Wyze Auto-Lock Bolt (Model WLCKB1) Instruction Manual

1. Product Overview

The Wyze Auto-Lock Bolt is a smart deadbolt designed to provide secure and convenient keyless entry to your home. It replaces existing deadbolts and offers multiple access methods, including fingerprint recognition, a backlit keypad, and Bluetooth control via the Wyze app.

Figure 1: Wyze Auto-Lock Bolt exterior keypad and interior unit.

Key Features:

• Fingerprint Unlock: Access your home in approximately 0.5 seconds. Stores up to 50 fingerprints.
• Numbered Keypad: Use custom codes for entry. Features anti-peep technology, allowing random digits before or after your code.
• Wyze App Control: Create codes, store fingerprints, view lock/unlock history, send emergency one-time-use codes, and set auto-lock timers via Bluetooth.
• Auto-Lock: Automatically locks the door after a custom-set amount of time.
• Weatherproof: IPX5 rating for outdoor use.
• BHMA/UL 20-Min Fire Rated: Certified for security and fire safety.

2. Setup and Installation

The Wyze Auto-Lock Bolt is designed for straightforward installation, typically replacing an existing deadbolt in about 20 minutes. Ensure your door's backset, cross bore, and thickness are compatible before beginning.

What's in the Box:

Figure 2: Package Contents. Includes Keypad Assembly, Interior Assembly, 4 AA Batteries, Mounting Plate, and Mounting Parts.

Installation Steps:

1. Remove Existing Deadbolt: Carefully remove your current deadbolt from the door.
2. Install New Deadbolt Latch: Insert the new deadbolt latch into the door edge and secure it with screws. Ensure the latch is oriented correctly.
3. Install Exterior Keypad: Place the exterior keypad assembly onto the door, feeding the connector cable through the door hole.
4. Install Mounting Plate: Secure the interior mounting plate to the door, connecting it to the exterior keypad's screw posts. Ensure the cable is routed correctly.
5. Connect Interior Assembly: Connect the cable from the exterior keypad to the interior assembly.
6. Install Interior Assembly: Mount the interior assembly onto the mounting plate and secure it with screws.
7. Insert Batteries: Open the battery cover on the interior assembly and insert the 4 AA batteries provided.
8. Calibrate Lock: Follow the instructions in the Wyze app to calibrate the lock, ensuring the deadbolt extends and retracts smoothly.

Figure 3: The Wyze Auto-Lock Bolt is designed to replace your existing deadbolt.

3. Operating Instructions

Unlocking and Locking:

• Fingerprint: Place a registered finger on the fingerprint sensor on the exterior keypad. The lock will unlock in under a second.
• Keypad Code: Enter your programmed access code on the backlit keypad, then press the unlock button.
• Anti-Peep Technology: To prevent others from learning your code, you can enter random digits before or after your actual code. The lock will still recognize the correct sequence.
• Wyze App (Bluetooth): Open the Wyze app on your smartphone within Bluetooth range and tap the unlock icon.
• Manual (Interior): From the inside, turn the thumb-turn knob to manually lock or unlock the deadbolt.

Figure 4: Fingerprint unlock for quick access.

Wyze App Features:

The Wyze app serves as your command center for managing the Auto-Lock Bolt. A Bluetooth connection is required for app features.

• View Lock/Unlock History: Monitor who accessed the door, when, and how (fingerprint, code, app), including failed attempts.
• Create Door Codes & Store Fingerprints: Easily add and manage up to 50 fingerprints and multiple access codes for family and guests.
• Emergency One-Time Codes: Generate temporary codes for guests, even remotely without a Bluetooth connection. These codes are single-use and expire within 4 hours.
• Set Auto-Lock Timer: Configure the lock to automatically engage after a specified period (e.g., 15, 30, 60 seconds, 5, or 15 minutes) when unlocked.
• Scheduled Access: Set specific times or days for certain codes or fingerprints to be active.

Figure 5: Wyze App interface for managing your smart lock.

4. Maintenance

Battery Replacement:

The Wyze Auto-Lock Bolt uses 4 AA batteries, which typically last 10-12 months. The Wyze app will notify you when battery levels are low, and the keypad will flash red as an indicator.

1. Open the battery cover on the interior assembly.
2. Remove the old AA batteries.
3. Insert new 4 AA alkaline batteries, ensuring correct polarity.
4. Replace the battery cover.

Emergency Power:

If the batteries die while you are away, a USB-C port is located on the bottom of the exterior keypad. You can use a portable power bank to provide a brief charge, allowing you to enter your access code for entry.

Figure 6: Battery compartment and IPX5 weather resistance.

5. Troubleshooting

• Fingerprint Sensor Not Responding: Ensure your finger is clean and dry. Try re-registering your fingerprint in the Wyze app if issues persist.
• Keypad Not Lighting Up: Check battery levels in the Wyze app or replace batteries if low.
• Lock Not Responding to App: Ensure your smartphone's Bluetooth is enabled and you are within range of the lock. Restart the Wyze app.
• Deadbolt Not Extending/Retracting Smoothly: Recalibrate the lock through the Wyze app. Check for any obstructions in the door frame or strike plate.
• Lost Access Code: Generate a new one-time code or reset your primary code via the Wyze app.
• Lock Jams or Multiple Failed Attempts: The lock has a built-in alarm for such events. Check the lock/unlock history in the app for details.

6. Specifications

7. Warranty and Support

Warranty:

The Wyze Auto-Lock Bolt comes with a 1-year manufacturer's warranty.

Customer Support:

For additional support, troubleshooting, or warranty claims, please visit the official Wyze support website or contact Wyze customer service directly. The Wyze app also provides access to support resources and device information.