Capital Lighting Bradford Outdoor Wall Lantern User Manual

Introduction

Thank you for choosing the Capital Lighting 946411BK Bradford Clear Glass Outdoor Wall Lantern. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Safety Information

Always follow basic safety precautions when installing and operating electrical fixtures to reduce the risk of fire, electric shock, and personal injury.

• WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installing or servicing.
• Consult a qualified electrician if you are not familiar with electrical installations.
• Ensure all connections are secure and correct.
• This fixture is UL Approved for WET Locations, making it suitable for covered porches, porticos, outdoor kitchens, or walkways.
• Do not exceed the maximum wattage specified for the bulb.
• Handle glass components with care to prevent breakage.

Legal Disclaimer: Please check your local laws before purchasing and installing this product.

Package Contents

Verify that all components are present before beginning installation:

• Bradford Outdoor Wall Lantern (Fixture Body with Clear Glass)
• Mounting Hardware (screws, wire nuts, mounting plate)
• Installation Instructions

Note: Bulb(s) and junction box are not included.

Setup and Installation

Follow these steps for proper installation of your outdoor wall lantern.

1. Prepare for Installation: Turn off power at the main circuit breaker or fuse box. Ensure the power is completely off before proceeding.
2. Mounting Plate Installation: Attach the mounting plate to your existing junction box using the provided screws. Ensure the plate is securely fastened.
3. Wiring Connections: Connect the fixture's electrical wires to the corresponding wires from your junction box. Typically, black to black (live), white to white (neutral), and green or bare copper to green or bare copper (ground). Secure connections with wire nuts.
4. Secure the Fixture: Carefully align the fixture body with the mounting plate and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall and stable.
5. Install Bulb: Insert one (1) G25 type bulb with an E26 Medium base, not exceeding 100 Watts, into the fixture's socket.
6. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.

Figure 1: Product Dimensions. The lantern measures 17.25 inches high, 6 inches wide, and 7.5 inches deep. The backplate is 4.75 inches wide by 6.25 inches high by 0.75 inches deep. The outlet box center is 4.75 inches from the top of the fixture.

Figure 2: Installed View. This image shows two Bradford Outdoor Wall Lanterns mounted on an exterior wall, demonstrating their appearance in an outdoor setting.

Operating Instructions

Once installed, the Capital Lighting Bradford Outdoor Wall Lantern operates like any standard outdoor light fixture. Control the light using your existing wall switch or external timer/sensor connected to the circuit.

• Turning On/Off: Use the connected wall switch to turn the light fixture on or off.
• Automatic Operation: If connected to a photocell or motion sensor (sold separately), the light will activate automatically based on ambient light levels or detected movement.

Maintenance

Regular cleaning and proper care will help maintain the appearance and functionality of your outdoor wall lantern.

• Cleaning: To clean the metal and glass surfaces, wipe with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new G25 type bulb (E26 Medium base, max 100 Watts).
• Inspection: Periodically inspect the fixture for any signs of wear, loose connections, or damage. Address any issues promptly.

Troubleshooting

If your outdoor wall lantern is not functioning correctly, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Warranty Information

Capital Lighting offers a 5-Year Manufacturer Warranty against rust and fading for this product. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation provided with your purchase or contact Capital Lighting customer support.

Customer Support

For technical assistance, replacement parts, or warranty inquiries, please contact the authorized seller from whom you purchased this product. Capital Lighting Fixture Company is committed to delivering high-quality products and superior customer assistance through its authorized network.

When purchasing from an authorized reseller, you receive:

• New product shipped in original packaging with all necessary installation and support documents.
• Product support & assistance from qualified and trained authorized sellers.

Capital Lighting Fixture Company does not provide direct product support or service for items purchased from unauthorized resellers.

Figure 3: Authorized Reseller Information. This image highlights the benefits of purchasing from an authorized reseller, including receiving new products with full documentation and access to product support.