FIT KING FT-076A Air Compression Leg Massager with Heat User Manual

1. Important Safety Information

Please read all safety instructions carefully before using the FIT KING FT-076A Air Compression Leg Massager with Heat. Failure to follow these instructions may result in injury or damage to the device.

• Do not use the massager directly on broken skin or open wounds.
• Ensure skin is intact and free from irritations before use.
• Consult a physician before use if you have any pre-existing medical conditions, especially:
• Acute pulmonary edema
• Acute thrombophlebitis
• Acute congestive cardiac failure
• Acute infections
• Episodes of pulmonary embolism
• Wounds, lesions, or tumors at or near the site of application
• Where increased venous and lymphatic return is undesirable
• Bone fractures or dislocations at or near the site of application
• Presence of arterial insufficiency
• Do not use while sleeping.
• Keep out of reach of children.
• Unplug the device when not in use and before cleaning.
• Do not operate if the power cord or plug is damaged.

2. Product Overview

The FIT KING FT-076A is an air compression leg massager designed to provide relief and relaxation for the feet and legs. It features air compression massage and heat therapy functions.

Key Features:

• Full Leg Coverage: Upgraded boots design provides 360° coverage for feet, calves, and thighs.
• Air Compression Massage: Features 4+4 large airbags and chambers for sequential compression, simulating kneading and squeezing massage.
• Heat Therapy: 3 levels of heating therapy for the entire lower extremity.
• Built-in Pressure Sensor: Automatically adjusts massage intensity for different leg sizes.
• Digital Handheld Controller: LCD screen displays current modes, intensity, and heating levels.
• Easy to Use: Zipper design for easy application and removal.
• Automatic Shut-off: Device automatically turns off after 20 minutes of continuous use.

Package Contents:

• Massager Sleeves (Pair)
• Handheld Controller
• Power Adapter (DC 12V3A)
• Carrying Bag
• User Manual (this document)

3. Setup and Application

Follow these steps to properly set up and apply the leg massager:

1. Wear the Sleeves: Wrap the massager sleeves around your legs. Ensure the sleeves cover your feet, calves, and thighs. The zippers should be on the outside of your legs.
2. Adjust for Snug Fit: Use the zippers to secure the sleeves. The built-in pressure sensor will adjust the massage intensity, so a snug fit is important for optimal experience.
3. Connect Air Hoses: Ensure both air hoses from the sleeves are securely inserted into the corresponding ports on the handheld controller. If not properly connected, the device will not function.
4. Check "UP" Mark: Verify that the side of the sleeves with the "UP" mark is facing upwards, ensuring correct orientation for the compression chambers.
5. Connect Power: Plug the power adapter into the handheld controller, then plug the adapter into a standard electrical outlet.

4. Operating Instructions

The FIT KING FT-076A is operated using the digital handheld controller with an LCD screen.

1. Power On/Off: Press the Power Button (Select Massage Mode: Press the Mode Button (m) to cycle through the 3 available massage modes:
   • Sequence: Airbags inflate and deflate in a sequential pattern.
   • Circulation: Airbags inflate and deflate to promote circulation.
   • Combination: A combination of different massage patterns.
   The selected mode will be displayed on the LCD screen.
2. Adjust Intensity Level: Press the Intensity Level Button (Activate Heat Therapy: Press the Heat Level Button (Automatic Shut-off: The device will automatically shut off after 20 minutes of operation. You can restart it at any time for continued use.

Note: Due to the 4+4 big chambers, it may take 5-20 seconds for the device to inflate the sleeves after pressing the power button, especially if your feet and legs are smaller.

5. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your FIT KING FT-076A leg massager.

• Cleaning: Disconnect the device from the power source before cleaning. Wipe the exterior of the sleeves and controller with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the massager in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the device.
• Inspection: Regularly inspect the power cord, air hoses, and sleeves for any signs of damage. If any damage is found, discontinue use and contact customer support.

6. Troubleshooting

If you encounter any issues with your FIT KING FT-076A, please refer to the following common troubleshooting steps:

• Device does not power on:
  • Ensure the power adapter is securely plugged into both the controller and a working electrical outlet.
  • Check if the power button on the controller has been pressed.
• No compression or weak compression:
  • Verify that both air hoses are fully inserted into the controller.
  • Ensure the sleeves are properly zipped and snug around your legs.
  • Check the selected intensity level on the LCD screen and increase if necessary.
  • Allow 5-20 seconds for initial inflation, especially if legs are smaller.
• Heat function not working:
  • Ensure the heat level has been selected on the controller (it is off by default).
  • Check the heat level displayed on the LCD screen.
• Device automatically shuts off too soon:
  • The device has a built-in 20-minute auto-off timer for safety. This is normal operation. You can restart the device if further use is desired.

If the problem persists after trying these steps, please contact FIT KING customer support.

7. Specifications

Optimal Size Ranges:

8. Warranty and Support

Warranty information for the FIT KING FT-076A Air Compression Leg Massager with Heat is typically provided with the product packaging or available on the manufacturer's official website.

For specific warranty details, product support, or to purchase replacement parts, please visit the official FIT KING store or contact their customer service directly.

You can find more information and contact details on the FIT KING Brand Store.

9. Legal Disclaimer

Statements regarding this product have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for personal, non-medical use to provide comfort and relaxation.