1. Introduction
The Autel Robotics EVO Nano+ is an ultralight, foldable camera drone designed for both beginners and experienced pilots. Weighing only 249 grams, it offers advanced features such as a 50MP 4K camera, three-way obstacle avoidance, and a robust image transmission system, making it an ideal companion for capturing high-quality aerial footage.
2. What's in the Box
Carefully unpack your EVO Nano+ Premium Bundle and ensure all components are present:
- EVO Nano+ Aircraft
- Remote Control
- Intelligent Flight Batteries (3 included in Premium Bundle)
- Propellers (Spare set included)
- Battery Charger
- USB-C Charging Cable
- RC Cables (Lightning, USB-C, Micro USB)
- Screwdriver and Spare Screws
- Carrying Case
Image: The EVO Nano+ drone and its complete set of accessories, including batteries, remote control, propellers, charger, cables, and carrying case.
3. Key Features
3.1 Ultralight and Foldable Design
Weighing just 249 grams, the EVO Nano+ is designed for portability and ease of transport. Its foldable arms allow it to be compactly stored and carried, fitting into small bags or even the palm of your hand.
Image: A hand holding the compact, folded EVO Nano+ drone, demonstrating its small size and portability.
3.2 Advanced Camera System
The EVO Nano+ features a 1/1.28-inch CMOS sensor capable of capturing 50MP photos and 4K/30fps HDR video. The RYYB color filter array and f/1.9 aperture enhance low-light performance, while the PDAF + CDAF autofocus system ensures sharp, precise imagery.
Image: An exploded view diagram highlighting the 4K/30 HDR video and 1/1.28" CMOS sensor components within the drone's camera.
3.3 Three-Way Obstacle Avoidance
Equipped with three-way binocular vision sensors, the EVO Nano+ can perceive obstructions in front, behind, and below it. This advanced obstacle avoidance system significantly reduces the risk of collisions, enhancing flight safety, especially for new pilots.
Image: A visual representation of the drone's three-way binocular obstacle avoidance system, emphasizing flight safety.
3.4 Long Range Transmission
The Autel SkyLink image transmission system provides a transmission range of up to 6.2 miles (10 km) with 2.7K/30FPS video quality. This robust system offers superior anti-interference capabilities, ensuring clear and stable real-time video feeds.
Image: The remote controller connected to a smartphone, illustrating the high transmission quality and range of 6.2 miles.
4. Setup Guide
4.1 Unfolding the Aircraft
- Place the drone on a flat surface with the camera facing forward.
- Gently unfold the front arms first, then the rear arms, until they click into place.
- Ensure all arms are fully extended and locked.
Image: A close-up of a hand unfolding one of the drone's arms, demonstrating the folding mechanism.
4.2 Battery Installation and Charging
- Insert the intelligent flight battery into the battery compartment on the rear of the aircraft until it clicks securely.
- To charge, connect the battery charger to a power outlet and then to the battery or the multi-charger hub. The LED indicators on the battery will show charging status.
- Ensure batteries are fully charged before each flight.
4.3 Propeller Attachment (if required)
The EVO Nano+ typically comes with propellers pre-installed. If replacement is needed:
- Match the propellers with the corresponding motor bases (indicated by markings).
- Press down on the propeller and twist in the direction indicated on the motor until it locks.
- Ensure all propellers are securely attached and free from damage before flight.
Image: A detailed view of a propeller being attached to the drone's motor, showing the secure fitting mechanism.
4.4 Remote Controller and App Connection
- Download the Autel Sky app from your device's app store.
- Mount your smartphone to the remote controller's phone holder.
- Connect your smartphone to the remote controller using the appropriate RC cable.
- Power on the remote controller, then the aircraft.
- Open the Autel Sky app and follow the on-screen instructions to connect to the drone.
5. Operating Instructions
5.1 Pre-Flight Checklist
- Ensure drone and remote controller batteries are fully charged.
- Check propellers for any damage or loose connections.
- Verify the camera gimbal protector is removed.
- Confirm sufficient storage space on the microSD card.
- Check the flight environment for obstacles, restricted airspace, and weather conditions.
5.2 Takeoff and Landing
- Place the drone on a flat, open surface.
- In the Autel Sky app, tap the auto-takeoff icon. The drone will automatically ascend to a safe height.
- To land, tap the auto-landing icon. The drone will descend and land automatically. Alternatively, use the left stick to manually descend.
5.3 Basic Flight Controls
Familiarize yourself with the remote controller's stick movements:
- Left Stick (Mode 2): Up/Down for altitude (throttle), Left/Right for yaw (rotation).
- Right Stick (Mode 2): Up/Down for pitch (forward/backward), Left/Right for roll (sideways).
5.4 Camera Operation
Use the Autel Sky app to control the camera:
- Tap the shutter button to take photos.
- Tap the record button to start/stop video recording.
- Adjust camera settings (ISO, Shutter Speed, White Balance) within the app.
- Use the gimbal dial on the remote controller to adjust camera tilt.
Image: A high-resolution aerial photograph of a waterfall, showcasing the camera's capability to capture detailed landscapes.
5.5 Cinematic Flight Modes
The EVO Nano+ offers several intelligent flight modes for dynamic shots:
- Rocket: The drone ascends vertically with the camera locked on the subject.
- Fadeaway: The drone flies backward and upward, fading the subject out of view.
- Orbit: The drone circles around a designated point of interest.
- Flick: The drone quickly flies past the subject, capturing a dynamic shot.
Image: A graphic depicting the four cinematic flight modes: Rocket, Fadeaway, Orbit, and Flick, showing their flight paths.
6. Maintenance
6.1 Cleaning
- Wipe the drone body with a soft, dry cloth after each flight.
- Gently clean the camera lens with a lens cleaning cloth.
- Remove any debris from motors and propeller bases.
6.2 Propeller Inspection and Replacement
- Regularly inspect propellers for cracks, bends, or chips.
- Replace damaged propellers immediately using the provided screwdriver and spare screws.
6.3 Battery Care and Storage
- Store batteries in a cool, dry place, away from direct sunlight.
- Do not overcharge or over-discharge batteries.
- If storing for extended periods, discharge batteries to approximately 50-60% capacity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not power on | Low battery; Battery not properly inserted | Charge battery; Reinsert battery securely |
| No image transmission | Poor connection; App issue | Reconnect drone and controller; Restart app/device |
| Drone drifts during flight | Strong winds; Compass interference; IMU calibration needed | Fly in calm conditions; Recalibrate compass/IMU via app |
| Propellers not spinning | Propellers blocked; Motor error | Clear obstruction; Contact support if error persists |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Autel Robotics |
| Model Name | EVO Nano |
| Item Model Number | 102000750 |
| Item Weight | 249 Grams (8.8 ounces) |
| Camera Sensor | 1/1.28" CMOS, 50 MP |
| Video Capture Resolution | 4K |
| Max Transmission Range | 6.2 Miles (10 km) |
| Obstacle Avoidance | Three-way binocular vision sensors |
| Battery Capacity | 3930 mAh Lithium Ion |
| Control Type | Remote Control |
| Connectivity Technology | USB, Wi-Fi, Bluetooth |
| Material | Plastic/Composite |
| UPC | 889520012478 |
9. Warranty and Support
Autel Robotics products come with a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Autel Robotics website or contact their customer service. Keep your proof of purchase for warranty claims.
For further assistance, refer to the Autel Sky app's help section or visit the Autel Robotics support page online.
