1. Introduction
The Dongar Dashcam Power Adapter provides a clean, plug-and-play power solution for your dashcam or other USB-powered devices by utilizing the existing wiring in your vehicle's rearview mirror. This adapter eliminates the need for messy cables running from the cigarette lighter or fuse box, offering a factory-installed appearance.
Image: The Dongar Dashcam Power Adapter (10-pin Type H) unit.
2. What's in the Box
Your Dongar Dashcam Power Adapter kit includes the following components:
- One (1) Dongar Dash Cam Power Adapter with built-in USB module and 10-pin Type H harness.
- One (1) short USB-C cable for powering modern dash cams.
- Pry tool for installation.
Image: The Dongar Dashcam Power Adapter, 10-pin Type H harness, and included USB-C cable.
3. Vehicle Compatibility
This adapter is designed for select Hyundai and Kia models. It requires an auto-dimming or powered rearview mirror (e.g., mirrors with garage buttons). The adapter is not compatible with Hyundai Ioniq 5, EV6, or vehicles equipped with digital mirrors.
To confirm compatibility, please refer to the detailed compatibility charts below. If your vehicle is not listed, you can compare your mirror's wiring connector to the product photos to ensure the pin layout matches the adapter.
3.1. Hyundai Compatibility Chart
Image: Hyundai 10-pin Type H Compatibility Chart (Part 1 of 2), listing models, trims, and years.
Image: Hyundai 10-pin Type H Compatibility Chart (Part 2 of 2), listing additional models, trims, and years.
3.2. Kia Compatibility Chart
Image: Kia 10-pin Type H Compatibility Chart (Part 1 of 4), listing models, trims, and years.
Image: Kia 10-pin Type H Compatibility Chart (Part 2 of 4), listing additional models, trims, and years.
Image: Kia 10-pin Type H Compatibility Chart (Part 3 of 4), listing additional models, trims, and years.
Image: Kia 10-pin Type H Compatibility Chart (Part 4 of 4), listing additional models, trims, and years.
4. Setup and Installation
The Dongar Dashcam Power Adapter is designed for a fast and easy plug-and-play installation. No permanent modifications to your vehicle's wiring are required.
- Locate Rearview Mirror Wiring: Carefully remove the plastic cover or shroud around your rearview mirror arm to expose the wiring harness. Use the included pry tool to avoid damaging trim.
- Disconnect Original Connector: Disconnect the existing wiring connector from the rearview mirror.
- Connect Dongar Adapter: Plug the vehicle's original wiring connector into one end of the Dongar adapter's 10-pin Type H harness. Then, plug the other end of the Dongar adapter's harness into the rearview mirror.
- Secure Adapter: Use the included adhesive tape to mount the adapter in a discreet location, such as behind the rearview mirror or within the headliner. Ensure it is secure and does not obstruct your view.
- Connect Dashcam: Plug your dashcam's USB-C power cable into the USB-C port on the Dongar adapter.
- Replace Cover: Carefully reattach the plastic cover or shroud around the rearview mirror. Ensure all wires are neatly tucked away for a clean, factory-installed look.
Image: Illustration of connecting the Dongar adapter during installation.
Image: A dashcam connected to the Dongar adapter, showing a clean installation.
5. Operating Instructions
The Dongar Dashcam Power Adapter is designed for simple, automatic operation:
- Automatic Power On/Off: The adapter powers your dashcam or accessory only when the vehicle's ignition is ON. This prevents battery drain when the vehicle is off.
- No Parking Mode: This adapter is not designed for parking mode or constant power applications. For continuous power, a separate hardwiring kit connected to the fuse box would be required.
- Device Compatibility: The adapter converts vehicle power to USB-C, providing reliable power for USB-powered dashcams (e.g., Garmin Mini 2, Mini 3, Live, 47, 57, 67W, Vantrue N2 Pro, N4, N5, Fitcam) and other USB-powered devices like radar detectors and GPS units.
Image: A dashcam discreetly installed and powered by the Dongar adapter.
6. Specifications
| Compatible Devices | USB-powered dash cams, radar detectors, GPS |
| Connector Type | USB Type C |
| Input Voltage | DC 12–24V ±2A Max |
| Output | 5V±3A, 9V±2A, 12V±1.5A (18W max) |
| Power Plug Type | 10-pin Type H |
| Item Dimensions (L x W x H) | 6 x 3 x 1.5 inches |
| Item Weight | 2.88 ounces |
| Manufacturer | Dongar Technologies |
7. Troubleshooting
- Device not powering on:
- Ensure your vehicle's ignition is ON. The adapter only provides power when the ignition is active.
- Verify that your rearview mirror is auto-dimming or powered. The adapter relies on power from the mirror's wiring.
- Check all connections to ensure they are secure and fully seated.
- Confirm your dashcam or device is compatible with USB-C power and the adapter's output specifications.
- Adapter does not fit:
- Double-check your vehicle's make, model, year, and trim against the compatibility charts in Section 3.
- Visually inspect the wiring connector behind your rearview mirror and compare it to the 10-pin Type H connector on the Dongar adapter.
- Intermittent power:
- Ensure the adapter and dashcam cables are not loose.
- Verify that the adapter is securely mounted and not subject to excessive movement.
8. Maintenance
The Dongar Dashcam Power Adapter requires minimal maintenance:
- Cleaning: Keep the adapter and its connections free from dust and debris. Use a soft, dry cloth for cleaning.
- Environmental Conditions: Avoid exposing the adapter to extreme temperatures or excessive moisture.
- Cable Inspection: Periodically check the USB-C cable and the adapter's harness for any signs of wear or damage. Replace if necessary.