Product Overview
The OVE Decors Breeze 34 in. Corner Shower Frosted Sliding Door with Base in Black is designed to provide a functional and aesthetically pleasing shower solution for various bathroom sizes. This comprehensive kit includes an acrylic shower base, acrylic shower walls, and a 34-inch corner glass shower door with all necessary hardware.
Key features include a curved design with reversible sliding door installation, 6mm frosted style tempered glass for privacy and safety, and a durable fiberglass-reinforced acrylic base. The system is designed for efficient use of space, making it suitable for smaller to mid-sized bathrooms.
Figure 1: OVE Decors Breeze 34 in. Corner Shower Frosted Sliding Door with Base in Black.
Safety Information
Before beginning installation, it is crucial to verify that this product complies with all local building and plumbing codes. Codes may vary by state and region. OVE Decors assumes no responsibility for code compliance. Always wear appropriate personal protective equipment, such as safety glasses and gloves, during installation. Handle glass components with extreme care to prevent injury.
Parts List
The OVE Decors Breeze shower kit includes the following main components:
- Acrylic Shower Base (Fiberglass Reinforced)
- Acrylic Shower Walls (2-piece)
- 34 inch Corner Glass Shower Door (Frosted Sliding)
- Hardware (including rollers, magnetic strips, handles, and fasteners)
Figure 2: Visual representation of the main components included in the shower kit: Shower Door, Shower Walls, and Shower Base.
Setup and Installation
This shower enclosure is designed for installation by professional contractors or experienced DIYers. Detailed step-by-step instructions are provided in the official Installation Manual. It is highly recommended to review the manual thoroughly before beginning any work.
Pre-Installation Considerations
- Ensure the installation area is level and prepared according to plumbing and building codes.
- Verify all parts are present and undamaged before starting assembly.
- Familiarize yourself with the dimensions of the shower door and base to ensure proper fit within your bathroom space.
Figure 3: The shower enclosure components are ready for assembly, designed for professional or experienced DIY installation.
Installation Steps Overview
- Base Installation: Securely install the fiberglass-reinforced acrylic shower base. Ensure it is level and properly sealed to prevent leaks. The base features a modern corner drain and a slip-resistant surface.
Figure 4: The shower base highlighting its slip-resistant surface, fade-resistant acrylic, modern corner drain, and fiberglass-reinforced layer.
- Wall Panel Installation: Install the two-piece acrylic shower walls. These walls are designed for a complete corner installation and include integrated shelves for convenience.
Figure 5: The two-piece acrylic shower walls, designed for corner installation and featuring integrated shelves.
- Door Frame and Glass Installation: Assemble the door frame and install the 6mm frosted tempered safety glass panels. The glass is heat and shatter resistant.
Figure 6: Detail showing the solid durable construction with 6mm (1/4") thick certified safety tempered glass, which is heat and shatter resistant.
- Sliding Door Mechanism: Install the premium roller system for smooth door operation. The door features a reversible design, allowing installation for left or right-hand opening.
Figure 7: The premium roller system ensuring smooth door opening, shutting, and secure closure.
Figure 8: Illustration of the reversible door installation, allowing choice of opening direction for left or right wall setup.
- Hardware and Sealing: Attach handles and ensure all joints are properly sealed with high-quality silicone to prevent water leakage. The door includes a magnetic strip for a secure close. Handles are treated with metal protective technology to maintain shine.
Figure 9: Detail of the magnetic strip designed for a secure close, preventing leaks and wet floors.
Figure 10: The shower door handle, featuring metal protective technology to keep hardware shiny and spotless.
Figure 11: Available hardware finishes for the shower enclosure: Black, Satin Nickel, and Chrome.
For detailed measurements and installation guidance, refer to the official Installation Manual and User Guide provided by OVE Decors.
Operating Instructions
The OVE Decors Breeze shower door operates on a smooth sliding mechanism. To open or close the door, gently slide it along the track using the handle. Ensure the door is fully closed after use to engage the magnetic seal and prevent water from escaping the enclosure.
Figure 12: The comfortable walk-through opening of the shower door, designed for effortless entry and exit.
Maintenance
Regular cleaning and maintenance will ensure the longevity and appearance of your OVE Decors Breeze shower enclosure.
- Glass Cleaning: Use a soft cloth and a non-abrasive glass cleaner to clean the frosted glass. Avoid harsh chemicals or abrasive pads that could scratch the surface or damage the frosting.
- Acrylic Cleaning: Clean the acrylic walls and base with mild soap and water. Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the acrylic finish.
- Hardware Maintenance: Wipe down metal components with a soft, damp cloth. Avoid using abrasive cleaners on the hardware to preserve its finish.
- Track Maintenance: Periodically clean the sliding door tracks to remove any soap scum or debris that could impede smooth operation.
- Seal Inspection: Regularly inspect the silicone seals around the base and wall panels for any signs of wear or damage. Re-seal as necessary to prevent leaks.
Troubleshooting
This section addresses common issues that may arise during the use of your shower enclosure.
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not slide smoothly. | Debris in tracks, worn rollers, misaligned door. | Clean tracks thoroughly. Inspect and replace worn rollers. Refer to the installation manual for door alignment adjustments. |
| Water leaks from enclosure. | Damaged or improperly applied sealant, door not closing completely. | Inspect all sealed areas and re-apply silicone sealant where necessary. Ensure the magnetic strip engages fully when the door is closed. |
| Base or walls appear cracked. | Impact damage, improper installation, manufacturing defect. | Contact customer support for assistance. Avoid further use if structural integrity is compromised. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | OVE Decors |
| Model Number | 15SKA-BRF235-BLKAC |
| Installation Type | Screw-In |
| Shape | Curved |
| Item Weight | 135.8 Pounds |
| Handle Type | Cut-out, Recessed |
| Is framed? | Yes |
| Number of Doors | 1 |
| Number Of Panels | 1 |
| Unit Count | 1.0 Count |
| Assembly Required | Yes |
| Color | Black |
| Glass Thickness | 6 Millimeters |
| UPC | 828796107341, 828796043465 |
| Product Dimensions | 34 x 34 x 76 inches (Depth x Width x Height) |
| Size | 34 Inch |
| Finish | Matte |
| Included Components | Hardware, Shower Base, Shower Door, Shower Walls |
| Material | Acrylic, Glass, Metal |
Dimensional Drawings
Figure 13: Detailed dimensions for the 34" Shower Door.
Figure 14: Detailed dimensions for the 34" Shower Base, including minimum floor space requirements.
Warranty Information
This OVE Decors product is covered by a 5-year limited manufacturer warranty. Please refer to the official warranty documentation for full terms and conditions.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please utilize the following resources:
- Official User Guide: Access the comprehensive User Guide here.
- Installation Manual: Access the detailed Installation Manual here.
- OVE Decors Store: Visit the official OVE Decors store on Amazon for more product information and support: OVE Decors Store.
