Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Targetti Zeno Large LED Projector (Model 1T5393EL). Please read these instructions carefully before installation and retain them for future reference.
Safety Instructions
WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Disconnect power before installation, maintenance, or cleaning.
- Ensure the supply voltage matches the luminaire's requirements (230V).
- Do not operate the luminaire with damaged parts.
- Avoid direct eye exposure to the light source.
- This product is designed for indoor use (IP40). Do not expose to moisture or extreme temperatures.
Product Overview
The Targetti Zeno Large LED Projector is a high-performance 54W LED luminaire designed for single-phase track systems with 3-circuit control. It features a 3000K color temperature, 4078 lumens output, and a 52° beam angle, making it suitable for various indoor lighting applications.
Image: Front view of the Targetti Zeno Large LED Projector, showing the LED light source and reflector within its white housing.
Setup and Installation
- Preparation: Ensure the power supply to the track system is turned off at the circuit breaker.
- Track Compatibility: Verify that the existing track system is a compatible single-phase, 3-circuit track.
- Mounting: Align the projector's track adapter with the track slot. Insert the adapter into the track and rotate the locking lever (if present) to secure the projector in place.
- Electrical Connection: The projector is designed to make electrical contact automatically when properly seated in the track. Ensure a firm connection.
- Circuit Selection: If your track system supports multiple circuits, ensure the projector is set to the desired circuit (refer to track system documentation for circuit selection methods, if applicable on the projector itself).
- Positioning: Adjust the projector's angle and rotation to direct the light as required.
- Power On: Restore power to the track system.
Operating Instructions
Once installed and powered, the Targetti Zeno Large LED Projector operates immediately. Control of the luminaire (on/off) is typically managed via the wall switch connected to the track system. For 3-circuit track systems, individual circuits can be switched independently, allowing for flexible lighting control.
- Turning On/Off: Use the wall switch connected to the track circuit where the projector is installed.
- Adjusting Light Direction: Manually pivot and rotate the projector head to achieve the desired illumination angle.
Maintenance
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior of the luminaire. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the luminaire and track connection for any signs of damage or loose connections.
- LED Module: The LED module is designed for long life and is not user-replaceable. Do not attempt to open the sealed optical compartment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Luminaire does not light up. | No power to the track; Loose connection; Faulty luminaire. | Check circuit breaker. Ensure projector is securely seated in the track. Contact qualified electrician if problem persists. |
| Light flickers. | Loose connection; Incompatible dimmer (if applicable). | Ensure projector is securely seated. This model is not specified as dimmable; avoid using with non-compatible dimmers. |
| Luminaire is hot to touch. | Normal operation (LEDs generate heat); Poor ventilation. | Some heat is normal. Ensure adequate airflow around the luminaire. Do not cover. |
Specifications
- Brand: Targetti
- Model: 1T5393EL (Zeno Large)
- Power: 54W LED
- Color Temperature: 3000K
- Luminous Flux: 4078 lm
- Beam Angle: 52°
- Voltage: 230V
- Ingress Protection (IP) Rating: IP40
- Diameter: Ø 184mm
- Track Type: Single-phase, 3-circuit compatible
- Manufacturer Reference: TAR1T5393EL
- ASIN: B09RQ1WQ7K
Image: Technical drawing showing the dimensions of the Targetti Zeno Large LED Projector, including its diameter (184mm), height (268.5mm), and base width (146mm).
Warranty and Support
For warranty information and technical support, please contact your authorized Targetti dealer or visit the official Targetti website. Please have your model number (1T5393EL) and purchase details available when seeking support.
Note: Information regarding spare parts availability and software updates is not provided with this product.
