Luxell M7-50BTF(FLAT 70) 5-Burner 70cm Built-in Stainless Steel Gas Hob

1. Introduction and Safety Information

Thank you for choosing the Luxell M7-50BTF(FLAT 70) Gas Hob. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read it thoroughly before use and keep it for future reference.

Important Safety Warnings:

• Installation: This appliance must be installed by a qualified and authorized technician in accordance with local regulations and standards. Incorrect installation can lead to gas leaks, electric shock, or fire.
• Gas Safety: Ensure adequate ventilation in the kitchen when the gas hob is in use. Do not store flammable materials near the appliance. If you smell gas, immediately turn off the gas supply, open windows, and do not operate any electrical switches or appliances. Contact a qualified technician.
• Hot Surfaces: The hob surface and cooking zones become very hot during and after use. Avoid touching hot surfaces. Use oven mitts or pot holders.
• Children and Pets: Keep children and pets away from the appliance during operation and while it is cooling down. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Cleaning: Always disconnect the appliance from the power supply and ensure it has cooled down before cleaning.

2. Product Overview

The Luxell M7-50BTF(FLAT 70) is a 70cm built-in gas hob featuring five burners, a durable stainless steel surface, and robust cast iron grids. It is designed for use with LPG (Liquefied Petroleum Gas) and includes valved control knobs for precise flame adjustment and an electronic ignition system for easy startup.

Image 1: Front view of the Luxell M7-50BTF(FLAT 70) 5-Burner Gas Hob. This image shows the stainless steel surface, five gas burners with their respective cast iron grids, and the control knobs located at the front.

Key Features:

• 5 Gas Burners: Provides versatile cooking options with different heat outputs.
• Stainless Steel Surface: Offers durability and ease of cleaning.
• Cast Iron Grids: Provides stable support for cookware and retains heat effectively.
• Valved Control: Allows for precise control over flame intensity for each burner.
• Electronic Ignition: Integrated ignition system for convenient and quick burner lighting.
• LPG Compatibility: Designed for use with LPG gas supply.

3. Setup and Installation

Warning: Installation must be performed by a qualified and certified gas and electrical technician. Failure to comply with safety regulations can result in serious injury or damage.

3.1 Unpacking

1. Carefully remove the hob from its packaging.
2. Check for any damage during transit. If damage is found, do not install the appliance and contact your retailer.
3. Ensure all components are present: hob unit, cast iron grids, burner caps, and instruction manual.

3.2 Countertop Preparation

• The countertop material must be heat-resistant.
• Create a cutout in the countertop according to the dimensions provided in the technical specifications (refer to Section 6). Ensure sufficient clearance around the hob for ventilation.
• Apply the supplied sealing gasket around the edge of the cutout to prevent liquid ingress.

3.3 Gas Connection

• This appliance is configured for LPG. Ensure your gas supply matches this type.
• Connect the hob to the gas supply using a flexible or rigid pipe approved for gas appliances, following local regulations.
• Perform a leak test on all connections using soapy water. Do not use an open flame.

3.4 Electrical Connection

• The hob requires an electrical connection for the electronic ignition system.
• Connect the appliance to a properly grounded electrical outlet, ensuring the voltage and frequency match the appliance's requirements (typically 220-240V, 50/60Hz).
• Ensure the electrical circuit is protected by an appropriate fuse or circuit breaker.

3.5 Ventilation

Adequate ventilation is crucial for the safe operation of gas appliances. Ensure your kitchen has proper airflow, possibly through an extractor hood or open windows, especially when the hob is in use.

4. Operating Instructions

4.1 Before First Use

• Remove all protective films and packaging materials from the hob surface and burners.
• Clean the hob surface with a damp cloth.
• Place the burner caps and cast iron grids correctly on their respective positions.

4.2 Igniting a Burner

1. Ensure the gas supply is open.
2. Place appropriate cookware on the desired burner's cast iron grid.
3. Push down the control knob for the desired burner and turn it counter-clockwise to the maximum flame position (large flame symbol).
4. Hold the knob down for a few seconds until the flame ignites. The electronic ignition will automatically spark.
5. Once the flame is stable, release the knob. If the flame extinguishes, repeat the process.

4.3 Adjusting the Flame

• After ignition, you can adjust the flame intensity by turning the control knob between the maximum and minimum flame positions (large and small flame symbols).
• Do not turn the knob past the minimum flame position, as this will extinguish the flame.

4.4 Turning Off a Burner

To turn off a burner, turn the control knob clockwise until it reaches the 'off' position (dot symbol). Ensure the flame is completely extinguished.

4.5 Using Cookware

• Use cookware with a flat base that is appropriate for the size of the burner.
• Ensure the flame does not extend beyond the base of the pot, as this wastes energy and can damage the cookware handles.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and efficient operation of your hob. Always ensure the appliance is cool and disconnected from the power supply before cleaning.

5.1 Cleaning the Stainless Steel Surface

• Use a soft cloth or sponge with warm soapy water.
• For stubborn stains, use a non-abrasive stainless steel cleaner.
• Always wipe in the direction of the grain of the stainless steel.
• Rinse thoroughly and dry with a clean, soft cloth to prevent water spots.
• Do not use abrasive cleaners, scouring pads, or harsh chemicals as they can scratch or damage the surface.

5.2 Cleaning Burner Components

• Remove the cast iron grids, burner caps, and burner crowns.
• Wash these components in warm soapy water. For stubborn food residues, soak them before cleaning.
• Ensure all parts are completely dry before reassembling them. Moisture can interfere with ignition.
• Clean the ignition electrodes and thermocouple (if visible) gently with a small brush to remove any food debris.

5.3 Cast Iron Grids

• The cast iron grids can be cleaned with warm soapy water.
• For baked-on food, a stiff brush can be used.
• Ensure they are thoroughly dried to prevent rust.

5.4 Regular Checks

• Periodically check the gas hose for any signs of wear or damage. Replace if necessary.
• Have the gas connections checked by a qualified technician annually.

6. Troubleshooting

Before contacting technical support, please refer to the following table for common issues and their solutions.

If the problem persists after attempting these solutions, please contact a qualified service technician.

7. Technical Specifications

8. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

For technical assistance, spare parts, or service requests, please contact the retailer or the authorized Luxell service center in your region. Always provide the model number (M7-50BTF) and serial number (if available) when seeking support.