VASAGLE UBLH301B01
VASAGLE Laundry Hamper with 3 Removable Bags and Shelf
Model: UBLH301B01
Introduction
Thank you for choosing the VASAGLE Laundry Hamper. This manual provides essential information for the safe assembly, operation, and maintenance of your new laundry hamper. Please read these instructions carefully before assembly and retain them for future reference.

The VASAGLE Laundry Hamper, designed for efficient laundry sorting and storage.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use. Periodically check and tighten fasteners as needed.
- Do not overload the shelf or laundry bags beyond their stated weight capacities. The shelf supports up to 55 lb (25 kg).
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Use the included anti-tip kit to secure the unit to a wall, especially if children or pets are present, to prevent accidental tipping.
- Avoid placing hot items directly on the wooden shelf surface.
Parts List
Please verify that all components listed below are present before beginning assembly.
| Component | Quantity |
|---|---|
| Laundry Hamper Frame (Steel) | 1 |
| Top Shelf (MDF) | 1 |
| Oxford Fabric Bags | 3 |
| Anti-Tip Kit | 2 |
| Accessory Bag (Screws, Allen Key, etc.) | 1 |
| Instructions Manual | 1 |

Exploded view of the laundry hamper components for easy identification.
Setup and Assembly
Follow these steps to assemble your VASAGLE Laundry Hamper. Assembly typically takes about 15-30 minutes.
- Unpack and Identify: Carefully unpack all components and compare them with the parts list to ensure nothing is missing.
- Assemble the Frame: Connect the metal frame pieces using the provided screws and Allen key. Ensure all connections are snug but do not overtighten initially.
- Attach Support Bars: Secure the horizontal support bars to the lower section of the frame. These bars will support the laundry bags.
- Install the Top Shelf: Place the MDF top shelf onto the upper part of the metal frame and secure it with the designated screws.
- Insert Laundry Bags: Each Oxford fabric bag has a plastic panel at the bottom for support. Insert the bags into their respective compartments within the frame. The bags attach to the metal frame using hook-and-loop fasteners.
- Adjust Feet: The hamper is equipped with 4 adjustable feet. Turn them to level the unit on uneven floors, ensuring stability.
- Secure with Anti-Tip Kit: For added safety, attach the anti-tip kit to the back of the hamper and secure it to a wall according to the instructions provided with the kit.

Adjustable feet allow for leveling on uneven surfaces.
Operating Instructions
The VASAGLE Laundry Hamper is designed for convenient laundry sorting and storage.
- Sorting Laundry: Utilize the three separate compartments to sort laundry by color, fabric type, or other preferences. Each bag has a capacity of approximately 10.6 gallons (38 L).
- Using the Top Shelf: The rustic brown top shelf provides an additional surface for organizing laundry essentials, folded clothes, or decorative items. Its slatted design promotes airflow.
- Removing Bags: The fabric bags are designed to be easily pulled out from the frame. They are secured with hook-and-loop fasteners, allowing for quick removal and transport to your washing machine.

Three compartments facilitate easy sorting of laundry.

The removable bags are easy to carry for laundry day.
Maintenance
- Frame and Shelf: Wipe the metal frame and MDF shelf with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Fabric Bags: The Oxford fabric bags are water-resistant and designed to be washable. Remove them from the frame and hand wash or machine wash on a gentle cycle with cold water. Air dry only; do not tumble dry. Ensure bags are completely dry before reinserting to prevent mildew.
- Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Tighten if necessary.

Hook-and-loop fasteners allow for easy removal and washing of the fabric bags.
Troubleshooting
- Unit is Wobbly: Check that all screws are tightened. Adjust the leveling feet on the bottom of the frame to stabilize the unit on uneven surfaces.
- Bags Sagging: Ensure the plastic panel at the bottom of each bag is correctly inserted and positioned to provide adequate support.
- Difficulty Removing Bags: Ensure the hook-and-loop fasteners are fully disengaged before attempting to pull out the bags.
- Chemical Odor from Bags: If a new product has a slight odor, air out the bags in a well-ventilated area for a few days before use.
Specifications
| Feature | Detail |
|---|---|
| Model Number | UBLH301B01 |
| Product Dimensions | 36.4"L x 13"W x 28.4"H (92.5 cm x 33 cm x 72 cm) |
| Material | MDF (Medium Density Fiberboard), Steel, Oxford Fabric |
| Color | Black + Rustic Brown |
| Number of Compartments | 3 |
| Bag Capacity (Each) | 10.6 Gallons (38 L) |
| Total Capacity | 31.7 Gallons (120 L) |
| Max. Static Load Capacity (Shelf) | 55 lb (25 kg) |
| Item Weight | 17.9 Pounds (8.1 kg) |
| Included Components | 1 x Laundry Hamper, 2 x Anti-Tip Kit, 1 x Accessory Bag, 1 x Instructions |

Detailed dimensions and load capacities of the laundry hamper.
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official VASAGLE website. Please have your model number (UBLH301B01) and purchase date ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.