Connubia CB624
Connubia New York CB624 Swivel Office/Home Chair User Manual
Model: CB624
Introduction
Thank you for choosing the Connubia New York CB624 Swivel Office/Home Chair. This chair is designed for comfort and functionality, suitable for both office and home environments. It features a swivel mechanism and adjustable height for optimal ergonomic positioning. Please read this manual carefully before assembly and use to ensure proper operation and maintenance.
Image: The Connubia New York CB624 Swivel Office/Home Chair in white with a chrome metal base and five casters.
Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Ensure all components are securely fastened before use.
- Do not stand on the chair.
- Keep children away from moving parts during adjustment.
- Use the chair on a flat, stable surface.
Package Contents
Verify that all parts are present before beginning assembly:
- Seat and Backrest Assembly (Upholstered)
- Metal Base with Casters
- Gas Lift Cylinder
- Assembly Hardware (screws, washers, Allen key)
- Instruction Manual (this document)
Setup and Assembly
Follow these steps to assemble your Connubia New York CB624 chair:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Casters: Insert the casters into the holes at the end of each leg of the metal base. Push firmly until they click into place.
- Insert Gas Lift: Place the larger end of the gas lift cylinder into the center hole of the metal base.
- Attach Seat to Gas Lift: Carefully align the mechanism under the seat with the top of the gas lift cylinder. Press the seat down firmly onto the gas lift until it is securely seated.
- Final Check: Ensure all connections are secure and the chair is stable before use.
Operating Instructions
Your Connubia New York CB624 chair offers the following adjustable features:
- Height Adjustment: To raise the seat, lift the lever located under the right side of the seat while standing. To lower the seat, lift the lever while seated. Release the lever at your desired height.
- Swivel Function: The chair is designed to swivel 360 degrees for easy movement and access.
Maintenance and Care
Proper care will extend the life of your chair:
- Cleaning the Upholstery: For the Ekos White upholstery, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners or solvents.
- Cleaning the Metal Parts: Wipe the chrome metal structure with a soft, dry cloth. Do not use harsh chemicals.
- Caster Maintenance: Periodically check casters for hair or debris and clean as needed to ensure smooth rolling.
- Tighten Fasteners: Occasionally check and tighten all screws and bolts to ensure stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height. | Gas lift cylinder not properly engaged or faulty. | Ensure the lever is fully pulled. If issue persists, contact support. |
| Chair wobbles. | Loose screws or uneven floor. | Tighten all assembly screws. Move chair to a flat surface. |
| Casters do not roll smoothly. | Debris caught in casters. | Clean casters, removing any hair or lint. |
Specifications
- Brand: Connubia
- Model: New York CB624
- Color: White (Ekos G8K)
- Frame Material: Metal (P77 Chromed)
- Upholstery: Padded seat and backrest, Ekos White
- Special Features: Height adjustable, Swivel, Upholstered in leatherette (Ekos)
- Product Dimensions: 63 cm (Depth) x 65 cm (Width) x 87 cm (Height)
Image: Diagram showing the dimensions of the Connubia New York CB624 chair: 87cm height, 63cm depth, and 65cm width.
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Connubia website. Keep your proof of purchase for any warranty claims.
For further assistance, you may contact your retailer or the manufacturer directly.