Walk H202C

Walk H202 Wireless Speaker User Manual

Model: H202C

1. Introduction

Thank you for purchasing the Walk H202 Wireless Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. The H202 is a compact and powerful wireless speaker featuring Bluetooth 5.0 connectivity and TruSound Technology for enhanced audio.

Front view of the Walk H202 Wireless Speaker

Figure 1.1: Front view of the Walk H202 Wireless Speaker, showcasing its black finish and speaker grille.

2. What's in the Box

Please check the contents of your package to ensure all items are present:

  • Walk H202 Wireless Speaker
  • USB Cable (for charging)
Packaging of the Walk H202 Wireless Speaker

Figure 2.1: The retail packaging for the Walk H202 Wireless Speaker.

3. Setup

3.1 Charging the Speaker

Before first use, fully charge the speaker. Use the included USB cable to connect the speaker's charging port to a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will illuminate during charging and turn off when fully charged. A full charge takes approximately 2-3 hours.

3.2 Powering On/Off

  • To power on: Press and hold the Power button until you hear an audible prompt.
  • To power off: Press and hold the Power button again until you hear an audible prompt.

3.3 Bluetooth Pairing

The Walk H202 speaker uses Bluetooth 5.0 for wireless connectivity.

  1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED).
  2. On your smartphone, tablet, or other Bluetooth-enabled device, navigate to the Bluetooth settings.
  3. Search for available devices. You should see "Walk H202" in the list.
  4. Select "Walk H202" to initiate pairing. Once connected, the speaker will provide an audible confirmation, and the LED indicator will stop flashing.

Note: The speaker will automatically attempt to reconnect to the last paired device when powered on.

4. Operating the Speaker

4.1 Basic Controls

  • Play/Pause: Press the Play/Pause button (often marked with a triangle or a play/pause symbol) to toggle playback.
  • Volume Up: Press the '+' button to increase volume.
  • Volume Down: Press the '-' button to decrease volume.
  • Next Track: Press and hold the '+' button (or a dedicated next track button) to skip to the next song.
  • Previous Track: Press and hold the '-' button (or a dedicated previous track button) to go to the previous song.

4.2 USB Input

The speaker supports audio playback via USB input. Insert a USB flash drive containing audio files into the USB port. The speaker should automatically switch to USB mode and begin playback. Use the same control buttons for play/pause, volume, and track navigation.

Walk H202 Wireless Speaker in a home office setting

Figure 4.1: The Walk H202 Wireless Speaker positioned on a desk, demonstrating its compact size for various environments.

5. Maintenance

5.1 Cleaning

To clean the speaker, use a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid getting moisture into any openings.

5.2 Storage

When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery at least once every three months to maintain battery health.

5.3 Battery Care

The speaker contains a built-in rechargeable Lithium Ion battery. To prolong battery life:

  • Avoid fully discharging the battery frequently.
  • Do not expose the speaker to high temperatures.
  • Use only the provided USB cable for charging.

6. Troubleshooting

ProblemPossible CauseSolution
Speaker does not power on.Battery is depleted.Charge the speaker fully using the USB cable.
No sound from speaker.Volume is too low or muted. Device not connected.Increase speaker and device volume. Ensure Bluetooth is connected or USB is properly inserted.
Cannot pair via Bluetooth.Speaker not in pairing mode. Device too far. Interference.Ensure speaker is in pairing mode (flashing LED). Move device closer to speaker. Turn off other Bluetooth devices.
Poor sound quality.Low battery. Device too far. Obstructions.Charge the speaker. Move device closer. Remove obstructions between speaker and device.

7. Specifications

FeatureDetail
Model NameH202
Item Model NumberH202C
BrandWalk
Connectivity TechnologyBluetooth 5.0, USB
Speaker TypeSoundbar
Speaker Maximum Output Power3 Watts (2 x 3W)
Battery Life3 Hours
Charging Time2-3 Hours
Power SourceBattery Powered (1 Lithium Ion battery included)
Item Weight391 Grams (13.8 ounces)
Product Dimensions6.69 x 3.15 x 2.76 inches
Impedance40 Ohm
Signal-to-Noise Ratio85 dB
Water Resistance LevelNot Water Resistant
Back of the Walk H202 Wireless Speaker packaging showing specifications

Figure 7.1: Rear view of the product packaging, detailing technical specifications and features.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. You may also visit the official Walk brand website for further assistance.

Important: This product is not a toy. Keep away from children and animals.

Barcode: 5060450979184

© 2024 Walk. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.