Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your METEESER Android 11 Double Din Car Stereo. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.
Image: The METEESER Android 11 Car Stereo with a 10.1-inch display integrated into a vehicle's dashboard, showcasing its user interface with various application icons.
Product Features
- Operating System: Android 11
- Memory & Storage: 2GB RAM + 32GB ROM for smooth operation and ample storage.
- Display: 10.1-inch high-definition touch screen (1024 x 600 resolution).
- Connectivity: Built-in WiFi, Bluetooth 4.0, USB.
- Navigation: Integrated GPS for online and offline maps.
- Multimedia: FM/RDS Radio, Mirror Link (iOS/Android), support for various apps.
- Vehicle Integration: Steering Wheel Control (SWC) compatibility, Reversing Camera input.
- Customization: Multiple desktop themes available.
Image: The car stereo display highlighting its 2GB RAM and 32GB ROM specifications, alongside a visual representation of 24 different desktop themes that can be selected by the user.
Installation
Wiring Diagram
Refer to the following diagram for proper wiring connections. Incorrect wiring can damage the unit or your vehicle's electrical system. If you are unsure, consult a professional installer.
Image: A comprehensive wiring diagram illustrating connections for the power cord, speaker outputs (Front L/R, Rear L/R), auto antenna, steering wheel controls (SW1, SW2), reverse input, illumination, ACC, B+, GND, and RCA cables for audio/video input/output, subwoofer, and camera input.
General Installation Steps
- Disconnect Battery: Before starting, disconnect the vehicle's negative battery terminal to prevent electrical shorts.
- Remove Old Unit: Carefully remove your existing car stereo unit.
- Connect Wiring: Match the wires from the new stereo to your vehicle's wiring harness according to the provided wiring diagram. Ensure all connections are secure.
- Install GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield.
- Connect Rear Camera (Optional): If installing the backup camera, route the camera cable to the rear of the vehicle and connect it to the designated input on the stereo.
- Mount New Unit: Secure the METEESER stereo into the dashboard using the provided brackets.
- Reconnect Battery: Reconnect the vehicle's negative battery terminal.
- Test Functionality: Turn on the vehicle and test all functions of the stereo, including audio, radio, GPS, Bluetooth, and camera.
Operating Instructions
Basic Controls
The unit features a 10.1-inch touchscreen for most operations. Physical buttons on the left side provide quick access to common functions such as Reset, Volume, Back, and Home.
Bluetooth Connectivity
Pair your mobile device via Bluetooth for hands-free calling and music playback. The unit supports auto-loading of your phone book.
- Go to the Bluetooth settings on the stereo.
- Enable Bluetooth on your mobile device and search for available devices.
- Select "METEESER" (or similar name) from the list on your phone and confirm pairing.
- Once connected, you can make/receive calls and stream audio.
Image: The car stereo screen displaying the Bluetooth dialing interface with a numeric keypad and options for contacts and call history. Below, the FM radio interface is shown with frequency display and preset station buttons.
GPS Navigation
The unit comes with integrated GPS functionality, supporting both online and offline navigation applications. Ensure the GPS antenna is properly installed for optimal signal reception.
Image: The car stereo display showing a detailed GPS navigation map with route information. Adjacent to it, icons for various navigation and social media applications are visible, along with a screen demonstrating WiFi/Hotspot connection for app downloads and internet browsing.
WiFi/Hotspot Connection
Connect the stereo to a WiFi network or your mobile hotspot to access online features, download apps, and browse the internet.
- Go to Settings > Network & Internet > Wi-Fi.
- Turn on Wi-Fi and select your desired network.
- Enter the password if prompted and connect.
Mirror Link Function
Mirror Link allows you to display your smartphone's screen on the car stereo. iOS devices support one-way projection via WiFi, while Android devices support two-way projection via WiFi or USB.
Image: The car stereo display demonstrating the Mirror Link feature, showing a smartphone screen mirrored onto the larger display. It also illustrates the split-screen function, allowing two applications (e.g., navigation and music player) to be viewed simultaneously.
Split Screen Function
The split-screen feature allows you to run and view two applications simultaneously on the 10.1-inch display, enhancing multitasking capabilities.
FM Radio
Tune into your favorite FM radio stations. The unit supports 18 preset stations for quick access.
- Open the "Radio" application.
- Use the scan function or manual tuning to find stations.
- Press and hold a preset button (P1-P6) to save the current station.
Steering Wheel Controls (SWC)
If your vehicle supports it, you can connect the stereo to your existing steering wheel controls for convenient operation without taking your hands off the wheel. The unit supports up to 12 programmable buttons.
- Access the SWC settings in the stereo's menu.
- Follow the on-screen instructions to program each steering wheel button to the desired function (e.g., Volume+, Next, Mode).
Image: The car stereo screen displaying the interface for mapping steering wheel control buttons to various functions. Below this, a view from a reversing camera is shown, indicating the automatic display when the vehicle is in reverse gear, along with features like 170° wide angle and IP68 waterproof rating.
Reversing Display
When a compatible reversing camera is connected and the vehicle is shifted into reverse gear, the stereo automatically displays the camera feed. The included camera features a 170° wide angle, night vision, HD resolution, and IP68 waterproof rating.
Image: An overhead graphic illustrating a car reversing into a parking spot, with icons highlighting the reversing camera's features: 170° wide angle, night vision, HD display, and IP68 waterproof rating.
Specifications
| Feature | Specification |
|---|---|
| Operating System | Android 11 |
| Display Size | 10.1 Inches |
| Resolution | 1024 x 600 |
| Memory Storage Capacity | 32 GB |
| Connectivity Technology | USB, Wi-Fi |
| Special Features | Bluetooth, Touchscreen, GPS, FM Radio, Mirror Link, SWC |
| Audio Output Mode | Stereo |
| Human Interface Input | Buttons, Microphone, Touchscreen |
| Item Weight | 2.99 pounds |
| Package Dimensions | 11.93 x 8.98 x 3.7 inches |
Package Contents
Verify that all items listed below are included in your package:
Image: A visual representation of the package contents, including the main car stereo unit, power cable, RCA cable, GPS antenna, user manual, rear camera, two USB cables, and mounting brackets.
- METEESER Android 11 Car Stereo Unit
- Power Cable
- RCA Cable
- GPS Antenna
- User Manual
- Rear Camera
- 2 x USB Cables
- Mounting Brackets
Troubleshooting
If you encounter issues with your car stereo, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Unit does not power on | Check power cable connections (B+, ACC, GND). Ensure vehicle's fuse is not blown. |
| No sound | Verify speaker wiring. Check volume settings. Ensure audio source is selected correctly. |
| GPS signal weak or lost | Ensure GPS antenna is mounted in a clear, unobstructed location. Check antenna connection. |
| Bluetooth not connecting | Ensure Bluetooth is enabled on both the stereo and your mobile device. Delete previous pairings and try again. |
| Rear camera not displaying | Check camera power and video signal connections. Ensure the reverse trigger wire is correctly connected. |
| Touchscreen unresponsive | Perform a soft reset using the reset button (usually a small pinhole). If issue persists, contact support. |
For further assistance, please refer to the contact information provided in the warranty section or on the manufacturer's website.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: Periodically check for software updates from the manufacturer to ensure optimal performance and access to new features.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Warranty and Support
This METEESER product is covered by a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or warranty claims, please contact METEESER customer service through the retailer where you purchased the product or visit the official METEESER website for contact information.
When contacting support, please have your product model number (B09PTQP4S4) and purchase date ready.