JOH Mini Trail Camera M1 User Manual

1. Introduction

The JOH Mini Trail Camera M1 is a compact and versatile device designed for wildlife observation, hunting, and security monitoring. It captures high-resolution photos and videos with advanced features like super night vision and a fast trigger speed, ensuring you capture every moment in various outdoor conditions.

This manual provides detailed instructions for setting up, operating, and maintaining your JOH Mini Trail Camera M1.

2. Package Contents

• JOH Mini Trail Camera M1
• Mounting Strap
• USB Cable
• Wall Mount Bracket and Screws
• User Manual (this document)

Note: 4x AA batteries and an SD card (up to 128GB) are required and not included in the package.

Figure 2.1: Package Contents

3. Setup

3.1 Battery and SD Card Installation

1. Open the camera's housing latch.
2. Insert 4x AA batteries into the battery compartment, ensuring correct polarity.
3. Insert a compatible SD card (up to 128GB, Class 10 or higher recommended) into the SD card slot until it clicks into place.
4. Close the camera housing securely.

Figure 3.1: Quick Start Guide for Battery and SD Card Installation

3.2 Mounting the Camera

The camera can be mounted using the provided strap or the wall mount bracket.

• Using the Strap: Thread the mounting strap through the slots on the back of the camera and secure it around a tree or pole.
• Using the Wall Mount: Attach the wall mount bracket to a desired surface using the screws. Then, attach the camera to the bracket using the screw thread at the bottom of the camera.

Figure 3.2: Camera Mounted on a Tree

4. Operating the Camera

4.1 Power On/Off and Mode Selection

Locate the ON/SETUP/OFF switch inside the camera housing.

• OFF: Powers off the camera.
• SETUP: Enters setup mode, allowing you to configure settings and view captured media on the LCD screen.
• ON: Activates the camera for motion-activated recording. The camera will enter monitoring mode after a short delay.

4.2 Basic Settings Configuration

In SETUP mode, use the navigation buttons to adjust settings such as photo resolution, video resolution, trigger interval, PIR sensitivity, and time stamp. Refer to the detailed user manual for a complete list of settings and their functions.

For detailed instructions on navigating the menu and configuring advanced settings, please refer to the official User Manual (PDF).

5. Key Features

5.1 Mini Compact Design

This small trail camera is the size of your palm, measuring 2.95x4.7 inches and weighing 14 ounces. The near-tree texture is designed to be completely concealable, giving you the finest hunting, wildlife observation, and security monitoring experience possible.

Figure 5.1: Compact Size and Comparison

5.2 1080P HD Video & 24MP High-Resolution Photos

The camera features 1080P HD video with audio, and an incredible 24MP still image resolution, providing superb picture quality, clarity, and color reproduction. The LCD color display allows for immediate review of captured media.

Figure 5.2: High-Resolution Imaging

5.3 0.1s Ultra-Fast Trigger Speed

This wildlife camera catches every single second a moving target is identified within the PIR sensor scanning range of up to 50ft/120°, thanks to a phenomenal trigger speed of 0.1 seconds. This ensures you never miss fast-moving subjects.

Figure 5.3: Fast Trigger Speed and Wide Angle

5.4 Crystal-Clear Night Vision

Equipped with 10 automatic infrared LED lights that are invisible to wildlife, this camera provides clear visibility for up to 50ft at night within a 120° detection range. It ensures you capture every detail without disturbing natural behavior.

Figure 5.4: Super Night Vision

5.5 IP66 Waterproof Rating

The camera is capable of withstanding even the harshest weather conditions while still taking stunning photographs, especially on snowy days. Its durable construction ensures longevity in outdoor environments.

Figure 5.5: IP66 Weather Resistance

5.6 Multiple Applications

The JOH Mini Trail Camera M1 is suitable for various applications, including hunting, wildlife monitoring, home security, and farm monitoring.

Figure 5.6: Versatile Applications

5.7 Official Product Videos

6. Maintenance

• Battery Replacement: Replace all 4x AA batteries when the low battery indicator appears on the screen to ensure continuous operation.
• SD Card Management: Regularly check the SD card capacity and transfer or delete files to prevent the card from becoming full. Format the SD card periodically for optimal performance.
• Cleaning: Use a soft, dry cloth to clean the camera lens and housing. Avoid using abrasive cleaners or solvents. Ensure the camera is dry before closing the housing after cleaning.
• Storage: When not in use for extended periods, remove batteries and store the camera in a cool, dry place.

7. Troubleshooting

• Camera not powering on: Check battery installation and ensure batteries are fully charged.
• No images/videos captured: Verify PIR sensitivity settings, check SD card for proper insertion and sufficient space, and ensure the camera is in ON mode.
• Poor image/video quality: Clean the lens. Ensure adequate lighting for night vision.
• Short battery life: Use high-quality alkaline or rechargeable AA batteries. Reduce PIR sensitivity or trigger interval if not necessary.

For more detailed troubleshooting steps, please consult the official User Manual (PDF).

8. Specifications

9. Warranty and Support

JOH is committed to providing high-quality products and professional service. If you have any questions or require assistance with your JOH Mini Trail Camera M1, please do not hesitate to contact our support team.

Contact Support: JOHCAMSupport@proton.me

For further information and detailed instructions, please refer to the official User Manual (PDF).