FULIHUAPOW JR1930RX-2-24V 2.4G Remote Control and Receiver Instruction Manual

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your FULIHUAPOW JR1930RX-2-24V 2.4G Remote Control and Receiver system. This system is designed for specific children's ride-on toys operating at 24V. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The FULIHUAPOW JR1930RX-2-24V remote control and receiver unit. The image displays both components side-by-side, showing the black remote with gray buttons and the black receiver box with its model number and specifications printed on it.

Compatibility Check

Before installing, verify that this control box is compatible with your ride-on toy. Open your existing electric ride-on car and compare the appearance of the original control box with the images provided in this manual. If the appearance matches, this part should be compatible.

Image: Top view of the FULIHUAPOW JR1930RX-2-24V Receiver. This image clearly shows the model number, supply voltage (DC 24V), load current (Max 25A), and frequency range (2.407GHz-2.473GHz) printed on the label, along with the connection ports.

Image: Angled view of the FULIHUAPOW JR1930RX-2-24V Receiver. This perspective highlights the side profile and the various connection terminals at the bottom, providing a comprehensive view of the unit's physical structure.

Setup and Pairing Instructions

Follow these steps to establish a connection between the remote control and the receiver:

1. Prepare the Remote Control: Ensure the remote control has fresh batteries installed. Refer to the "Battery Installation" section for details.
2. Initiate Pairing on Remote: Press and hold the "Car Select" button (often labeled 'S' or a similar icon) on the remote control. The remote indicator light will begin to flash.
3. Power On the Vehicle: While still holding the button on the remote, turn on the power of the ride-on car.
4. Confirm Connection: The remote indicator light will stop flashing and turn off, indicating a successful connection with the car.
5. Release Button: Release the "Car Select" button. The remote control is now ready for use.

Note: You may need to resync the remote control every time you change its batteries. Refer to the linking operation manual on the remote control box itself for specific instructions if needed.

Operating the Remote Control

The remote control allows you to operate the ride-on toy. Familiarize yourself with the button layout:

Image: Front view of the FULIHUAPOW remote control. This image shows the ergonomic design of the black remote with its gray directional and function buttons, including the 'S' (Select/Code) button and speed indicator lights.

Image: Diagram illustrating the remote control's buttons and battery installation. This diagram labels buttons for Forward, Back, Speed, Stop, Right, Left, and Code, and shows how to load two AAA (1.5V) batteries into the compartment after loosening a screw.

• Forward/Back: Controls the direction of the vehicle.
• Speed: Adjusts the speed setting of the vehicle. The product features a slow start function, eliminating the need for additional slow starter installation.
• Stop (P): Halts the vehicle's movement.
• Right/Left: Steers the vehicle.
• Code (S): Used for pairing the remote with the receiver.
• Speed Indicator: Displays the current speed setting.

Maintenance

Battery Installation (Remote Control)

To install or replace batteries in the remote control:

1. Locate the battery compartment on the back of the remote control.
2. Loosen the screw securing the battery cover (as indicated in the diagram).
3. Remove the battery cover.
4. Insert two AAA (1.5V) batteries, ensuring correct polarity (+/-).
5. Replace the battery cover and tighten the screw.
6. After changing batteries, you may need to re-pair the remote control with the receiver as described in the "Setup and Pairing Instructions" section.

Image: Back of the FULIHUAPOW remote control. This view shows the battery compartment cover, the screw for securing it, and regulatory information including the Model: JR1939FCC and FCC ID: 2AWQBJR1939.

General Care

• Keep the remote control and receiver dry and away from moisture.
• Avoid dropping or subjecting the components to strong impacts.
• Clean with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

Troubleshooting

• Remote Control Not Responding:
  • Check if the batteries in the remote control are correctly installed and have sufficient charge. Replace if necessary.
  • Re-pair the remote control with the receiver following the "Setup and Pairing Instructions".
  • Ensure there are no obstructions between the remote control and the ride-on toy.
• Vehicle Not Moving:
  • Verify that the ride-on toy's power is on.
  • Confirm that the remote control is successfully paired with the receiver.
  • Check all electrical connections to the receiver for secure fit.
• Intermittent Connection:
  • Ensure the remote control batteries are not low.
  • Avoid operating in areas with strong electromagnetic interference.
  • Maintain a clear line of sight between the remote and the vehicle.

Specifications

Warranty and Support

Specific warranty information for the FULIHUAPOW JR1930RX-2-24V Remote Control and Receiver is not provided in the product details. For warranty claims, technical assistance, or further support, please contact the seller or manufacturer directly through your purchase platform or their official contact channels.