Introduction
Thank you for choosing the EV Rider Automatic Folding 4-Wheel Mobility Scooter, Model S26. This manual provides essential information for the safe and efficient operation, maintenance, and care of your scooter. Please read this manual thoroughly before operating the scooter to ensure proper use and to maximize its lifespan.
The EV Rider TeQno mobility scooter is designed for enhanced maneuverability and stability, featuring revolutionary laser guidance light beams for improved safety in various environments. Its automatic folding mechanism offers unparalleled convenience for transport and storage.
Safety Information
WARNING: Failure to follow these safety instructions could result in injury or damage to the scooter.
- Always operate the scooter on stable, level surfaces. While designed for uneven terrain, exercise caution.
- Do not exceed the maximum load capacity of 250 lbs (113 kg).
- Ensure the battery is fully charged before extended use.
- Avoid operating the scooter in heavy rain or through standing water.
- Always use the laser guidance lights in low-light conditions or when navigating tight spaces to assess clearance.
- Keep hands and clothing clear of moving parts, especially during the automatic folding process.
- Consult a healthcare professional if you have any medical conditions that might affect your ability to operate a mobility scooter safely.
- Armrests are sold separately. If installed, ensure they are securely fastened before use.
Setup
Unboxing and Initial Inspection
Carefully remove all components from the packaging. Inspect the scooter for any signs of damage that may have occurred during shipping. If any damage is found, contact your dealer immediately.
Unfolding the Scooter
The EV Rider TeQno features an automatic folding mechanism. To unfold:
- Place the folded scooter on a flat, stable surface.
- Ensure the power is off.
- Locate the key fob or the automatic folding button on the scooter's control panel.
- Press and hold the unfold button until the scooter is fully extended and locked into place.
Figure 1: The EV Rider TeQno Mobility Scooter in its fully unfolded, ready-to-use state. This image shows the seat, tiller, and four wheels.
Charging the Battery
Before first use, fully charge the lithium battery. The charging time is approximately 8 hours.
- Locate the charging port on the scooter.
- Connect the charger to the scooter's charging port.
- Plug the charger into a standard electrical outlet.
- The charging indicator light on the charger will change color (e.g., red to green) when charging is complete.
- Disconnect the charger once charging is complete.
Operating Instructions
Starting and Stopping
- To start the scooter, ensure the smart key fob is within range or use the designated power button.
- To stop, release the throttle control. The electromagnetic brake will engage automatically.
Driving Controls
The scooter is operated via a tiller-mounted control panel. Familiarize yourself with the throttle lever, speed adjustment dial, and horn button.
Using Laser Guidance Lights
The TeQno scooter is equipped with unique laser guidance light beams to assist with navigation and obstacle avoidance.
- Ensure the scooter is powered on.
- Locate the laser activation button on the control panel.
- Press the button to activate the laser beams. These beams project forward, indicating the scooter's path and helping you gauge clearance in tight spaces or around obstacles.
- Press the button again to deactivate the lasers when not needed.
Automatic Folding
To fold the scooter for transport or storage:
- Ensure the scooter is powered off and on a flat surface.
- Locate the key fob or the automatic folding button on the scooter's control panel.
- Press and hold the fold button until the scooter is fully collapsed.
Figure 2: The EV Rider TeQno Mobility Scooter in its compact, folded configuration, viewed from the front.
Figure 3: Side view of the EV Rider TeQno Mobility Scooter in its folded state, highlighting its compact profile for storage or transport.
Maintenance
Cleaning
Clean the scooter regularly with a damp cloth and mild detergent. Avoid using abrasive cleaners or direct water spray, which can damage electrical components.
Battery Care
- Charge the battery after each use, even if only for a short period.
- If storing the scooter for an extended period, charge the battery at least once a month to maintain its health.
- Store the battery in a cool, dry place.
Tire Pressure
Periodically check the pneumatic tires for proper inflation. Refer to the tire sidewall for recommended pressure. Proper tire pressure ensures optimal performance and range.
General Inspection
Regularly inspect all nuts, bolts, and fasteners to ensure they are tight. Check for any signs of wear or damage to cables, connections, and structural components. If you notice any issues, contact a qualified service technician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on. | Battery is discharged or not connected. | Charge the battery. Ensure battery is properly seated. |
| Scooter does not move when throttle is applied. | Brake engaged, power off, or fault. | Ensure power is on. Check for error codes. Consult manual or technician if problem persists. |
| Automatic folding mechanism not working. | Low battery, obstruction, or mechanism fault. | Charge battery. Check for obstructions. Do not force the mechanism. Contact service. |
| Laser guidance lights not activating. | Scooter not powered on, or light fault. | Ensure scooter is on. Check connections. |
If you encounter a problem not listed here, or if the suggested solutions do not resolve the issue, please contact EV Rider customer support or an authorized service center.
Specifications
| Feature | Detail |
|---|---|
| Model Number | S26 |
| Overall Length | 36” (91.4 cm) |
| Overall Width | 24” (61 cm) |
| Overall Height (Max Tiller) | 35” (89 cm) |
| Folded Length | 32” (81.3 cm) |
| Folded Width | 24” (61 cm) |
| Folded Height | 20” (50.8 cm) |
| Weight with Battery | 73 lbs (33.1 kg) |
| Weight without Batteries | 65 lbs (29.5 kg) |
| Load Capacity | 250 lbs (113 kg) |
| Battery Type | 25.2V 11.5 AH Lithium battery |
| Charging Time | 8 hours |
| Driving Range | Up to 9 miles (14.5 km) |
| Ground Clearance | 2.5” (6.35 cm) |
| Turning Radius | 55” (139.7 cm) |
| Tire Type | Pneumatic |
| Climbing Angle (Max Recommended) | 3° |
| Material | Alloy Steel, Aluminum, Stainless Steel |
Warranty and Support
For warranty information, please refer to the warranty card included with your purchase or visit the official EV Rider website. Keep your proof of purchase for warranty claims.
For technical support, parts, or service inquiries, please contact your authorized EV Rider dealer or EV Rider customer service directly. Provide your model number (S26) and serial number when contacting support.
Note: Armrests are sold separately and are not included with the standard scooter package.
