Introduction
Thank you for choosing the stambord 2-Light Bathroom Vanity Light. This fixture features a black and gold design with clear glass shades, suitable for various indoor settings including bathrooms, bedrooms, and hallways. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.
Image: The stambord 2-Light Bathroom Vanity Light, showcasing its black and gold finish with clear glass shades, mounted above a round mirror in a contemporary bathroom.
Safety Information
- Always turn off the main power supply at the circuit breaker before installing, cleaning, or replacing bulbs.
- Consult a qualified electrician if you are unsure about the installation process.
- Use only E26 base bulbs with a maximum wattage of 40W. Exceeding the recommended wattage may cause overheating and damage to the fixture.
- Ensure all electrical connections are secure and comply with local electrical codes.
- Do not install the fixture on a wet surface or in areas with excessive moisture without proper sealing. This fixture is water-resistant, suitable for damp locations like bathrooms, but not for direct water exposure.
- Handle glass shades with care to prevent breakage.
Package Contents
Verify that all components are present and undamaged before installation:
- 1 x stambord 2-Light Bathroom Vanity Light Fixture
- Mounting Hardware (screws, wire nuts, mounting bracket)
- 2 x Clear Glass Shades
- Instruction Manual
Note: E26 bulbs are not included and must be purchased separately.
Specifications
| Feature | Detail |
|---|---|
| Brand | stambord |
| Model Number | e5c031a9-8c02-40d6-a0d9-415e526f5678 |
| Dimensions (L x W x H) | 12.2" x 9.06" x 7.87" (31cm x 23cm x 20cm) |
| Material | Metal, Glass |
| Color | Black and Gold |
| Shade Material | Clear Glass |
| Bulb Base | E26 |
| Max Wattage per Bulb | 40W |
| Number of Lights | 2 |
| Power Source | Corded Electric |
| Installation Type | Wall Mount |
| Water Resistance Level | Water Resistant (suitable for damp locations) |
| UPC | 780279624892 |
Image: A detailed diagram illustrating the dimensions of the vanity light fixture.
Setup and Installation
Follow these steps to install your stambord 2-Light Bathroom Vanity Light. Ensure power is OFF at the circuit breaker before starting.
- Prepare the Mounting Surface: Ensure the electrical box is securely installed in the wall.
- Attach Mounting Bracket: Secure the mounting bracket to the electrical box using the provided screws.
- Make Electrical Connections: Connect the fixture's wires to your household wiring. Connect the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Use wire nuts to secure connections.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it with the provided screws. The fixture can be mounted with the glass shades facing either upward or downward, based on your preference.
- Install Bulbs: Screw in two E26 base bulbs (Max 40W, not included) into the ceramic sockets.
- Attach Glass Shades: Carefully place the clear glass shades over the bulb sockets and secure them according to the fixture design (typically by screwing a retaining ring or cap).
- Restore Power: Turn on the main power supply at the circuit breaker.
Image: Illustration demonstrating the flexibility of mounting the light fixture with shades facing either upward or downward.
Image: Examples of compatible E26 bulb types (LED, CFL, Incandescent, Halogen) for the fixture.
Video: An official product video demonstrating the stambord Black and Gold Vanity Light, including its features and potential installation context.
Operating Instructions
The stambord 2-Light Bathroom Vanity Light operates via a standard wall switch (not included). Once installed and connected to power, simply use your existing wall switch to turn the light fixture ON or OFF.
- Turning On/Off: Flip the connected wall switch to the 'ON' position to illuminate the bulbs. Flip it to the 'OFF' position to turn them off.
- Dimmable Functionality: If using dimmable E26 bulbs and a compatible dimmer switch (both not included), you can adjust the light intensity to suit your ambiance needs.
Image: Visual representation of the light fixture when turned ON and OFF.
Maintenance
- Cleaning: To clean the fixture, ensure the power is off. Wipe the metal parts with a soft, dry cloth. For the glass shades, use a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: Before replacing bulbs, turn off the power at the circuit breaker. Allow bulbs to cool completely. Unscrew the old bulb and screw in a new E26 base bulb (Max 40W). Re-secure the glass shade.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Glass shade is loose. |
|
|
Warranty and Support
stambord is committed to providing high-quality products and excellent customer service. If your bathroom vanity light fixture has any defects or stops working, please contact our customer support team. We will respond and assist you within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official stambord website.