Sunbeam Velvet Rich Soft Electric Heating Blanket

Sunbeam Velvet Rich Soft Electric Heating Blanket

Model: Velvet Rich Soft Electric Heating Blanket

Introduction

This manual provides important information for the safe and effective use of your Sunbeam Velvet Rich Soft Electric Heating Blanket. Please read all instructions carefully before use and retain this manual for future reference.

The Sunbeam Velvet heated throw blanket features a ThermoFine warming system designed to sense and adjust to deliver consistent warmth. It includes 3 heating levels and an easy-to-operate control. The blanket is made of 100% polyester and is machine washable and dryer safe.

Important Safety Information

WARNING: To reduce the risk of burns, electric shock, fire, or injury to persons, this product must be used in accordance with the following instructions:

  • Do not use with infants, children, invalids, or persons insensitive to heat.
  • Do not use on a person who cannot operate the controls properly.
  • Do not use with a damaged cord or plug.
  • Do not use with pins or other metallic objects.
  • Do not use folded, bunched, or tucked in.
  • Do not use if wet.
  • Do not use with other heating devices.
  • Do not dry clean. Cleaning liquids may damage the insulation of the heating element.
  • This throw is only for use in USA.
  • Always unplug the blanket when not in use.

The Sunbeam Advantage: The heated wire is made with premium components, providing fast, even warmth and features to help prevent overheating. Dual safety circuits monitor the throw's operations during use.

Sunbeam Advantage features on product packaging

Image: Product packaging highlighting "The Sunbeam Advantage" with details on safety and even warmth.

Setup

  1. Unpack: Carefully remove the electric heating blanket from its packaging.
  2. Inspect: Before first use, inspect the blanket for any signs of damage, including the fabric, control, and power cord. Do not use if damaged.
  3. Connect Control: Ensure the control connector is firmly plugged into the blanket's module.
  4. Power Connection: Plug the power cord into a 120V AC electrical outlet. Ensure the outlet is easily accessible.
Sunbeam Velvet Heated Throw Blanket in packaging

Image: The Sunbeam Velvet Heated Throw Blanket shown in its retail packaging, indicating size and key features.

Operating Instructions

Your Sunbeam Electric Heating Blanket features a simple push-button control for ease of use.

  1. Turning On: Press the power button on the control. The indicator light will illuminate.
  2. Adjusting Heat Settings: Press the heat setting button to cycle through the 3 available heat levels (Low, Medium, High). Select your desired warmth level.
  3. Auto Shut-Off: The blanket is equipped with a 3-hour auto shut-off feature for safety and energy conservation. After approximately 3 hours of continuous use, the blanket will automatically turn off.
  4. Turning Off: To manually turn off the blanket, press the power button until the indicator light extinguishes, or simply unplug the blanket from the wall outlet.

Note: It may take a few minutes for the blanket to reach your selected temperature.

Maintenance and Care

Proper care will ensure the longevity and performance of your electric heating blanket.

Washing Instructions:

The Sunbeam Velvet Rich Soft Electric Heating Blanket is fully machine washable and dryer safe.

  1. Disconnect: Always disconnect the control from the blanket and unplug the power cord from the wall outlet before washing.
  2. Pre-soak (Optional): For best results, pre-soak the blanket for 15 minutes in cold water with a mild detergent.
  3. Machine Wash: Wash on the gentle or delicate cycle in a washing machine with cold water (maximum 30°C / 86°F). Do not bleach.
  4. Rinse: Rinse on the normal cycle.
  5. Machine Dry: Tumble dry on low heat or air dry. Ensure the blanket is completely dry before reconnecting the control and using. Do not iron.
  6. Storage: When not in use, store the blanket loosely folded in a cool, dry place. Avoid tightly folding or creasing the heating wires.

IMPORTANT: Do not dry clean. Dry cleaning solvents may damage the insulation of the heating element.

Troubleshooting

If your electric heating blanket is not operating correctly, please refer to the following common issues and solutions:

Problem Possible Cause Solution
Blanket does not heat.
  • Not plugged in.
  • Control not properly connected to blanket.
  • Power outage.
  • Auto shut-off activated.
  • Ensure power cord is securely plugged into a working outlet.
  • Check that the control connector is firmly attached to the blanket module.
  • Verify power to the outlet.
  • Unplug and re-plug the blanket to reset the auto shut-off.
Blanket heats unevenly.
  • Blanket is bunched or folded.
  • Lay the blanket flat and smooth out any folds or bunches.
Control light flashes or blinks.
  • System error or malfunction.
  • Unplug the blanket from the wall outlet for 5 minutes, then plug it back in. If the issue persists, contact customer support.

Specifications

Brand: Sunbeam
Model: Velvet Rich Soft Electric Heating Blanket
Dimensions: 50 inches (L) x 60 inches (W)
Material: 100% Polyester (Velvet Fabric)
Heat Settings: 3
Auto Shut-Off: 3 Hours
Power Source: Corded Electric (120V AC)
Care Instructions: Machine Washable, Dryer Safe
Item Weight: 3.3 pounds
UPC: 053891164429
Illustration of blanket dimensions

Image: An illustration showing the approximate dimensions of the blanket (50" x 60").

Warranty and Support

Your Sunbeam Velvet Rich Soft Electric Heating Blanket comes with a 5-year manufacturer warranty.

For warranty claims, technical support, or any questions regarding your product, please contact Sunbeam Customer Service. Refer to the contact information provided on the product packaging or the official Sunbeam website.

Please have your model number and purchase date available when contacting support.

Online Resources: For additional information, FAQs, and product registration, visit the official Sunbeam website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.