1. Introduction and Overview
The GeekVape Soul / S30 Pod System is a compact and ergonomically designed vaping device, engineered for ease of use and a satisfying experience. It integrates a powerful 1500 mAh battery and a clear 0.69-inch OLED display to provide essential information at a glance. This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your device.
Figure 1: The GeekVape Soul / S30 Pod System in gunmetal, showcasing its sleek design and integrated display.
Figure 2: The GeekVape Soul / S30 Pod System available in various color options, highlighting its compact and portable form factor.
2. Package Contents
Please check the package for the following items:
- 1x GeekVape Soul / S30 Pod System
- 1x GeekVape Soul / S30 0.6 Ohm Cartridge (pre-installed)
- 1x GeekVape Soul / S30 1.0 Ohm Cartridge
- 1x USB-C Cable
- 1x User Manual
Note: This product does not contain pre-filled cartridges, liquids, nicotine, or tobacco.
3. Product Features
- Ergonomic Design: Crafted for comfortable handling with a high-quality finish.
- Integrated Battery: 1500 mAh capacity for extended use.
- Fast Charging: USB-C port with a maximum charging current of 0.5 A.
- OLED Display: 0.69-inch screen for clear display of battery status, wattage, and other information.
- Adjustable Wattage: Power output from 5W to 30W, adjustable via the fire button.
- Auto-Draw Activation: Inhale to activate the device.
- VPU Meshed Coils: Ensures smooth draw and intense flavor.
- Side-Fill System: Convenient and mess-free refilling of the 4 ml cartridges.
- Leak-Proof Top-Airflow: Patented design to prevent leaks and allow airflow customization.
- Comprehensive Protection Functions: Includes automatic shutdown, short-circuit protection, overheating protection, deep discharge protection, and overcharge protection.
Figure 3: A detailed view of the 0.69-inch OLED display, showing battery level, wattage, and coil resistance.
Figure 4: An X-ray view illustrating the internal 1500mAh battery, emphasizing the device's power source.
Figure 5: A cutaway view demonstrating the patented top-airflow system, designed for leak prevention and customizable draw.
4. Setup
4.1 Initial Charging
Before first use, fully charge the device. Connect the supplied USB-C cable to the USB-C port on the device and plug the other end into a suitable power source (e.g., a computer USB port or a 5V/0.5A wall adapter). The display will indicate the charging status. Charging time is approximately 120 minutes.
4.2 Installing the Pod Cartridge
- Ensure the pod cartridge is properly filled with e-liquid (see 4.3).
- Align the contacts on the bottom of the pod cartridge with the contacts inside the device.
- Gently push the pod cartridge into the device until it clicks securely into place.
4.3 Filling the Pod Cartridge
The GeekVape Soul / S30 cartridges feature a convenient side-fill system.
- Remove the pod cartridge from the device.
- Locate the silicone stopper on the side of the cartridge.
- Carefully lift the silicone stopper to expose the filling port.
- Insert the nozzle of your e-liquid bottle into the filling port and slowly fill the cartridge with up to 4 ml of your preferred e-liquid.
- Once filled, securely close the silicone stopper to prevent leaks.
- Allow the coil to prime for 5-10 minutes after the first fill or after installing a new cartridge to ensure the cotton is fully saturated. This prevents dry hits and extends coil life.
5. Operating Instructions
5.1 Power On/Off
To turn the device on or off, rapidly press the fire button 5 times within 2 seconds. The display will show a power on/off animation.
5.2 Adjusting Wattage
To adjust the wattage, rapidly press the fire button 3 times. The wattage value on the display will begin to flash. Press the fire button repeatedly to cycle through the wattage settings (5W to 30W). Once the desired wattage is displayed, stop pressing the button; the device will automatically set the wattage after a few seconds of inactivity.
5.3 Vaping
The GeekVape Soul / S30 features an auto-draw activation. Simply inhale through the mouthpiece to activate the device and produce vapor.
5.4 Checking Battery Level
The 0.69-inch OLED display conveniently shows the current battery level. Monitor this indicator to know when to recharge your device.
5.5 Adjusting Airflow
The top-airflow system can be adjusted to customize your draw preference. Rotate the airflow control ring located on the top of the pod cartridge to increase or decrease airflow.
6. Maintenance
6.1 Cleaning the Device
Regularly clean the device, especially the pod connection area, to prevent e-liquid residue buildup. Use a dry cloth or cotton swab to wipe down the contacts and the inside of the pod slot. Do not use harsh chemicals or abrasive cleaners.
6.2 Replacing the Pod Cartridge
The pod cartridges contain integrated coils and should be replaced when you notice a burnt taste, reduced vapor production, or a change in flavor. To replace, simply pull the old cartridge out of the device and insert a new one (see 4.2).
7. Troubleshooting
- Device Not Firing:
- Ensure the device is powered on (5 clicks of the fire button).
- Check battery level and recharge if necessary.
- Ensure the pod cartridge is correctly installed and making good contact.
- Replace the pod cartridge if the coil is burnt out.
- No Vapor Production:
- Check e-liquid level and refill if low.
- Ensure the coil is properly primed (allow 5-10 minutes after filling a new pod).
- Replace the pod cartridge.
- Leaking:
- Ensure the silicone stopper on the filling port is securely closed.
- Check for cracks or damage on the pod cartridge.
- Ensure the pod is correctly seated in the device.
- Avoid overfilling the cartridge.
- Burnt Taste:
- E-liquid level is too low; refill immediately.
- Coil needs to be replaced.
- Ensure the coil is properly primed before first use or after refilling.
If issues persist, please contact GeekVape customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Dimensions | 107.85 x 31.45 x 21.50 mm |
| Weight | 52 grams |
| Screen | 0.69" OLED |
| Power Range | 5 - 30 W |
| Battery Capacity | 1500 mAh |
| Charging Voltage | 5 V |
| Max. Charging Current | 0.5 A |
| Charging Port | USB-C |
| Pod Cartridge Capacity | 4 ml |
| Available Cartridges | 0.6 Ohm (15W - 30W), 1.0 Ohm (5W - 15W) |
| Model Number | hykutx-517610 |
| Color | gunmetal (other colors available) |
9. Safety Information
Please read and understand the following safety precautions before using your GeekVape Soul / S30 Pod System:
- Keep the device out of reach of children and pets.
- This product is intended for adult users only.
- Do not use the device if it is damaged or has been exposed to water.
- Use only the supplied USB-C cable for charging.
- Do not charge the device overnight or leave it unattended while charging.
- Avoid extreme temperatures (hot or cold) and direct sunlight.
- Do not disassemble or modify the device.
- Dispose of the device and battery responsibly according to local regulations.
- The device includes multiple protection features such as automatic shutdown, short-circuit protection, overheating protection, deep discharge protection, and overcharge protection to ensure safe operation.
10. Warranty and Support
Specific warranty information for this product was not provided in the available data. Please refer to the official GeekVape website or contact your retailer for detailed warranty terms and conditions. For technical support or inquiries, please visit the GeekVape support page or contact their customer service directly.
