, optimizing illumination for your workspace.

Close-up of the LED garage light with panels adjusted to different angles

Figure 5: Deformable LED Panels for Customized Lighting

6. Maintenance

To ensure optimal performance and longevity of your SEOBIOG LED Garage Light, follow these simple maintenance guidelines:

  • Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the light fixture. Do not use abrasive cleaners, solvents, or liquids that could damage the LED chips or housing.
  • Inspection: Periodically check the power cord and connections for any signs of wear or damage.
  • Ventilation: Ensure the heat dissipation holes remain clear of dust and debris to prevent overheating.

7. Troubleshooting

If you encounter any issues with your LED Garage Light, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Light does not turn onNo power to the outlet
Switch is off
Loose connection
Check the power outlet with another device.
Ensure the ON/OFF switch is in the 'ON' position.
Verify all power cord connections are secure.
Light flickersUnstable power supply
Loose connection
Try plugging into a different outlet.
Check all connections for tightness.
Not bright enoughPanels not fully extended/angled correctly
Too few lights for the area
Adjust the deformable panels to direct light where needed.
Consider adding more linkable units for larger spaces.

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

FeatureSpecification
Model NumberPLLGL0001
Wattage200 Watts
Brightness20000 Lumens
Color Temperature6500 Kelvin (Daylight)
Light Source TypeLED (312 pcs)
Number of Panels6 Deformable Panels + 1 Central Panel
Beam Angle360 Degrees (adjustable)
LifespanOver 50,000 hours
Power Cord Length9.84 ft
Voltage120 Volts
MaterialAcrylonitrile Butadiene Styrene, Aluminum, Polycarbonate
Product Dimensions11.88"L x 11.88"W x 4.88"H
Item Weight2.53 Pounds
Installation TypeHanging Chain Mount / Hanging Hook Mount
Water Resistance LevelNot Water Resistant
Diagram showing product specifications including dimensions, wattage, lumens, and color temperature

Figure 6: Product Specifications Overview

9. Warranty and Support

9.1 Warranty Information

This SEOBIOG LED Garage Light is covered by a 1-year manufacturer's limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

9.2 Customer Support

For technical assistance, warranty claims, or any questions regarding your SEOBIOG product, please contact our customer support team:

10. Product Videos

Watch these official product videos for additional insights into the SEOBIOG LED Garage Light:

Linkable LED Garage Light Overview

This video provides a concise overview of the SEOBIOG Linkable LED Garage Light, demonstrating its features and benefits. It highlights the linkable design and overall functionality.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.