Asobu H2 Audio Insulated Water Bottle (Model BT65) - Instruction Manual

Introduction

The Asobu H2 Audio Insulated Water Bottle combines hydration with audio convenience. This 20-ounce stainless steel bottle features double-wall insulation to maintain beverage temperature and integrates two wireless earbuds within its lid, which also serves as a portable charging portal. Designed for active lifestyles, it fits most standard bike or car bottle holders.

Components

• 20 oz Insulated Stainless Steel Water Bottle
• Lid with Integrated Earbud Charging Portal
• Two Wireless Earbuds
• USB Charging Cable (for lid/earbuds)

Setup

1. Initial Charging

Before first use, fully charge the earbud charging portal (lid) and the earbuds. Connect the provided USB cable to the charging port on the lid and a power source. The earbuds will charge automatically when placed inside the lid.

2. Earbud Pairing

1. Remove both earbuds from the charging portal. They should automatically enter pairing mode.
2. On your smartphone or audio device, enable Bluetooth.
3. Search for available devices and select "Asobu H2 Audio" (or similar name) to pair.
4. Once paired, the earbuds are ready for use.

3. Bottle Preparation

Wash the bottle and lid thoroughly before first use. Fill the bottle with your desired beverage. Ensure the lid is securely screwed on to maintain insulation and prevent leaks.

Operating Instructions

Using the Water Bottle

The double-wall insulation keeps beverages hot or cold for extended periods. For best results, pre-heat or pre-chill the bottle with hot or cold water for 5-10 minutes before filling with your drink.

Image: The Asobu H2 Audio Insulated Water Bottle in black, showcasing its sleek design.

Using the Wireless Earbuds

• Power On/Off: Earbuds typically power on automatically when removed from the charging portal and power off when returned.
• Play/Pause: Tap either earbud once to play or pause audio.
• Next/Previous Track: Double-tap the right earbud for the next track, double-tap the left for the previous track. (Note: Specific controls may vary; refer to your device's Bluetooth settings for customization.)
• Answer/End Call: Tap either earbud once to answer or end a call.
• Charging: Place earbuds back into the lid's charging portal to recharge. The lid itself can be recharged via the USB cable.

Image: The two wireless earbuds neatly placed within the charging case, which is integrated into the bottle's lid.

Image: A person wearing the Asobu H2 Audio wireless earbuds, demonstrating their use during an activity, with the water bottle visible.

Maintenance

• Bottle: Hand wash only. Do not place the stainless steel bottle in the dishwasher to preserve its insulation properties and finish.
• Lid/Charging Portal: The lid is dishwasher safe. Ensure all electronic components (earbuds) are removed before washing.
• Earbuds: Wipe clean with a soft, dry cloth. Do not submerge in water.
• Ensure all parts are completely dry before reassembling or charging.

Troubleshooting

• Earbuds not pairing: Ensure earbuds are fully charged and removed from the charging portal. Check your device's Bluetooth settings to ensure it's searching for new devices. Try resetting your device's Bluetooth connection.
• No sound from earbuds: Verify volume levels on both your device and the earbuds. Ensure earbuds are properly seated in your ears.
• Bottle leaking: Check that the lid is securely screwed onto the bottle and that the silicone seal is properly in place and free of debris.
• Beverage not staying hot/cold: Ensure the lid is tightly sealed. For optimal insulation, avoid frequently opening the bottle.

Specifications

Warranty & Support

The Asobu H2 Audio Insulated Water Bottle comes with a Lifetime Warranty. For detailed warranty information, product support, or to contact customer service, please visit the official Asobu website or refer to the contact information provided with your purchase.

You can visit the Asobu store at Asobu Store on Amazon.