Mr Entertainer WY60D Double Wireless Microphone System User Manual

Introduction

The Mr Entertainer WY60D is a professional-quality dual wireless microphone system, designed for use with various karaoke systems and other audio environments. This system includes two handheld microphones and a mains-powered receiver, featuring individual volume controls for each microphone. This allows for precise audio balancing, especially when integrating with existing audio setups or accommodating different vocal levels from two performers. Constructed from robust plastic, the microphones offer a substantial and comfortable grip, complemented by a contemporary design with a jet-black anti-roll grille and an integrated on/off switch.

What's in the Box

Carefully unpack all components and ensure the following items are present:

• 2 x Handheld Microphones
• 1 x Microphone Receiver Box
• 1 x 3-pin UK Power Adapter
• 1 x Jack/Jack Audio Cable for Microphone
• 1 x Jack/Mini Jack Adapter
• 4 x AA Batteries
• 1 x Red Foam Microphone Cover
• 1 x Yellow Foam Microphone Cover
• 2 x Anti-roll Plastic Grips
• 1 x User Manual

Setup Guide

1. Receiver Setup

1. Connect Power: Plug the 3-pin UK power adapter into the DC 5V input port on the rear of the receiver box. Connect the adapter to a suitable mains power outlet.
2. Connect Audio Output: Use the provided Jack/Jack audio cable to connect the 'BLEND-OUT' port on the receiver to the audio input (e.g., 'MIC IN' or 'AUX IN') of your karaoke machine, mixer, or amplifier. If your device requires a mini-jack input, use the included Jack/Mini Jack adapter.
3. Position Antennas: Ensure the two antennas on the receiver are extended and positioned vertically for optimal signal reception.

2. Microphone Battery Installation

1. Open Battery Compartment: Unscrew the bottom part of each microphone to reveal the battery compartment.
2. Insert Batteries: Insert two AA batteries into each microphone, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Close Compartment: Screw the bottom part back onto the microphone securely.

3. Attaching Foam Covers and Anti-Roll Grips

1. Foam Covers: Gently slide a red or yellow foam cover over the head of each microphone. These help reduce plosives and protect the microphone grille.
2. Anti-Roll Grips: Slide the plastic anti-roll grips onto the microphone body, positioning them near the base of the grille. These prevent the microphones from rolling off flat surfaces.

Operating Instructions

1. Powering On/Off

• Receiver: Press the 'POWER' button on the front panel of the receiver. The power indicator light will illuminate.
• Microphones: Slide the ON/OFF switch located on the body of each microphone to the 'ON' position.

2. Adjusting Volume

• The receiver features individual volume control knobs for 'CH A' and 'CH B'. Rotate these knobs clockwise to increase volume and counter-clockwise to decrease volume.
• Adjust the volume on your connected karaoke machine, mixer, or amplifier as needed to achieve the desired overall sound level.

3. Usage Tips

• For optimal performance, maintain a clear line of sight between the microphones and the receiver.
• Avoid placing the receiver near other wireless devices or large metal objects that may cause interference.
• Hold the microphone approximately 2-6 inches (5-15 cm) from your mouth for best vocal pickup.

Maintenance

1. Cleaning

• Wipe the receiver and microphones with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• The foam microphone covers can be gently hand-washed with mild soap and water, then air-dried completely before reattaching.

2. Battery Care

• Replace batteries when the microphone's performance degrades or if the battery indicator (if present) shows low power.
• Remove batteries from the microphones if they will not be used for an extended period to prevent leakage.

3. Storage

• Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep components in their original packaging or a protective case to prevent damage.

Troubleshooting

1. No Sound Output

• Ensure the receiver is powered on and connected correctly to your audio system.
• Check that the microphones are powered on and have fresh batteries.
• Verify that the volume controls on both the receiver and your audio system are turned up.
• Confirm that the audio cable is securely connected at both ends.

2. Poor Sound Quality / Interference

• Ensure the receiver antennas are fully extended and positioned correctly.
• Move the receiver away from other electronic devices (Wi-Fi routers, cordless phones, microwaves) that may cause interference.
• Check microphone batteries; low batteries can affect sound quality.
• Ensure you are within the specified operating range (up to 30m line of sight).

3. Limited Operating Range

• Ensure there are no obstructions (walls, large furniture, people) between the microphones and the receiver.
• Verify that the receiver antennas are properly positioned.
• Replace microphone batteries if they are low.

4. Microphone Not Powering On

• Check that the batteries are inserted correctly with the proper polarity.
• Replace with new batteries to rule out depleted batteries.
• Ensure the ON/OFF switch is fully in the 'ON' position.

Product Specifications

Support Information

For any technical assistance or inquiries regarding your Mr Entertainer WY60D Double Wireless Microphone System, please contact our UK-based support team. Refer to the contact information provided in your product packaging or on the official Mr Entertainer's Karaoke Collection website.