1. Introduction
This manual provides instructions for the SANSI 20W Full Spectrum Dual Gooseneck Clip Plant Grow Light. This product is designed to provide optimal light for indoor plants throughout their growth cycles, from germination to fruiting. Please read this manual thoroughly before use to ensure proper operation and safety.
Image: The SANSI Dual Gooseneck Clip Grow Light positioned between two tables, providing light to various potted indoor plants.
2. Safety Instructions
- Ensure the power source voltage matches the product's specified voltage (120 Volts AC).
- The maximum safety wattage rating is 10 watts for each light head. Do not exceed this rating.
- The light bulbs can become hot during operation. Avoid touching the bulbs directly when the light is on or immediately after turning it off to prevent burns. Allow sufficient time for cooling before handling.
- Do not immerse the product in water. This product is water-resistant, not waterproof.
- Ensure the clip is securely attached to a stable surface to prevent the light from falling.
- Keep out of reach of children and pets.
- Do not attempt to disassemble or modify the product beyond bulb replacement.
3. Package Contents
Verify that all components are present in the package:
- 1 x SANSI Dual Gooseneck Clip Grow Light Fixture
- 2 x E26 LED Grow Light Bulbs (pre-installed or included separately)
4. Product Features
- Full Spectrum Lighting: Provides light across the 400nm-780nm visible spectrum, suitable for all stages of plant growth. Offers 4000K daylight with a Color Rendering Index (CRI) close to 95, mimicking natural sunlight.
- High PPFD Output: Delivers a Photosynthetic Photon Flux Density (PPFD) of 402 µmol/s/m² at 1 foot, promoting robust plant growth.
- Energy Efficient: Consumes 20W of power, offering light output comparable to 300W incandescent bulbs, leading to significant energy savings.
- 360° Adjustable Goosenecks: Flexible goosenecks allow precise positioning of light for comprehensive plant coverage.
- Replaceable Bulbs: Designed for easy bulb replacement, extending product lifespan and reducing waste.
- Patented Ceramic Technology: Utilizes a non-conductive ceramic heat sink for efficient heat dissipation, enhancing LED chip reliability and light efficiency.
- ETL Certified: Ensures product quality and safety standards are met.
Image: A chart illustrating the full spectrum light distribution (400nm-780nm) and its benefits for different plant growth stages.
Image: An internal diagram of the SANSI bulb, highlighting the patented ceramic technology for heat dissipation.
5. Specifications
| Specification | Detail |
|---|---|
| Model Number | f4ef5d66-c5e5-4fe4-a3b0-617b9c5c59fe |
| Wattage | 20 Watts (10W per head) |
| Voltage | 120 Volts (AC) |
| Light Source Type | LED |
| Color Temperature | 4000 Kelvin |
| Color Rendering Index (CRI) | 95.00 |
| Brightness | 1800 Lumen |
| Product Dimensions | 7.72"D x 7.17"W x 2.99"H |
| Item Weight | 1.65 pounds |
| Material | Ceramic, Aluminum |
| Bulb Base | E26 |
| Mounting Type | Tabletop (Clip-on) |
| Control Method | Push Button |
| Indoor/Outdoor Usage | Indoor |
| Power Cord Length | 6 feet (approx.) |
Image: A visual representation of the grow light's dimensions and key features like the strong clamp and 360° gooseneck.
6. Setup Instructions
- Unpack: Carefully remove all components from the packaging.
- Install Bulbs (if not pre-installed): Screw the E26 LED grow light bulbs into the lamp holders until secure. Do not overtighten.
- Attach Clip: Securely attach the strong clamp to a stable surface such as a table edge, shelf, or plant stand. Ensure the surface is thick and sturdy enough to hold the light's weight without wobbling. The clamp is designed with a gasket to protect furniture.
- Position Goosenecks: Adjust the flexible goosenecks to direct the light towards your plants. The 360° adjustability allows for precise light placement.
- Connect Power: Plug the power cord into a standard 120V AC electrical outlet.
Image: A detailed view of the high-quality clamp mechanism, demonstrating its secure attachment to a surface.
7. Operating Instructions
- Power On/Off: Use the push-button switch located on the power cord to turn the grow light on or off.
- Adjust Light Direction: Gently bend the flexible goosenecks to aim the light heads at your plants. Ensure the light covers the desired area.
- Optimal Distance: Maintain an appropriate distance between the light and your plants. Refer to the 'Plant Growth Guide' section for recommended distances based on plant type and growth stage.
- Lighting Schedule: Establish a consistent lighting schedule for your plants. Most indoor plants benefit from 12-18 hours of light per day, depending on their specific needs. Consider using an external timer for automated control.
8. Plant Growth Guide
This grow light is suitable for different plant stages for most plants. The table below provides general recommendations for distance and lighting duration. Adjust as needed based on specific plant requirements and observed growth.
Image: A guide detailing optimal light distance and duration for various plant types and growth stages.
| Plant Type | Recommended Distance (inches) | Time (Hours/Day) | Coverage (SQ FT) |
|---|---|---|---|
| Succulents | 13.77 | 6-8 | 1.5 ft² |
| Monstera | 11.81 | 6-8 | 1.07 ft² |
| Basil | 11.81 | ≥6 | 3.01 ft² |
| Orchid | 13.78 | 14-16 | 1.5 ft² |
| Tomato | 13.78 | 8-9 | 1.5 ft² |
Image: Visual examples of plant development and flowering promoted by the grow light.
9. Maintenance
- Cleaning: Ensure the light is unplugged and cooled before cleaning. Wipe the light heads and goosenecks with a soft, dry cloth. Do not use abrasive cleaners or liquids directly on the bulbs or electrical components.
- Bulb Replacement: If a bulb needs replacement, ensure the unit is unplugged and cool. Unscrew the old E26 bulb and screw in a new SANSI E26 LED grow light bulb.
- Storage: If storing the grow light for an extended period, unplug it, clean it, and store it in a dry, cool place away from direct sunlight.
10. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power; Loose bulb; Faulty switch/cord | Check power outlet; Ensure plug is fully inserted; Tighten bulbs; Inspect switch/cord for damage. |
| Light is dim or flickers | Loose bulb; Bulb nearing end of life; Incompatible power source | Tighten bulbs; Replace bulb; Ensure power source is 120V AC. |
| Bulbs get excessively hot | Normal operation (LEDs produce heat); Insufficient ventilation | This is normal for high-power LEDs. Avoid direct contact. Ensure adequate airflow around the bulbs. |
| Clamp does not hold securely | Surface too thin/slippery; Clamp not fully tightened | Attach to a thicker, more stable surface; Ensure clamp is fully engaged and tightened. |
11. Warranty and Support
SANSI products are manufactured to high-quality standards. This product includes:
- Lifetime Free Bulb Replacement: SANSI offers a lifetime warranty for the included grow light bulbs. Contact SANSI customer support for replacement bulbs.
- ETL Listed Certification: This product has been tested and certified for quality and safety.
For further assistance, technical support, or warranty claims, please contact SANSI customer service through their official website or the retailer where the product was purchased.
Image: SANSI grow light bulbs highlighting the lifetime free replacement policy.
