1. Introduction
Thank you for choosing Linkind Solar Pathway Lights. These solar-powered lights are designed to illuminate and enhance your outdoor spaces such as gardens, walkways, yards, patios, and driveways. Featuring automatic on/off functionality, adjustable height options, and a durable waterproof design, these lights offer a convenient and energy-efficient lighting solution.
Figure 1: Overview of Linkind Solar Pathway Lights highlighting key features.
2. Product Components
Each Linkind Solar Pathway Light unit consists of the following parts:
- Light Head: Contains the solar panel, LED light source, and control button.
- Extension Poles: Two modular pole sections for adjustable height.
- Ground Stake: Pointed stake for secure installation into the ground.
Figure 2: Disassembled view of a single Linkind Solar Pathway Light unit.
3. Setup and Installation
Follow these steps to assemble and install your solar pathway lights:
- Assemble the Light: Connect the desired number of extension poles to the light head and then attach the ground stake to the bottom. You can choose from four different height combinations based on your preference and the installation area.
- Activate the Light: Locate the red power button on the underside of the solar panel. Press the button once to activate the default low light mode.
- Initial Charging: Place the assembled lights in direct sunlight for 1-2 days to ensure a full initial charge. This allows the internal battery to reach its maximum capacity before first use.
- Install in Ground: Insert the ground stake vertically into soft soil in your desired location. Ensure the solar panel is exposed to direct sunlight for optimal charging.
Figure 3: Illustration of various height options for assembly.
Installation Video Guide
Video 1: Detailed overview, installation, and light demonstration of Linkind Solar Pathway Lights.
4. Operating Instructions
The Linkind Solar Pathway Lights are designed for ease of use with automatic functionality and multiple lighting modes.
- Automatic On/Off: The lights feature a light sensor that automatically turns them on at dusk and off at dawn, provided they are in an active lighting mode.
- Changing Lighting Modes: Use the red power button on the light head to cycle through the available modes:
- Press 1x: Low Light Mode (lasts up to 12 hours on a full charge).
- Press 2x: High Light Mode (lasts up to 6 hours on a full charge).
- Press 3x: Gradual Breathing Mode (light slowly dims and brightens, lasts up to 12 hours).
- Press 4x: Off (turns the light off completely).
Figure 4: Visual representation of the three lighting modes and their durations.
Figure 5: Automatic charging during the day and lighting at night.
5. Maintenance
To ensure optimal performance and longevity of your Linkind Solar Pathway Lights, follow these maintenance guidelines:
- Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures efficient charging.
- Placement: Ensure the lights are placed in an area that receives at least 6-8 hours of direct sunlight daily. Avoid shaded areas.
- Weather Resistance: The lights are IP65 waterproof, providing excellent resistance against rain and other weather conditions. However, prolonged submersion is not recommended.
Figure 6: The lights are designed to be waterproof for outdoor use.
6. Troubleshooting
If your solar pathway lights are not functioning as expected, consider the following:
- Light Not Turning On: Ensure the light is in an active mode (not 'Off'). Press the red button to cycle through modes. Verify the solar panel is receiving sufficient direct sunlight.
- Short Lighting Duration: Make sure the solar panel is clean and free from obstructions. Relocate the light to an area with more direct sunlight if necessary.
- Dim Light Output: Allow 1-2 full days of charging in direct sunlight for the battery to reach full capacity.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Linkind |
| Model Number | LL28004-WW-US-8 |
| Color | SP4-Warm White |
| Material | Plastic (Acrylonitrile Butadiene Styrene) |
| Power Source | Solar Powered |
| Light Source Type | LED |
| Brightness | 200 Lumens |
| Light Color | Warm White (3000K) |
| Water Resistance Level | Waterproof (IP65) |
| Special Features | 2 brightness modes, Adjustable Height, Auto On/OFF and Dusk to Dawn, Convenient external switch |
| Product Dimensions | 8"L x 6"W x 4"H (variable height) |
| Item Weight | 4.69 pounds (for 8-pack) |
| Batteries | 1 Lithium Ion battery required (included) |
Figure 7: Key lighting specifications: 3000K warm light and 200 lumens brightness.
8. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the documentation included with your purchase or contact Linkind customer service directly. Contact details are typically provided in the product packaging or on the official Linkind website.
