Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Ecoprsio 32-inch Rustic Brown Entryway Table. Please read these instructions carefully before assembly and use to ensure safe and proper functionality.
Safety Information
- Always unplug the electrical outlet before cleaning or moving the table.
- Do not overload the shelves or drawers.
- Ensure the table is properly assembled and stable before use.
- Keep the electrical outlet and USB ports away from water and heat sources.
- Always follow the manufacturer's instructions for safe use and assembly.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. Refer to the included parts list in your package for specific component identification.
- Tabletop with 2 Drawers
- Metal Frame Components
- 2 Mesh Storage Shelves
- Electrical Outlet Board (2 AC outlets, 2 USB ports)
- Power Cord (6.56 FT)
- Adjustable Foot Pads
- Assembly Hardware (screws, etc.)
- Installation Tool
- Velcro Tape for cable management
Setup and Assembly
Assembly is designed to be straightforward. All parts are labeled with letters, and hardware is numbered for easy identification. An installation tool is included. A hammer may be useful for gently tapping in adjustable footings and drawer stops.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Attach the metal frame components according to the detailed instructions provided in your package. Ensure all screws are finger-tightened initially.
- Secure the tabletop to the assembled frame.
- Install the two drawers into their designated slots. The drawers are designed with internal stops to prevent them from falling out when fully extended.
- Insert the two mesh storage shelves into the lower sections of the frame.
- Attach the electrical outlet board to either side of the table frame, as preferred.
- Screw in the adjustable foot pads at the bottom of each leg. Use a hammer if needed to gently tap them into place.
- Once all components are in place, fully tighten all screws.


Operating Instructions
Using the Power Outlets and USB Ports
The table is equipped with an integrated power strip featuring 2 standard AC outlets (120V/12A) and 2 USB ports (5V/2.1A).
- Plug the table's power cord (6.56 FT) into a functional wall outlet.
- Use the AC outlets to power lamps, small appliances, or other electronic devices.
- Use the USB ports to charge mobile phones, tablets, smartwatches, and other USB-powered devices.
- Utilize the included velcro tape to manage and organize the power cord and any connected device cables, preventing clutter.
Drawer Functionality
The two drawers provide enclosed storage for smaller items. They are designed with internal stops to prevent accidental removal when pulled out.
Adjustable Foot Pads
The adjustable foot pads at the base of each leg allow for minor height adjustments to ensure the table remains stable on uneven surfaces. Rotate the pads clockwise or counter-clockwise to raise or lower each corner until the table is level and stable.
Maintenance
To maintain the appearance and longevity of your table:
- Cleaning: Wipe with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Promptly wipe up any spills to prevent staining, especially on the engineered wood surfaces.
- Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Electrical Components: Ensure the power cord and outlets are free from damage. Do not attempt to repair electrical components yourself.
Troubleshooting
Table Wobbles
Adjust the foot pads at the bottom of each leg until the table is stable on the floor.
Power Outlets/USB Ports Not Working
- Ensure the table's main power cord is securely plugged into a functional wall outlet.
- Check if the wall outlet itself is receiving power (test with another device).
- Avoid overloading the outlets. If too many high-power devices are connected, it may trip a circuit breaker.
- If the issue persists, discontinue use and contact customer support.
Drawers Stick or Don't Slide Smoothly
- Ensure the drawers are correctly aligned within their tracks.
- Check for any obstructions inside the drawer or along the tracks.
- Verify that the table is level using the adjustable foot pads.
Specifications
| Feature | Detail |
|---|---|
| Brand | Ecoprsio |
| Model Name | Ecoprsio |
| Product Dimensions (D x W x H) | 11.8"D x 32"W x 31.8"H |
| Color | Rustic Brown |
| Material Type | Engineered Wood, Metal |
| Frame Material | Metal |
| Top Material | Engineered Wood |
| Number of Drawers | 2 |
| Number of Shelves | 3 (including top surface) |
| Power Outlets | 2 AC Outlets (120V/12A) |
| USB Ports | 2 USB Ports (5V/2.1A) |
| Power Cord Length | 6.56 Feet |
| Style | Farmhouse |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
Ecoprsio provides customer support for any issues related to quality or assembly. If you encounter any problems with your entryway table, please contact Ecoprsio customer service.
Contact Information: Refer to the contact details provided in your product packaging or visit the official Ecoprsio website for support.
Product Images






Product Videos
No official seller-provided product videos were found for this model.