Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Troy Lighting Soren B8903-TBZH 3-Light Outdoor Wall Mount. Please read this manual thoroughly before beginning installation and retain it for future reference.
The Soren outdoor wall mount features a classic lantern silhouette, designed for transitional styles. It is constructed from durable EPM material, resistant to UV and salt exposure, ensuring longevity in outdoor environments. This fixture is designed to accommodate three incandescent bulbs.
Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- This fixture is intended for outdoor use. Ensure the mounting surface is structurally sound.
- Do not exceed the maximum wattage specified for the bulbs (60 watts per bulb).
- Wear safety glasses and gloves during installation.
- Ensure the fixture is properly grounded.
Package Contents
Verify that all components are present before beginning installation:
- Fixture Body (1)
- Mounting Hardware (1 set)
- Glass Panels (pre-installed or separate, check packaging)
- Instruction Manual (this document)
Note: Bulbs are not included and must be purchased separately.
Setup and Installation
- Prepare for Installation:
- Turn off power at the main circuit breaker or fuse box.
- Carefully unpack the fixture and its components. Lay out all parts on a clean, flat surface.
- Review the included mounting hardware.
- Attach Mounting Plate:
Secure the mounting plate (part of the mounting hardware) to the junction box using the provided screws. Ensure the plate is flush against the wall.
- Make Electrical Connections:
- Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green).
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Secure all connections with wire nuts and wrap with electrical tape for added safety.
- Mount the Fixture:
Carefully align the fixture body with the mounting plate and secure it using the provided screws or nuts. Ensure the fixture is firmly attached to the wall.
Image: Front view of the Troy Lighting Soren B8903-TBZH outdoor wall mount, showcasing its bronze finish and clear glass panels.
- Install Bulbs:
Insert three incandescent bulbs (max 60 watts each) into the sockets. Do not overtighten.
- Restore Power:
Once installation is complete, restore power at the circuit breaker or fuse box and test the fixture.
Image: Diagram showing the dimensions of the Troy Lighting Soren B8903-TBZH outdoor wall mount: 23 inches tall, 11 inches wide, and 11 inches deep.
Operating Instructions
The Troy Lighting Soren B8903-TBZH outdoor wall mount operates via a standard wall switch connected to its electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.
- Ensure the power supply is active before attempting to operate the light.
- This fixture is designed for continuous outdoor use.
Maintenance
- Cleaning:
To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
- Bulb Replacement:
Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching. Unscrew old bulbs and replace with new incandescent bulbs (max 60 watts each). Ensure bulbs are securely seated in their sockets.
- Periodic Inspection:
Periodically check the fixture for any signs of wear, loose connections, or damage. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Fixture hums. |
|
|
If troubleshooting steps do not resolve the issue, consult a qualified electrician or contact customer support.
Specifications
- Model: B8903-TBZH Soren
- Brand: Troy Lighting
- Finish: Bronze
- Glass: Clear
- Material: Aluminum, Stainless Steel
- Dimensions (Overall): 11" L x 11" W x 23" H
- Back Plate Dimensions: 6" W x 10" L
- Light Source Type: Incandescent
- Number of Lights: 3
- Max Wattage per Bulb: 60 Watts
- Voltage: 120 Volts
- Indoor/Outdoor Usage: Outdoor
- Mounting Type: Protruding
- Included Components: Mounting Hardware
- Certifications: UL Listed
- Item Weight: 9 Pounds
- UPC: 782042405431
Warranty
This Troy Lighting fixture is covered by a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear. For warranty claims, please retain your proof of purchase and contact Troy Lighting customer support.
Support
For technical assistance, missing parts, or warranty inquiries, please contact Troy Lighting customer support. Refer to the official Troy Lighting website for the most current contact information.
Website: www.troy-lighting.com
When contacting support, please have your model number (B8903-TBZH) and proof of purchase readily available.
