Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bandai Shokugan Modeling Project (SMP) GaoKnight Model Kit from Hyakuju Sentai Gaoranger. The GaoKnight is a powerful combination of six distinct Power Animals: an Eagle, a Shark, a Bison, a Tiger, an Elephant, and Kong. This kit allows you to construct each Power Animal individually and then combine them to form the mighty GaoKnight figure.
Safety Information
- Age Recommendation: This product is intended for individuals aged 15 months and older.
- Small Parts: The kit contains small parts which may pose a choking hazard. Keep out of reach of young children.
- Sharp Edges: Exercise caution during assembly as some parts may have sharp edges.
- Ventilation: Assemble in a well-ventilated area.
- Material Handling: Avoid placing plastic parts near heat sources or in direct sunlight for extended periods to prevent deformation.
Package Contents
Your Bandai SMP GaoKnight Model Kit includes the following components:
- Model kit parts for GaoEagle
- Model kit parts for GaoShark
- Model kit parts for GaoBison
- Model kit parts for GaoTiger
- Model kit parts for GaoElephant
- Model kit parts for GaoKong
- Instruction booklet (this document)
Please verify all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Setup (Assembly)
The GaoKnight model kit requires assembly. Follow the detailed diagrams and step-by-step instructions provided in the included physical instruction booklet for each Power Animal. The general process involves:
- Part Identification: Carefully identify all parts for each Power Animal from the runners.
- Cutting Parts: Use a hobby nipper to carefully cut parts from the runners. Avoid pulling or twisting parts to prevent damage.
- Assembly: Follow the numerical sequence in the physical manual to connect parts. Ensure proper alignment and secure connections.
- Decals/Stickers: Apply any included decals or stickers as indicated in the manual for enhanced detail.
Combining into GaoKnight
Once all six Power Animals are assembled, they can be combined to form GaoKnight. Refer to the specific combination diagrams in the physical instruction booklet. The primary components for GaoKnight are:
- GaoKong forms the main body and head.
- GaoEagle forms the chest armor.
- GaoShark forms one arm.
- GaoTiger forms the other arm.
- GaoBison forms the legs.
- GaoElephant forms the shoulder armor and weapon.
This image displays the fully assembled Bandai SMP GaoKnight model kit. The figure is depicted in a dynamic action pose, highlighting its intricate design and the combination of various Power Animals. Notably, the black elephant head forms a prominent shoulder piece, and a long, segmented tail weapon extends from its arm.
Operating (Transformation and Posing)
The SMP GaoKnight model kit features articulation points allowing for various poses and dynamic displays. Additionally, the individual Power Animals can be reconfigured into different forms or combined with other separately sold SMP Power Animals for new combinations.
- Articulation: Gently manipulate the joints to achieve desired poses. Avoid excessive force to prevent breakage.
- Transformation: To transform GaoKnight back into its individual Power Animal components, reverse the assembly steps.
- Interchangeability: This kit is designed to be compatible with other SMP Power Animal kits (sold separately), allowing for custom combinations. Refer to the respective manuals for specific combination instructions.
Maintenance
Proper care will ensure the longevity and appearance of your model kit.
- Cleaning: Use a soft, dry cloth or a soft brush to gently remove dust. For stubborn dirt, lightly dampen a cloth with water and wipe carefully, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures. Consider a display case to protect it from dust.
- Joint Care: If joints become loose, a small amount of clear nail polish or hobby-grade joint tightener can be applied to the peg and allowed to dry before reassembly. If joints are too tight, carefully sand down the peg slightly.
Troubleshooting
Refer to the table below for common issues and their solutions.
| Issue | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together | Incorrect part orientation; excess plastic from runner; misaligned pegs. | Verify part orientation with the manual. Carefully trim any excess plastic. Gently realign pegs. Do not force parts. |
| Joints are too loose | Wear and tear; manufacturing tolerance. | Apply a thin coat of clear nail polish or hobby-grade joint tightener to the peg and let it dry completely before reassembling. |
| Parts break during assembly | Excessive force; incorrect cutting from runner. | Contact customer support for replacement parts if available. Use appropriate tools and gentle pressure for future assembly. |
Specifications
- Brand: BANDAI
- Model Name: GaoKnight
- Model Number: NON
- Material: Plastic
- Number of Pieces: 6 (referring to the six Power Animals that combine)
- Item Weight: 0.62 Kilograms
- Item Dimensions (L x W x H): Approximately 12 x 12 x 12 inches (assembled GaoKnight)
- Assembly Required: Yes
- Batteries Required: No
- Recommended Age: 15 months and up
Warranty Information
Bandai products are manufactured to high-quality standards. For specific warranty details regarding your SMP GaoKnight Model Kit, please refer to the warranty card included in the product packaging or visit the official Bandai website. Warranty coverage typically addresses manufacturing defects.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Bandai customer support through their official website or the contact information provided in your product packaging. Please have your model number (NON) and proof of purchase ready when contacting support.
Bandai Official Website: www.bandai.com