Saviland 16W Mini UV/LED Nail Lamp Instruction Manual

1. Product Overview

The Saviland 16W Mini UV/LED Nail Lamp is a compact and portable device designed for curing various gel nail products. Its one-finger design and 180° opening ensure even curing without dead zones, suitable for both long and short nails. This lamp utilizes dual UV and LED light sources, providing efficient and safe curing for at-home or on-the-go nail art applications.

Figure 1: Saviland 16W Mini UV/LED Nail Lamp in operation.

Key Features:

• Portable One-Finger Design: Compact and easy to carry, allowing for nail art creation anywhere. Designed to cure one finger at a time, ensuring even light distribution.
• 180° Opening Design: Provides a wide opening for flexible nail insertion, accommodating various nail lengths and types.
• Powerful and Efficient: 16W dual UV/LED light source supports various gel types including nail glue gel, builder nail gel, painting gel, and gel nail polish.
• Safe for Nails and Skin: Engineered with dual light sources to prevent harm to eyes and skin. Made from non-toxic, durable materials.
• Versatility: Compatible with a wide range of gel polish brands and types.

2. Setup

Before first use, ensure the device is fully charged or connected to a power source.

1. Unpack the Saviland Mini Nail Lamp and its USB charging cable.
2. Connect the USB cable to the lamp's charging port.
3. Plug the other end of the USB cable into a compatible power source (e.g., computer, power bank, or wall adapter).
4. The lamp is ready for use once connected.

Figure 2: Connecting the Saviland Mini UV/LED Nail Lamp to a power source.

3. Operating Instructions

Follow these steps for effective gel nail curing:

1. Prepare Your Nail: File and clean your nail surface.
2. Apply Gel Product: Apply your desired gel polish, glue gel, or builder gel to your nail.
3. Position Finger: Insert your finger into the lamp, ensuring the gel-covered part is fully exposed to the light. The 180° opening allows for flexible positioning.
4. Activate Lamp: Press the power button located on the top of the lamp. The default timing is 60 seconds.
5. Curing Time:
   • For gel nail polish, glue gel, or base nail coat: Cure for approximately 60 seconds.
   • For builder gel or top coat: Cure for approximately 120 seconds.
6. Automatic Shut-off: The lamp will automatically turn off after the set time (default 60 seconds).
7. Repeat: Repeat the process for each nail as needed.

Figure 3: Step-by-step application and curing process.

Important Notes:

• Ensure the gel product is applied thinly and evenly for optimal curing.
• Avoid direct eye exposure to the UV/LED light.
• The lamp is designed for single-finger curing.

4. Maintenance

• Cleaning: Wipe the lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the lamp in a cool, dry place away from direct sunlight and moisture when not in use.
• Cable Care: Handle the USB charging cable gently to prevent damage. Do not bend or twist it excessively.
• Power Off: Always unplug the lamp when not in use for extended periods.

5. Troubleshooting

• Lamp Not Turning On:
  • Ensure the USB cable is securely connected to both the lamp and the power source.
  • Verify that the power source is active and providing power.
  • Press the power button firmly.
• Gel Not Curing Properly:
  • Check that the gel product is compatible with UV/LED lamps.
  • Ensure the gel layer is not too thick. Apply thinner coats.
  • Verify the curing time is sufficient for the specific gel product (e.g., 60s for polish, 120s for builder gel).
  • Ensure the finger is positioned correctly under the light, with no obstructions.
• Intermittent Operation:
  • Check for loose connections in the USB cable.
  • If using a power bank, ensure it has sufficient charge.

6. Specifications

7. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Saviland customer service directly. Keep your purchase receipt for any warranty claims.