Fresh 'n Rebel Twins 3

Fresh 'n Rebel Twins 3 True Wireless Earphones User Manual

Model: Twins 3

Introduction

Welcome to your Fresh 'n Rebel Twins 3 True Wireless Earphones user manual. These earphones are designed to provide a seamless audio experience with crystal clear calls, wireless freedom, and intuitive touch controls. This manual will guide you through the setup, operation, and maintenance of your Twins 3 earphones.

Package Contents

Ensure all items are present in your package:

  • Fresh 'n Rebel Twins 3 True Wireless Earphones
  • Charging Box
  • USB to USB-C Charging Cable
  • 3 Sizes of Soft Silicone Eartips (S, M, L)
  • Quick Start Guide
Image showing Fresh 'n Rebel Twins 3 earphones, charging case, USB-C cable, and eartips, illustrating package contents.

Figure 1: What's in the Box - Twins 3 Earphones, Charging Box, USB-C Cable, and Eartips.

Getting Started

1. Charging the Earphones and Case

Before first use, fully charge your Twins 3 earphones and charging case. The charging case supports both wired and wireless charging.

  • Wired Charging: Connect the included USB-C cable to the charging port on the case and to a USB power source.
  • Wireless Charging: Place the charging case on a Qi-compatible wireless charging pad.

A full charge takes approximately 1.5 hours. The earphones provide up to 6 hours of playtime on a single charge, with the charging case extending total playtime to 27 hours.

Image of Fresh 'n Rebel Twins 3 earphones in their charging case, indicating charging status.

Figure 2: Twins 3 Earphones in Charging Case.

2. Powering On/Off

  • Power On: Open the charging case, and the earphones will automatically power on.
  • Power Off: Place the earphones back into the charging case and close the lid. They will automatically power off and begin charging.

3. Bluetooth Pairing

To connect your Twins 3 earphones to a device:

  1. Ensure the earphones are charged and inside the charging case.
  2. Open the charging case. The earphones will enter pairing mode, indicated by a flashing LED light.
  3. On your device (smartphone, tablet, laptop), go to Bluetooth settings and select "Twins 3" from the list of available devices.
  4. Once connected, you will hear a confirmation tone, and the LED light on the earphones will stop flashing.

The Twins 3 feature automatic pairing; once paired with a device, they will automatically connect when taken out of the case and the device's Bluetooth is active.

Using Your Earphones

1. Touch Controls

The Twins 3 earphones feature intuitive touch controls on the side of each earbud. Tap the earbud to manage music playback and calls without needing to access your phone.

  • Play/Pause: Single tap on either earbud.
  • Next Track: Double tap on the right earbud.
  • Previous Track: Double tap on the left earbud.
  • Answer/End Call: Single tap on either earbud.
  • Reject Call: Press and hold either earbud.
  • Activate Voice Assistant: Triple tap on either earbud.
Diagram illustrating touch control gestures on the Fresh 'n Rebel Twins 3 earbud for music and call management, and voice assistant activation.

Figure 3: Touch Control Functions.

2. Making Calls with Environmental Noise Cancellation (ENC)

The Twins 3 earphones are equipped with improved microphones and Environmental Noise Cancellation (ENC) technology. ENC filters out ambient noise during calls, ensuring your voice is clearer and conversations are undisturbed.

Image of a person wearing Fresh 'n Rebel Twins 3 earphones, with sound wave graphics indicating clear call quality due to ENC.

Figure 4: Clear Calls with ENC.

3. In-Ear Detection

The earphones feature in-ear detection sensors. Music playback will automatically pause when you remove an earbud and resume when you place it back in your ear.

4. Water Resistance (IPX4)

With an IPX4 splash-proof rating, your Twins 3 earphones are resistant to splashes of water from any direction. This makes them suitable for use during workouts or on rainy days. Note: The earphones are splash-proof, not waterproof. Do not submerge them in water.

5. High Quality Audio

Experience clear sound and deep bass thanks to the 13mm dynamic drivers. Enjoy your favorite audio content with enhanced sound quality.

Image of a person wearing Fresh 'n Rebel Twins 3 earphones, with sound waves emanating from the earbud, highlighting high-quality audio.

Figure 5: High Quality Audio with 13mm Drivers.

Care and Maintenance

  • Cleaning: Regularly clean the earphones and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
  • Eartips: Remove the silicone eartips and clean them with water if necessary. Ensure they are completely dry before reattaching.
  • Storage: When not in use, store the earphones in their charging case to protect them and keep them charged. Avoid extreme temperatures.
  • Water Exposure: If the earphones get wet, wipe them dry thoroughly before placing them back in the charging case to prevent damage.

Troubleshooting

ProblemSolution
Earphones not pairing
  • Ensure earphones are charged.
  • Place earphones back in the case, close, then open again to re-enter pairing mode.
  • Turn off and on Bluetooth on your device.
  • Forget "Twins 3" from your device's Bluetooth list and try pairing again.
No sound from one earbud
  • Ensure both earbuds are charged.
  • Place both earbuds back in the charging case, close the lid, then open it again.
  • Try re-pairing the earphones with your device.
Earphones not charging
  • Ensure the charging cable is securely connected to both the case and the power source.
  • Check if the wireless charging pad is functioning correctly and the case is properly aligned.
  • Clean the charging contacts on the earphones and inside the case with a dry cotton swab.
Poor call quality
  • Ensure the microphones are not obstructed.
  • Move to a quieter environment if possible, as ENC works best on consistent background noise.
  • Ensure the earphones are fully charged.

Specifications

  • Model Name: Twins 3
  • Brand: Fresh 'n Rebel
  • Connectivity: Bluetooth Wireless
  • Drivers: 13mm Dynamic
  • Playtime (Earphones): Up to 6 hours
  • Total Playtime (with Charging Case): Up to 27 hours
  • Charging Time: Approx. 1.5 hours
  • Charging Port: USB-C
  • Wireless Charging: Qi-compatible
  • Water Resistance: IPX4 (Splash-proof)
  • Noise Control: Environmental Noise Cancellation (ENC) for calls
  • Control Method: Touch Control, Voice Control
  • Features: In-ear detection, Automatic Pairing, Dual Master
  • Compatible Devices: Smartphones, Tablets, Laptops, Desktops
  • Product Dimensions: 4.4 x 2.8 x 6 cm (Charging Case)
  • Weight: 110 g
  • Material: Plastic

Warranty and Support

Fresh 'n Rebel products come with a standard manufacturer's warranty. For detailed warranty information, product support, or to register your product, please visit the official Fresh 'n Rebel website or contact their customer service. Keep your proof of purchase for warranty claims.

For further assistance, please refer to the contact information provided in your Quick Start Guide or on the Fresh 'n Rebel official support page.

© 2024 Fresh 'n Rebel. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.